Updated Home (markdown)
parent
3eb649ae74
commit
d3be57eae7
19
Home.md
19
Home.md
|
@ -1,3 +1,20 @@
|
|||
## Links
|
||||
## Setup Arduino IDE
|
||||
|
||||
1. Install Arduino IDE 1.8.x - https://www.arduino.cc/en/software - Instructions may require extra steps to allow for serial/usb access. Read all instructions carefully.
|
||||
1. Follow these instructions _**carefully**_ as well - https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/Installation
|
||||
1. Note I used the `Arduino SAM Boards (32-bits ARM) Cortext-M3)` version `1.6.12`
|
||||
1. Additional Help https://sites.google.com/site/ericmklaus/projects-1/stm32f103-minimum-system-development-board/arduino-ide-for-stm32103-board
|
||||
1. Some additional hints here - https://github.com/ztto/ArdSCSino-stm32/issues/5
|
||||
1. Install SdFat - Tools -> Manage Libraries -> SdFat by Bill Greiman version `1.1.4`
|
||||
1. Make sure the correct board is selected `Generic STM32F103C series` - Copy the latest `.ino` file into a sketch and compile.
|
||||
1. Flash using your preferred method.
|
||||
|
||||
|
||||
## Flashing
|
||||
|
||||
Soon.
|
||||
|
||||
## Making Gerber files
|
||||
|
||||
https://support.jlcpcb.com/article/44-how-to-export-kicad-pcb-to-gerber-files
|
||||
|
||||
|
|
Loading…
Reference in New Issue