Macintosh-HW/MacPlus_MiSTer
1
0
Fork 0
mirror of https://github.com/MiSTer-devel/MacPlus_MiSTer.git synced 2025-02-20 05:29:03 +00:00
Code Issues Projects Releases Wiki Activity
MacPlus_MiSTer/sys/sys_top.v
sorgelig e956ad2f37 Update sys.
2020-01-22 00:55:46 +08:00

1463 lines
32 KiB
Verilog
Raw Blame History

//============================================================================
//
// MiSTer hardware abstraction module
// (c)2017-2020 Alexey Melnikov
//
// This program is free software; you can redistribute it and/or modify it
// under the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 of the License, or (at your option)
// any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
// more details.
//
// You should have received a copy of the GNU General Public License along
// with this program; if not, write to the Free Software Foundation, Inc.,
// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
//
//============================================================================
`ifndef ARCADE_SYS
`define USE_DDRAM
`define USE_SDRAM
`endif
module sys_top
(
/////////// CLOCK //////////
input FPGA_CLK1_50,
input FPGA_CLK2_50,
input FPGA_CLK3_50,
//////////// HDMI //////////
output HDMI_I2C_SCL,
inout HDMI_I2C_SDA,
output HDMI_MCLK,
output HDMI_SCLK,
output HDMI_LRCLK,
output HDMI_I2S,
output HDMI_TX_CLK,
output HDMI_TX_DE,
output [23:0] HDMI_TX_D,
output HDMI_TX_HS,
output HDMI_TX_VS,
input HDMI_TX_INT,
//////////// SDR ///////////
output [12:0] SDRAM_A,
inout [15:0] SDRAM_DQ,
output SDRAM_DQML,
output SDRAM_DQMH,
output SDRAM_nWE,
output SDRAM_nCAS,
output SDRAM_nRAS,
output SDRAM_nCS,
output [1:0] SDRAM_BA,
output SDRAM_CLK,
output SDRAM_CKE,
`ifdef DUAL_SDRAM
////////// SDR #2 //////////
output [12:0] SDRAM2_A,
inout [15:0] SDRAM2_DQ,
output SDRAM2_nWE,
output SDRAM2_nCAS,
output SDRAM2_nRAS,
output SDRAM2_nCS,
output [1:0] SDRAM2_BA,
output SDRAM2_CLK,
`else
//////////// VGA ///////////
output [5:0] VGA_R,
output [5:0] VGA_G,
output [5:0] VGA_B,
inout VGA_HS, // VGA_HS is secondary SD card detect when VGA_EN = 1 (inactive)
output VGA_VS,
input VGA_EN, // active low
/////////// AUDIO //////////
output AUDIO_L,
output AUDIO_R,
output AUDIO_SPDIF,
//////////// SDIO ///////////
inout [3:0] SDIO_DAT,
inout SDIO_CMD,
output SDIO_CLK,
//////////// I/O ///////////
output LED_USER,
output LED_HDD,
output LED_POWER,
input BTN_USER,
input BTN_OSD,
input BTN_RESET,
`endif
////////// I/O ALT /////////
output SD_SPI_CS,
input SD_SPI_MISO,
output SD_SPI_CLK,
output SD_SPI_MOSI,
inout SDCD_SPDIF,
output IO_SCL,
inout IO_SDA,
////////// ADC //////////////
output ADC_SCK,
input ADC_SDO,
output ADC_SDI,
output ADC_CONVST,
////////// MB KEY ///////////
input [1:0] KEY,
////////// MB SWITCH ////////
input [3:0] SW,
////////// MB LED ///////////
output [7:0] LED,
///////// USER IO ///////////
inout [6:0] USER_IO
);
////////////////////// Secondary SD ///////////////////////////////////
wire SD_CS, SD_CLK, SD_MOSI;
`ifdef ARCADE_SYS
assign SD_CS = 1'bZ;
assign SD_CLK = 1'bZ;
assign SD_MOSI = 1'bZ;
`else
`ifndef DUAL_SDRAM
wire sd_miso = SW[3] | SDIO_DAT[0];
`else
wire sd_miso = 1;
`endif
wire SD_MISO = mcp_sdcd ? sd_miso : SD_SPI_MISO;
`endif
`ifndef DUAL_SDRAM
assign SDIO_DAT[2:1]= 2'bZZ;
assign SDIO_DAT[3] = SW[3] ? 1'bZ : SD_CS;
assign SDIO_CLK = SW[3] ? 1'bZ : SD_CLK;
assign SDIO_CMD = SW[3] ? 1'bZ : SD_MOSI;
assign SD_SPI_CS = mcp_sdcd ? ((~VGA_EN & sog & ~cs1) ? 1'b1 : 1'bZ) : SD_CS;
`else
assign SD_SPI_CS = mcp_sdcd ? 1'bZ : SD_CS;
`endif
assign SD_SPI_CLK = mcp_sdcd ? 1'bZ : SD_CLK;
assign SD_SPI_MOSI = mcp_sdcd ? 1'bZ : SD_MOSI;
////////////////////// LEDs/Buttons ///////////////////////////////////
reg [7:0] led_overtake = 0;
reg [7:0] led_state = 0;
wire led_p = led_power[1] ? ~led_power[0] : 1'b0;
wire led_d = led_disk[1] ? ~led_disk[0] : ~(led_disk[0] | gp_out[29]);
wire led_u = ~led_user;
wire led_locked;
`ifndef DUAL_SDRAM
assign LED_POWER = (SW[3] | led_p) ? 1'bZ : 1'b0;
assign LED_HDD = (SW[3] | led_d) ? 1'bZ : 1'b0;
assign LED_USER = (SW[3] | led_u) ? 1'bZ : 1'b0;
`endif
//LEDs on main board
assign LED = (led_overtake & led_state) | (~led_overtake & {1'b0,led_locked,1'b0, ~led_p, 1'b0, ~led_d, 1'b0, ~led_u});
wire btn_r, btn_o, btn_u;
`ifdef DUAL_SDRAM
assign {btn_r,btn_o,btn_u} = {mcp_btn[1],mcp_btn[2],mcp_btn[0]};
`else
assign {btn_r,btn_o,btn_u} = ~{BTN_RESET,BTN_OSD,BTN_USER} | {mcp_btn[1],mcp_btn[2],mcp_btn[0]};
`endif
wire [2:0] mcp_btn;
wire mcp_sdcd;
mcp23009 mcp23009
(
.clk(FPGA_CLK2_50),
.btn(mcp_btn),
.led({led_p, led_d, led_u}),
.sd_cd(mcp_sdcd),
.scl(IO_SCL),
.sda(IO_SDA)
);
reg btn_user, btn_osd;
always @(posedge FPGA_CLK2_50) begin
integer div;
reg [7:0] deb_user;
reg [7:0] deb_osd;
div <= div + 1'b1;
if(div > 100000) div <= 0;
if(!div) begin
deb_user <= {deb_user[6:0], btn_u | ~KEY[1]};
if(&deb_user) btn_user <= 1;
if(!deb_user) btn_user <= 0;
deb_osd <= {deb_osd[6:0], btn_o | ~KEY[0]};
if(&deb_osd) btn_osd <= 1;
if(!deb_osd) btn_osd <= 0;
end
end
///////////////////////// HPS I/O /////////////////////////////////////
// gp_in[31] = 0 - quick flag that FPGA is initialized (HPS reads 1 when FPGA is not in user mode)
// used to avoid lockups while JTAG loading
wire [31:0] gp_in = {1'b0, btn_user | btn[1], btn_osd | btn[0], SW[3], 8'd0, io_ver, io_ack, io_wide, io_dout};
wire [31:0] gp_out;
wire [1:0] io_ver = 1; // 0 - standard MiST I/O (for quick porting of complex MiST cores). 1 - optimized HPS I/O. 2,3 - reserved for future.
wire io_wait;
wire io_wide;
wire [15:0] io_dout;
wire [15:0] io_din = gp_outr[15:0];
wire io_clk = gp_outr[17];
wire io_ss0 = gp_outr[18];
wire io_ss1 = gp_outr[19];
wire io_ss2 = gp_outr[20];
//wire io_sdd = gp_outr[21]; // used only in ST core
wire io_osd_hdmi = io_ss1 & ~io_ss0;
wire io_fpga = ~io_ss1 & io_ss0;
wire io_uio = ~io_ss1 & io_ss2;
reg io_ack;
reg rack;
wire io_strobe = ~rack & io_clk;
always @(posedge clk_sys) begin
if(~(io_wait | vs_wait) | io_strobe) begin
rack <= io_clk;
io_ack <= rack;
end
end
reg [31:0] gp_outr;
always @(posedge clk_sys) begin
reg [31:0] gp_outd;
gp_outr <= gp_outd;
gp_outd <= gp_out;
end
`ifdef DUAL_SDRAM
wire [7:0] core_type = 'hA8; // generic core, dual SDRAM.
`else
wire [7:0] core_type = 'hA4; // generic core.
`endif
// HPS will not communicate to core if magic is different
wire [31:0] core_magic = {24'h5CA623, core_type};
cyclonev_hps_interface_mpu_general_purpose h2f_gp
(
.gp_in({~gp_out[31] ? core_magic : gp_in}),
.gp_out(gp_out)
);
reg [15:0] cfg;
reg cfg_got = 0;
reg cfg_set = 0;
wire vga_fb = cfg[12];
wire [1:0] hdmi_limited = {cfg[11],cfg[8]};
wire direct_video = cfg[10];
wire dvi_mode = cfg[7];
wire audio_96k = cfg[6];
wire csync_en = cfg[3];
wire ypbpr_en = cfg[5];
wire io_osd_vga = io_ss1 & ~io_ss2;
`ifndef DUAL_SDRAM
wire sog = cfg[9];
wire vga_scaler = cfg[2];
`endif
reg cfg_custom_t = 0;
reg [5:0] cfg_custom_p1;
reg [31:0] cfg_custom_p2;
reg [4:0] vol_att = 0;
reg [6:0] coef_addr;
reg [8:0] coef_data;
reg coef_wr = 0;
wire [7:0] ARX, ARY;
reg [11:0] VSET = 0;
reg [2:0] scaler_flt;
reg lowlat = 0;
reg cfg_dis = 0;
reg vs_wait = 0;
always@(posedge clk_sys) begin
reg [7:0] cmd;
reg has_cmd;
reg old_strobe;
reg [7:0] cnt = 0;
reg vs_d0,vs_d1,vs_d2;
old_strobe <= io_strobe;
coef_wr <= 0;
if(~io_uio) begin
has_cmd <= 0;
cmd <= 0;
end
else
if(~old_strobe & io_strobe) begin
if(!has_cmd) begin
has_cmd <= 1;
cmd <= io_din[7:0];
cnt <= 0;
if(io_din[7:0] == 'h30) vs_wait <= 1;
end
else begin
if(cmd == 1) begin
cfg <= io_din;
cfg_set <= 1;
end
if(cmd == 'h20) begin
cfg_set <= 0;
cnt <= cnt + 1'd1;
if(cnt<8) begin
case(cnt[2:0])
0: if(WIDTH != io_din[11:0]) WIDTH <= io_din[11:0];
1: if(HFP != io_din[11:0]) HFP <= io_din[11:0];
2: if(HS != io_din[11:0]) HS <= io_din[11:0];
3: if(HBP != io_din[11:0]) HBP <= io_din[11:0];
4: if(HEIGHT != io_din[11:0]) HEIGHT <= io_din[11:0];
5: if(VFP != io_din[11:0]) VFP <= io_din[11:0];
6: if(VS != io_din[11:0]) VS <= io_din[11:0];
7: if(VBP != io_din[11:0]) VBP <= io_din[11:0];
endcase
if(cnt == 1) begin
cfg_custom_p1 <= 0;
cfg_custom_p2 <= 0;
cfg_custom_t <= ~cfg_custom_t;
end
end
else begin
if(cnt[1:0]==0) cfg_custom_p1 <= io_din[5:0];
if(cnt[1:0]==1) cfg_custom_p2[15:0] <= io_din;
if(cnt[1:0]==2) begin
cfg_custom_p2[31:16] <= io_din;
cfg_custom_t <= ~cfg_custom_t;
cnt[2:0] <= 3'b100;
end
if(cnt == 8) {lowlat,cfg_dis} <= io_din[15:14];
end
end
if(cmd == 'h2F) begin
cnt <= cnt + 1'd1;
case(cnt[3:0])
0: {FB_EN,FB_FLT,FB_FMT} <= {io_din[15], io_din[14], io_din[5:0]};
1: FB_BASE[15:0] <= io_din[15:0];
2: FB_BASE[31:16] <= io_din[15:0];
3: FB_WIDTH <= io_din[11:0];
4: FB_HEIGHT <= io_din[11:0];
5: FB_HMIN <= io_din[11:0];
6: FB_HMAX <= io_din[11:0];
7: FB_VMIN <= io_din[11:0];
8: FB_VMAX <= io_din[11:0];
endcase
end
if(cmd == 'h25) {led_overtake, led_state} <= io_din;
if(cmd == 'h26) vol_att <= io_din[4:0];
if(cmd == 'h27) VSET <= io_din[11:0];
if(cmd == 'h2A) {coef_wr,coef_addr,coef_data} <= {1'b1,io_din};
if(cmd == 'h2B) scaler_flt <= io_din[2:0];
end
end
vs_d0 <= HDMI_TX_VS;
if(vs_d0 == HDMI_TX_VS) vs_d1 <= vs_d0;
vs_d2 <= vs_d1;
if(~vs_d2 & vs_d1) vs_wait <= 0;
end
always @(posedge clk_sys) begin
reg vsd, vsd2;
if(~cfg_ready || ~cfg_set) cfg_got <= cfg_set;
else begin
vsd <= HDMI_TX_VS;
vsd2 <= vsd;
if(~vsd2 & vsd) cfg_got <= cfg_set;
end
end
cyclonev_hps_interface_peripheral_uart uart
(
.ri(0)
`ifndef ARCADE_SYS
,
.dsr(uart_dsr),
.dcd(uart_dsr),
.dtr(uart_dtr),
.cts(uart_cts),
.rts(uart_rts),
.rxd(uart_rxd),
.txd(uart_txd)
`endif
);
wire aspi_sck,aspi_mosi,aspi_ss,aspi_miso;
cyclonev_hps_interface_peripheral_spi_master spi
(
.sclk_out(aspi_sck),
.txd(aspi_mosi), // mosi
.rxd(aspi_miso), // miso
.ss_0_n(aspi_ss),
.ss_in_n(1)
);
wire [63:0] f2h_irq = {HDMI_TX_VS};
cyclonev_hps_interface_interrupts interrupts
(
.irq(f2h_irq)
);
/////////////////////////// RESET ///////////////////////////////////
reg reset_req = 0;
always @(posedge FPGA_CLK2_50) begin
reg [1:0] resetd, resetd2;
reg old_reset;
//latch the reset
old_reset <= reset;
if(~old_reset & reset) reset_req <= 1;
//special combination to set/clear the reset
//preventing of accidental reset control
if(resetd==1) reset_req <= 1;
if(resetd==2 && resetd2==0) reset_req <= 0;
resetd <= gp_out[31:30];
resetd2 <= resetd;
end
wire clk_100m;
wire clk_hdmi = hdmi_clk_out;
wire clk_audio = FPGA_CLK3_50;
wire clk_pal = FPGA_CLK3_50;
//////////////////// SYSTEM MEMORY & SCALER /////////////////////////
wire reset;
sysmem_lite sysmem
(
//Reset/Clock
.reset_core_req(reset_req),
.reset_out(reset),
.clock(clk_100m),
//DE10-nano has no reset signal on GPIO, so core has to emulate cold reset button.
.reset_hps_cold_req(btn_r),
`ifdef USE_DDRAM
//64-bit DDR3 RAM access
.ram1_clk(ram_clk),
.ram1_address(ram_address),
.ram1_burstcount(ram_burstcount),
.ram1_waitrequest(ram_waitrequest),
.ram1_readdata(ram_readdata),
.ram1_readdatavalid(ram_readdatavalid),
.ram1_read(ram_read),
.ram1_writedata(ram_writedata),
.ram1_byteenable(ram_byteenable),
.ram1_write(ram_write),
`endif
//64-bit DDR3 RAM access
.ram2_clk(clk_audio),
.ram2_address(ram2_address),
.ram2_burstcount(ram2_burstcount),
.ram2_waitrequest(ram2_waitrequest),
.ram2_readdata(ram2_readdata),
.ram2_readdatavalid(ram2_readdatavalid),
.ram2_read(ram2_read),
.ram2_writedata(ram2_writedata),
.ram2_byteenable(ram2_byteenable),
.ram2_write(ram2_write),
//128-bit DDR3 RAM access
// HDMI frame buffer
.vbuf_clk(clk_100m),
.vbuf_address(vbuf_address),
.vbuf_burstcount(vbuf_burstcount),
.vbuf_waitrequest(vbuf_waitrequest),
.vbuf_writedata(vbuf_writedata),
.vbuf_byteenable(vbuf_byteenable),
.vbuf_write(vbuf_write),
.vbuf_readdata(vbuf_readdata),
.vbuf_readdatavalid(vbuf_readdatavalid),
.vbuf_read(vbuf_read)
);
wire [28:0] ram2_address;
wire [7:0] ram2_burstcount;
wire [7:0] ram2_byteenable;
wire ram2_waitrequest;
wire [63:0] ram2_readdata;
wire [63:0] ram2_writedata;
wire ram2_readdatavalid;
wire ram2_read;
wire ram2_write;
wire [7:0] ram2_bcnt;
ddr_svc ddr_svc
(
.clk(clk_audio),
.ram_waitrequest(ram2_waitrequest),
.ram_burstcnt(ram2_burstcount),
.ram_addr(ram2_address),
.ram_readdata(ram2_readdata),
.ram_read_ready(ram2_readdatavalid),
.ram_read(ram2_read),
.ram_writedata(ram2_writedata),
.ram_byteenable(ram2_byteenable),
.ram_write(ram2_write),
.ram_bcnt(ram2_bcnt),
.ch0_addr(alsa_address),
.ch0_burst(1),
.ch0_data(alsa_readdata),
.ch0_req(alsa_req),
.ch0_ready(alsa_ready),
.ch1_addr(pal_addr),
.ch1_burst(128),
.ch1_data(pal_data),
.ch1_req(pal_req),
.ch1_ready(pal_wr)
);
wire [27:0] vbuf_address;
wire [7:0] vbuf_burstcount;
wire vbuf_waitrequest;
wire [127:0] vbuf_readdata;
wire vbuf_readdatavalid;
wire vbuf_read;
wire [127:0] vbuf_writedata;
wire [15:0] vbuf_byteenable;
wire vbuf_write;
wire [23:0] hdmi_data;
wire hdmi_vs, hdmi_hs, hdmi_de;
ascal
#(
.RAMBASE(32'h20000000),
.N_DW(128),
.N_AW(28)
)
ascal
(
.reset_na (~reset_req),
.run (1),
.freeze (0),
.i_clk (clk_ihdmi),
.i_ce (ce_hpix),
.i_r (hr_out),
.i_g (hg_out),
.i_b (hb_out),
.i_hs (hhs_fix),
.i_vs (hvs_fix),
.i_fl (f1),
.i_de (hde_emu),
.iauto (1),
.himin (0),
.himax (0),
.vimin (0),
.vimax (0),
.o_clk (clk_hdmi),
.o_ce (1),
.o_r (hdmi_data[23:16]),
.o_g (hdmi_data[15:8]),
.o_b (hdmi_data[7:0]),
.o_hs (hdmi_hs),
.o_vs (hdmi_vs),
.o_de (hdmi_de),
.o_lltune (lltune),
.htotal (WIDTH + HFP + HBP + HS),
.hsstart (WIDTH + HFP),
.hsend (WIDTH + HFP + HS),
.hdisp (WIDTH),
.hmin (hmin),
.hmax (hmax),
.vtotal (HEIGHT + VFP + VBP + VS),
.vsstart (HEIGHT + VFP),
.vsend (HEIGHT + VFP + VS),
.vdisp (HEIGHT),
.vmin (vmin),
.vmax (vmax),
.mode ({~lowlat,FB_EN ? FB_FLT : |scaler_flt,2'b00}),
.poly_clk (clk_sys),
.poly_a (coef_addr),
.poly_dw (coef_data),
.poly_wr (coef_wr),
.pal_clk (clk_pal),
.pal_dw (pal_d),
.pal_a (pal_a),
.pal_wr (pal_wr),
.o_fb_ena (FB_EN),
.o_fb_hsize (FB_WIDTH),
.o_fb_vsize (FB_HEIGHT),
.o_fb_format (FB_FMT),
.o_fb_base (FB_BASE),
.avl_clk (clk_100m),
.avl_waitrequest (vbuf_waitrequest),
.avl_readdata (vbuf_readdata),
.avl_readdatavalid(vbuf_readdatavalid),
.avl_burstcount (vbuf_burstcount),
.avl_writedata (vbuf_writedata),
.avl_address (vbuf_address),
.avl_write (vbuf_write),
.avl_read (vbuf_read),
.avl_byteenable (vbuf_byteenable)
);
reg FB_EN = 0;
reg FB_FLT = 0;
reg [5:0] FB_FMT = 0;
reg [11:0] FB_WIDTH = 0;
reg [11:0] FB_HEIGHT = 0;
reg [11:0] FB_HMIN = 0;
reg [11:0] FB_HMAX = 0;
reg [11:0] FB_VMIN = 0;
reg [11:0] FB_VMAX = 0;
reg [31:0] FB_BASE = 0;
reg [11:0] hmin;
reg [11:0] hmax;
reg [11:0] vmin;
reg [11:0] vmax;
always @(posedge clk_vid) begin
reg [31:0] wcalc;
reg [31:0] hcalc;
reg [2:0] state;
reg [11:0] videow;
reg [11:0] videoh;
state <= state + 1'd1;
case(state)
0: if(FB_EN) begin
hmin <= FB_HMIN;
vmin <= FB_VMIN;
hmax <= FB_HMAX;
vmax <= FB_VMAX;
state<= 0;
end
else if(ARX && ARY) begin
wcalc <= VSET ? (VSET*ARX)/ARY : (HEIGHT*ARX)/ARY;
hcalc <= (WIDTH*ARY)/ARX;
end
else begin
hmin <= 0;
hmax <= WIDTH - 1'd1;
vmin <= 0;
vmax <= HEIGHT - 1'd1;
wcalc<= WIDTH;
hcalc<= HEIGHT;
state<= 0;
end
6: begin
videow <= (!VSET && (wcalc > WIDTH)) ? WIDTH : wcalc[11:0];
videoh <= VSET ? VSET : (hcalc > HEIGHT) ? HEIGHT : hcalc[11:0];
end
7: begin
hmin <= ((WIDTH - videow)>>1);
hmax <= ((WIDTH - videow)>>1) + videow - 1'd1;
vmin <= ((HEIGHT - videoh)>>1);
vmax <= ((HEIGHT - videoh)>>1) + videoh - 1'd1;
end
endcase
end
wire [15:0] lltune;
pll_hdmi_adj pll_hdmi_adj
(
.clk(FPGA_CLK1_50),
.reset_na(~reset_req),
.llena(lowlat),
.lltune({16{hdmi_config_done | cfg_dis}} & lltune),
.locked(led_locked),
.i_waitrequest(adj_waitrequest),
.i_write(adj_write),
.i_address(adj_address),
.i_writedata(adj_data),
.o_waitrequest(cfg_waitrequest),
.o_write(cfg_write),
.o_address(cfg_address),
.o_writedata(cfg_data)
);
wire [63:0] pal_data;
wire [47:0] pal_d = {pal_data[55:32], pal_data[23:0]};
wire [6:0] pal_a = ram2_bcnt[6:0];
wire pal_wr;
reg [28:0] pal_addr;
reg pal_req = 0;
always @(posedge clk_pal) begin
reg old_vs;
pal_addr <= FB_BASE[31:3] - 29'd512;
old_vs <= hdmi_vs;
if(~old_vs & hdmi_vs & ~FB_FMT[2] & FB_FMT[1] & FB_FMT[0] & FB_EN) pal_req <= ~pal_req;
end
///////////////////////// HDMI output /////////////////////////////////
wire hdmi_clk_out;
pll_hdmi pll_hdmi
(
.refclk(FPGA_CLK1_50),
.rst(reset_req),
.reconfig_to_pll(reconfig_to_pll),
.reconfig_from_pll(reconfig_from_pll),
.outclk_0(hdmi_clk_out)
);
//1920x1080@60 PCLK=148.5MHz CEA
reg [11:0] WIDTH = 1920;
reg [11:0] HFP = 88;
reg [11:0] HS = 48;
reg [11:0] HBP = 148;
reg [11:0] HEIGHT = 1080;
reg [11:0] VFP = 4;
reg [11:0] VS = 5;
reg [11:0] VBP = 36;
wire [63:0] reconfig_to_pll;
wire [63:0] reconfig_from_pll;
wire cfg_waitrequest,adj_waitrequest;
wire cfg_write;
wire [5:0] cfg_address;
wire [31:0] cfg_data;
reg adj_write;
reg [5:0] adj_address;
reg [31:0] adj_data;
pll_cfg pll_cfg
(
.mgmt_clk(FPGA_CLK1_50),
.mgmt_reset(reset_req),
.mgmt_waitrequest(cfg_waitrequest),
.mgmt_read(0),
.mgmt_readdata(),
.mgmt_write(cfg_write),
.mgmt_address(cfg_address),
.mgmt_writedata(cfg_data),
.reconfig_to_pll(reconfig_to_pll),
.reconfig_from_pll(reconfig_from_pll)
);
reg cfg_ready = 0;
always @(posedge FPGA_CLK1_50) begin
reg gotd = 0, gotd2 = 0;
reg custd = 0, custd2 = 0;
reg old_wait = 0;
gotd <= cfg_got;
gotd2 <= gotd;
adj_write <= 0;
custd <= cfg_custom_t;
custd2 <= custd;
if(custd2 != custd & ~gotd) begin
adj_address <= cfg_custom_p1;
adj_data <= cfg_custom_p2;
adj_write <= 1;
end
if(~gotd2 & gotd) begin
adj_address <= 2;
adj_data <= 0;
adj_write <= 1;
end
old_wait <= adj_waitrequest;
if(old_wait & ~adj_waitrequest & gotd) cfg_ready <= 1;
end
wire hdmi_config_done;
hdmi_config hdmi_config
(
.iCLK(FPGA_CLK1_50),
.iRST_N(cfg_ready & ~HDMI_TX_INT & ~cfg_dis),
.done(hdmi_config_done),
.I2C_SCL(HDMI_I2C_SCL),
.I2C_SDA(HDMI_I2C_SDA),
.dvi_mode(dvi_mode),
.audio_96k(audio_96k),
.limited(hdmi_limited),
.ypbpr(ypbpr_en & direct_video)
);
wire [23:0] hdmi_data_sl;
wire hdmi_de_sl, hdmi_vs_sl, hdmi_hs_sl;
scanlines #(1) HDMI_scanlines
(
.clk(clk_hdmi),
.scanlines(scanlines),
.din(hdmi_data),
.hs_in(hdmi_hs),
.vs_in(hdmi_vs),
.de_in(hdmi_de),
.dout(hdmi_data_sl),
.hs_out(hdmi_hs_sl),
.vs_out(hdmi_vs_sl),
.de_out(hdmi_de_sl)
);
wire [23:0] hdmi_data_osd;
wire hdmi_de_osd, hdmi_vs_osd, hdmi_hs_osd;
osd hdmi_osd
(
.clk_sys(clk_sys),
.io_osd(io_osd_hdmi),
.io_strobe(io_strobe),
.io_din(io_din),
.clk_video(clk_hdmi),
.din(hdmi_data_sl),
.hs_in(hdmi_hs_sl),
.vs_in(hdmi_vs_sl),
.de_in(hdmi_de_sl),
.dout(hdmi_data_osd),
.hs_out(hdmi_hs_osd),
.vs_out(hdmi_vs_osd),
.de_out(hdmi_de_osd)
`ifndef ARCADE_SYS
,
.osd_status(osd_status)
`endif
);
wire hdmi_cs_osd;
csync csync_hdmi(clk_hdmi, hdmi_hs_osd, hdmi_vs_osd, hdmi_cs_osd);
reg [23:0] dv_data;
reg dv_hs, dv_vs, dv_de;
always @(posedge clk_vid) begin
reg [23:0] dv_d1, dv_d2;
reg dv_de1, dv_de2, dv_hs1, dv_hs2, dv_vs1, dv_vs2;
reg [12:0] vsz, vcnt;
reg old_hs, old_vs;
reg vde;
reg [3:0] hss;
if(ce_pix) begin
hss <= (hss << 1) | vga_hs_osd;
old_hs <= vga_hs_osd;
if(~old_hs && vga_hs_osd) begin
old_vs <= vga_vs_osd;
if(~&vcnt) vcnt <= vcnt + 1'd1;
if(~old_vs & vga_vs_osd & ~f1) vsz <= vcnt;
if(old_vs & ~vga_vs_osd) vcnt <= 0;
if(vcnt == 1) vde <= 1;
if(vcnt == vsz - 3) vde <= 0;
end
dv_de1 <= !{hss,vga_hs_osd} && vde;
dv_hs1 <= csync_en ? vga_cs_osd : vga_hs_osd;
dv_vs1 <= vga_vs_osd;
end
dv_d1 <= vga_data_osd;
dv_d2 <= dv_d1;
dv_de2 <= dv_de1;
dv_hs2 <= dv_hs1;
dv_vs2 <= dv_vs1;
dv_data<= dv_d2;
dv_de <= dv_de2;
dv_hs <= dv_hs2;
dv_vs <= dv_vs2;
end
wire hdmi_tx_clk;
cyclonev_clkselect hdmi_clk_sw
(
.clkselect({1'b1, ~vga_fb & direct_video}),
.inclk({clk_vid, hdmi_clk_out, 2'b00}),
.outclk(hdmi_tx_clk)
);
altddio_out
#(
.extend_oe_disable("OFF"),
.intended_device_family("Cyclone V"),
.invert_output("OFF"),
.lpm_hint("UNUSED"),
.lpm_type("altddio_out"),
.oe_reg("UNREGISTERED"),
.power_up_high("OFF"),
.width(1)
)
hdmiclk_ddr
(
.datain_h(1'b0),
.datain_l(1'b1),
.outclock(hdmi_tx_clk),
.dataout(HDMI_TX_CLK),
.aclr(1'b0),
.aset(1'b0),
.oe(1'b1),
.outclocken(1'b1),
.sclr(1'b0),
.sset(1'b0)
);
reg hdmi_out_hs;
reg hdmi_out_vs;
reg hdmi_out_de;
reg [23:0] hdmi_out_d;
always @(posedge hdmi_tx_clk) begin
reg hs,vs,de;
reg [23:0] d;
hs <= (~vga_fb & direct_video) ? dv_hs : (direct_video & csync_en) ? hdmi_cs_osd : hdmi_hs_osd;
vs <= (~vga_fb & direct_video) ? dv_vs : hdmi_vs_osd;
de <= (~vga_fb & direct_video) ? dv_de : hdmi_de_osd;
d <= (~vga_fb & direct_video) ? dv_data : hdmi_data_osd;
hdmi_out_hs <= hs;
hdmi_out_vs <= vs;
hdmi_out_de <= de;
hdmi_out_d <= d;
end
assign HDMI_TX_HS = hdmi_out_hs;
assign HDMI_TX_VS = hdmi_out_vs;
assign HDMI_TX_DE = hdmi_out_de;
assign HDMI_TX_D = hdmi_out_d;
///////////////////////// VGA output //////////////////////////////////
wire [23:0] vga_data_sl;
wire vga_de_sl, vga_vs_sl, vga_hs_sl;
scanlines #(0) VGA_scanlines
(
.clk(clk_vid),
.scanlines(scanlines),
.din(de_emu ? {r_out, g_out, b_out} : 24'd0),
.hs_in(hs_fix),
.vs_in(vs_fix),
.de_in(de_emu),
.dout(vga_data_sl),
.hs_out(vga_hs_sl),
.vs_out(vga_vs_sl),
.de_out(vga_de_sl)
);
wire [23:0] vga_data_osd;
wire vga_vs_osd, vga_hs_osd;
osd vga_osd
(
.clk_sys(clk_sys),
.io_osd(io_osd_vga),
.io_strobe(io_strobe),
.io_din(io_din),
.clk_video(clk_vid),
.din(vga_data_sl),
.hs_in(vga_hs_sl),
.vs_in(vga_vs_sl),
.de_in(vga_de_sl),
.dout(vga_data_osd),
.hs_out(vga_hs_osd),
.vs_out(vga_vs_osd)
);
wire vga_cs_osd;
csync csync_vga(clk_vid, vga_hs_osd, vga_vs_osd, vga_cs_osd);
`ifndef DUAL_SDRAM
wire [23:0] vga_o;
vga_out vga_out
(
.ypbpr_full(0),
.ypbpr_en(ypbpr_en),
.dout(vga_o),
.din((vga_fb | vga_scaler) ? {24{hdmi_de_osd}} & hdmi_data_osd : vga_data_osd)
);
wire vs1 = (vga_fb | vga_scaler) ? hdmi_vs_osd : vga_vs_osd;
wire hs1 = (vga_fb | vga_scaler) ? hdmi_hs_osd : vga_hs_osd;
wire cs1 = (vga_fb | vga_scaler) ? hdmi_cs_osd : vga_cs_osd;
assign VGA_VS = (VGA_EN | SW[3]) ? 1'bZ : csync_en ? 1'b1 : ~vs1;
assign VGA_HS = (VGA_EN | SW[3]) ? 1'bZ : csync_en ? ~cs1 : ~hs1;
assign VGA_R = (VGA_EN | SW[3]) ? 6'bZZZZZZ : vga_o[23:18];
assign VGA_G = (VGA_EN | SW[3]) ? 6'bZZZZZZ : vga_o[15:10];
assign VGA_B = (VGA_EN | SW[3]) ? 6'bZZZZZZ : vga_o[7:2];
`endif
///////////////////////// Audio output ////////////////////////////////
assign SDCD_SPDIF =(SW[3] & ~spdif) ? 1'b0 : 1'bZ;
`ifndef DUAL_SDRAM
wire anl,anr;
assign AUDIO_SPDIF = SW[3] ? 1'bZ : SW[0] ? HDMI_LRCLK : spdif;
assign AUDIO_R = SW[3] ? 1'bZ : SW[0] ? HDMI_I2S : anr;
assign AUDIO_L = SW[3] ? 1'bZ : SW[0] ? HDMI_SCLK : anl;
`endif
assign HDMI_MCLK = 0;
wire [15:0] audio_l, audio_l_pre;
aud_mix_top audmix_l
(
.clk(clk_audio),
.att(vol_att),
.mix(audio_mix),
.is_signed(audio_s),
.core_audio(audio_ls),
.pre_in(audio_r_pre),
.linux_audio(alsa_l),
.pre_out(audio_l_pre),
.out(audio_l)
);
wire [15:0] audio_r, audio_r_pre;
aud_mix_top audmix_r
(
.clk(clk_audio),
.att(vol_att),
.mix(audio_mix),
.is_signed(audio_s),
.core_audio(audio_rs),
.pre_in(audio_l_pre),
.linux_audio(alsa_r),
.pre_out(audio_r_pre),
.out(audio_r)
);
wire spdif;
audio_out audio_out
(
.reset(reset),
.clk(clk_audio),
.sample_rate(audio_96k),
.left_in(audio_l),
.right_in(audio_r),
.i2s_bclk(HDMI_SCLK),
.i2s_lrclk(HDMI_LRCLK),
.i2s_data(HDMI_I2S),
`ifndef DUAL_SDRAM
.dac_l(anl),
.dac_r(anr),
`endif
.spdif(spdif)
);
wire [28:0] alsa_address;
wire [63:0] alsa_readdata;
wire alsa_ready;
wire alsa_req;
wire alsa_late;
wire [15:0] alsa_l, alsa_r;
alsa alsa
(
.reset(reset),
.clk(clk_audio),
.ram_address(alsa_address),
.ram_data(alsa_readdata),
.ram_req(alsa_req),
.ram_ready(alsa_ready),
.spi_ss(aspi_ss),
.spi_sck(aspi_sck),
.spi_mosi(aspi_mosi),
.spi_miso(aspi_miso),
.pcm_l(alsa_l),
.pcm_r(alsa_r)
);
//////////////// User I/O (USB 3.0 connector) /////////////////////////
assign USER_IO[0] = !user_out[0] ? 1'b0 : 1'bZ;
assign USER_IO[1] = !user_out[1] ? 1'b0 : 1'bZ;
assign USER_IO[2] = !(SW[1] ? HDMI_I2S : user_out[2]) ? 1'b0 : 1'bZ;
assign USER_IO[3] = !user_out[3] ? 1'b0 : 1'bZ;
assign USER_IO[4] = !(SW[1] ? HDMI_SCLK : user_out[4]) ? 1'b0 : 1'bZ;
assign USER_IO[5] = !(SW[1] ? HDMI_LRCLK : user_out[5]) ? 1'b0 : 1'bZ;
assign USER_IO[6] = !user_out[6] ? 1'b0 : 1'bZ;
assign user_in[0] = USER_IO[0];
assign user_in[1] = USER_IO[1];
assign user_in[2] = SW[1] | USER_IO[2];
assign user_in[3] = USER_IO[3];
assign user_in[4] = SW[1] | USER_IO[4];
assign user_in[5] = SW[1] | USER_IO[5];
assign user_in[6] = USER_IO[6];
/////////////////// User module connection ////////////////////////////
wire clk_sys;
wire [15:0] audio_ls, audio_rs;
wire audio_s;
wire [1:0] audio_mix;
wire [1:0] scanlines;
wire [7:0] r_out, g_out, b_out, hr_out, hg_out, hb_out;
wire vs_fix, hs_fix, de_emu, vs_emu, hs_emu, f1;
wire hvs_fix, hhs_fix, hde_emu;
wire clk_vid, ce_pix, clk_ihdmi, ce_hpix;
`ifdef USE_DDRAM
wire ram_clk;
wire [28:0] ram_address;
wire [7:0] ram_burstcount;
wire ram_waitrequest;
wire [63:0] ram_readdata;
wire ram_readdatavalid;
wire ram_read;
wire [63:0] ram_writedata;
wire [7:0] ram_byteenable;
wire ram_write;
`endif
wire led_user;
wire [1:0] led_power;
wire [1:0] led_disk;
wire [1:0] btn;
sync_fix sync_v(clk_vid, vs_emu, vs_fix);
sync_fix sync_h(clk_vid, hs_emu, hs_fix);
wire [6:0] user_out, user_in;
`ifndef USE_SDRAM
assign {SDRAM_DQ, SDRAM_A, SDRAM_BA, SDRAM_CLK, SDRAM_CKE, SDRAM_DQML, SDRAM_DQMH, SDRAM_nWE, SDRAM_nCAS, SDRAM_nRAS, SDRAM_nCS} = {39'bZ};
`endif
`ifdef ARCADE_SYS
wire hvs_emu, hhs_emu;
sync_fix hdmi_sync_v(clk_ihdmi, hvs_emu, hvs_fix);
sync_fix hdmi_sync_h(clk_ihdmi, hhs_emu, hhs_fix);
assign audio_mix = 0;
assign {ADC_SCK, ADC_SDI, ADC_CONVST} = 0;
assign btn = 0;
`else
assign clk_ihdmi= clk_vid;
assign ce_hpix = ce_pix;
assign hr_out = r_out;
assign hg_out = g_out;
assign hb_out = b_out;
assign hhs_fix = hs_fix;
assign hvs_fix = vs_fix;
assign hde_emu = de_emu;
wire uart_dtr;
wire uart_dsr;
wire uart_cts;
wire uart_rts;
wire uart_rxd;
wire uart_txd;
wire osd_status;
`endif
emu emu
(
.CLK_50M(FPGA_CLK2_50),
.RESET(reset),
.HPS_BUS({f1, HDMI_TX_VS, clk_100m, clk_ihdmi, ce_hpix, hde_emu, hhs_fix, hvs_fix, io_wait, clk_sys, io_fpga, io_uio, io_strobe, io_wide, io_din, io_dout}),
.VGA_R(r_out),
.VGA_G(g_out),
.VGA_B(b_out),
.VGA_HS(hs_emu),
.VGA_VS(vs_emu),
.VGA_DE(de_emu),
.VGA_F1(f1),
`ifdef ARCADE_SYS
.VGA_CLK(clk_vid),
.VGA_CE(ce_pix),
.HDMI_CLK(clk_ihdmi),
.HDMI_CE(ce_hpix),
.HDMI_R(hr_out),
.HDMI_G(hg_out),
.HDMI_B(hb_out),
.HDMI_HS(hhs_emu),
.HDMI_VS(hvs_emu),
.HDMI_DE(hde_emu),
.HDMI_SL(scanlines),
.HDMI_ARX(ARX),
.HDMI_ARY(ARY),
`else
.CLK_VIDEO(clk_vid),
.CE_PIXEL(ce_pix),
.VGA_SL(scanlines),
.VIDEO_ARX(ARX),
.VIDEO_ARY(ARY),
.AUDIO_MIX(audio_mix),
.ADC_BUS({ADC_SCK,ADC_SDO,ADC_SDI,ADC_CONVST}),
`endif
.LED_USER(led_user),
.LED_POWER(led_power),
.LED_DISK(led_disk),
.AUDIO_L(audio_ls),
.AUDIO_R(audio_rs),
.AUDIO_S(audio_s),
`ifdef USE_DDRAM
.DDRAM_CLK(ram_clk),
.DDRAM_ADDR(ram_address),
.DDRAM_BURSTCNT(ram_burstcount),
.DDRAM_BUSY(ram_waitrequest),
.DDRAM_DOUT(ram_readdata),
.DDRAM_DOUT_READY(ram_readdatavalid),
.DDRAM_RD(ram_read),
.DDRAM_DIN(ram_writedata),
.DDRAM_BE(ram_byteenable),
.DDRAM_WE(ram_write),
`endif
`ifdef USE_SDRAM
.SDRAM_DQ(SDRAM_DQ),
.SDRAM_A(SDRAM_A),
.SDRAM_DQML(SDRAM_DQML),
.SDRAM_DQMH(SDRAM_DQMH),
.SDRAM_BA(SDRAM_BA),
.SDRAM_nCS(SDRAM_nCS),
.SDRAM_nWE(SDRAM_nWE),
.SDRAM_nRAS(SDRAM_nRAS),
.SDRAM_nCAS(SDRAM_nCAS),
.SDRAM_CLK(SDRAM_CLK),
.SDRAM_CKE(SDRAM_CKE),
`endif
`ifdef DUAL_SDRAM
.SDRAM2_DQ(SDRAM2_DQ),
.SDRAM2_A(SDRAM2_A),
.SDRAM2_BA(SDRAM2_BA),
.SDRAM2_nCS(SDRAM2_nCS),
.SDRAM2_nWE(SDRAM2_nWE),
.SDRAM2_nRAS(SDRAM2_nRAS),
.SDRAM2_nCAS(SDRAM2_nCAS),
.SDRAM2_CLK(SDRAM2_CLK),
.SDRAM2_EN(SW[3]),
`endif
`ifndef ARCADE_SYS
.BUTTONS(btn),
.OSD_STATUS(osd_status),
.SD_SCK(SD_CLK),
.SD_MOSI(SD_MOSI),
.SD_MISO(SD_MISO),
.SD_CS(SD_CS),
`ifdef DUAL_SDRAM
.SD_CD(mcp_sdcd),
`else
.SD_CD(mcp_sdcd & (SW[0] ? VGA_HS : (SW[3] | SDCD_SPDIF))),
`endif
.UART_CTS(uart_rts),
.UART_RTS(uart_cts),
.UART_RXD(uart_txd),
.UART_TXD(uart_rxd),
.UART_DTR(uart_dsr),
.UART_DSR(uart_dtr),
`endif
.USER_OUT(user_out),
.USER_IN(user_in)
);
endmodule
/////////////////////////////////////////////////////////////////////
module sync_fix
(
input clk,
input sync_in,
output sync_out
);
assign sync_out = sync_in ^ pol;
reg pol;
always @(posedge clk) begin
integer pos = 0, neg = 0, cnt = 0;
reg s1,s2;
s1 <= sync_in;
s2 <= s1;
if(~s2 & s1) neg <= cnt;
if(s2 & ~s1) pos <= cnt;
cnt <= cnt + 1;
if(s2 != s1) cnt <= 0;
pol <= pos > neg;
end
endmodule
/////////////////////////////////////////////////////////////////////
module aud_mix_top
(
input clk,
input [4:0] att,
input [1:0] mix,
input is_signed,
input [15:0] core_audio,
input [15:0] linux_audio,
input [15:0] pre_in,
output reg [15:0] pre_out,
output reg [15:0] out
);
reg [15:0] ca;
always @(posedge clk) begin
reg [15:0] d1,d2,d3;
d1 <= core_audio; d2<=d1; d3<=d2;
if(d2 == d3) ca <= d2;
end
always @(posedge clk) begin
reg signed [16:0] a1, a2, a3, a4;
a1 <= is_signed ? {ca[15],ca} : {2'b00,ca[15:1]};
a2 <= a1 + {linux_audio[15],linux_audio};
pre_out <= a2[16:1];
case(mix)
0: a3 <= a2;
1: a3 <= $signed(a2) - $signed(a2[16:3]) + $signed(pre_in[15:2]);
2: a3 <= $signed(a2) - $signed(a2[16:2]) + $signed(pre_in[15:1]);
3: a3 <= {a2[16],a2[16:1]} + {pre_in[15],pre_in};
endcase
if(att[4]) a4 <= 0;
else a4 <= a3 >>> att[3:0];
//clamping
out <= ^a4[16:15] ? {a4[16],{15{a4[15]}}} : a4[15:0];
end
endmodule
/////////////////////////////////////////////////////////////////////
// CSync generation
// Shifts HSync left by 1 HSync period during VSync
module csync
(
input clk,
input hsync,
input vsync,
output csync
);
assign csync = (csync_vs ^ csync_hs);
reg csync_hs, csync_vs;
always @(posedge clk) begin
reg prev_hs;
reg [15:0] h_cnt, line_len, hs_len;
// Count line/Hsync length
h_cnt <= h_cnt + 1'd1;
prev_hs <= hsync;
if (prev_hs ^ hsync) begin
h_cnt <= 0;
if (hsync) begin
line_len <= h_cnt - hs_len;
csync_hs <= 0;
end
else hs_len <= h_cnt;
end
if (~vsync) csync_hs <= hsync;
else if(h_cnt == line_len) csync_hs <= 1;
csync_vs <= vsync;
end
endmodule
Reference in New Issue View Git Blame Copy Permalink