* Making saving and loading config files work with protobuf
* Formatted the Status column, and fixed the available ID logic
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Better handling of device status
* Updated parameter handling
* Updated setting default interfaces
* Revert "Updated setting default interfaces"
This reverts commit 210abc775d.
* Revert "Updated parameter handling"
This reverts commit 35302addd5.
* Abort with a 404 if rascsi is not running. Use any protobuf response to determine whether rascsi is running (should hardly be required anymore due to the other change, but just in case).
* Move id reservation back into __main__
* Remove check for device type when validating Removed image
* Leverage device property data for better status messages
* Remove redundant string sanitation when reading config csv file
* Clean up device list generation
* Cleanup
* Remove duplicates before building valid scsi id list
* Fully translated cfilesystem.h code comments to English; partially translated cfilesystem.cpp
* rascsi supports reserving IDs
* Updated help message
* Replaced BOOL by bool
* Logging update
* Logging update
* Cleanup
* Restructure the easyinstall.sh script to combine the install/update flows, and disallow installing the webapp by itself
* Remove redundant steps handled in Makefile
* Add the functionality to specify connect_type through a parameter
* Add validation to the argument parser allowing only STANDARD and FULLSPEC as options
* Complete translation of code comments for cfilesystem.h; partial translation for cfilesystem.cpp
* Cleanup
* Merge parts of the Network Assistant script by sonique6784; fix the run_choice startup parameter
* Improve on the network setup messages
* Fix routing address
* Add checks for previous configuration; cleanup
* Cleanup
* Remove redundant step in wired setup. Improve messages.
* Cleanup
* Added default parameters to device properties
* Return parameters a device was set up with
* Add flows for configuring custom network settings; adopting some logic by sonique6784
* Improved device initialization
* Updated default parameter handling
* Updated default parameter handling
* Fixed typo
* Comment updates
* Comment update
* Make iso generation work again, and add error handling to urllib actions
* Manage default parameters in the respective device
* Print available network interfaces. Clean up step and improve descriptive messages.
* Make the script clean up previous configurations
* Make the script only show relevant interfaces
* Partial translation of cfilesystem.cpp
* Do not pass empty parameter string
* Added supports_params flag
* Completely translate code comments in cfilesystem.cpp
* Show rascsi-web status after installing
* Refactoring
* Made comparisons more consistent
* Updated error handling
* Updated exception handling
* Made comparisons more consistent
* Updated error handling
* Overlooked code comment translation
* Renaming
* Better error handling for socket connection
* Disable two NEC hd image types due to issue#232
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Better handling of removable disks in the web ui
* Added stoppable property and stopped status
* Made MO stoppable
* Removed duplicate code
* Removed duplicate code
* Copy read-only property
* Renaming
* Add an assistant for reserving scsi ids
* Don't show action if no device attached
* Implement a device_info app path, and cut down on device columns always shown
* Cleanup
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Made disk_t private
* Made some data structures private
* Fixed ARM compile issue
* Fast forward instead of rebase existing git repo
* Fixed ctapdriver initialization issue
* Reset read-only status when opening an image file
* Cleanup
* Cleanup
* Made logging more consistent
* Updated log level
* Cleanup
* Log load/eject on error level for testing
* Revert "Log load/eject on error level for testing"
This reverts commit d35a15ea8e.
* Assume drive is not ready after having been stopped
* Updated status handling
* Make the csv config files store all relevant device data for reading
* Read 9 column csv config files
* Fixed typo
* Rebuild manpage
* Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header)
* Removed unused code
* Enum data type update
* Removed duplicate range check
* Removed duplicate code
* Removed more duplicate code
* Logging update
* SCCD sector size was not meant to be configurable
* Better error handling for csv reading and writing
* Updated configurable sector size properties
* Removed assertion
* Improved error handling
* Updated error handling
* Re-added special error handling only relevant for SASI
* Added TODOs
* Comment update
* Added override modifier
* Removed obsolete debug flag (related code was not called)
* Comment and logging updates
* Removed obsolete try/catch
* Revert "Removed obsolete try/catch"
This reverts commit 39ca12d8b1.
* Comment update
* Removed duplicate code
* Updated error messages, use more foreach loops
* Avoid storing RaSCSI generated product info in config file
* Updated logging
* Logging update
* Save config files in json instead of csv
* Fix bugs with json config loading
* Refactoring & remove unused code
* Refactoring
* Display upper case file endings in file management list
* Only show product vendor for non-RaSCSI devices in the device list
* Translate code comment
* Refactoring
* Fix bad identation
* Improve valid file extension handling
* Add validation when attaching removable media
* Display valid file endings under the file list
* Cleanup
* Don't store 0 block size
* Fix indentation
* Read and write config files in key:pair format
* Add section for controlling logging
* README update
* Added block_count
* Cleanup, fix typos
* Support attaching CD-ROM with custom block size
* Evaluate block size when inserting a media
* rasctl display capacity if available
* Info message update
* Use kwargs for device attachment
* Fix bugs in attach_image kwargs; make config file more readable
* POC for attaching device with profile
* Only list product types valid for the particular image file
* Perform validation of HDD image size based on the product profile
* Implement sidecar config files for drive images.
* Added missing product name to NEC vital product data
* MO block size depends on capacity only
* Better error handling for device sidecar config loading
* Extended property/status display
* Property display update
* Updated error handling
* Handle image sizes in bytes internally
* Revert change
* Resolve bad merge
Co-authored-by: Uwe Seimet <Uwe.Seimet@seimet.de>
* Use foreach
* Renaming
* Revert "Renaming"
This reverts commit b0554b9c0a.
* Manpage updates
* Removed obsolete assertions
* Replaced QWORD by uint64_t and removed respective typedef
* Removed LPCSTR typedef
* Removed LPCTSTR typedef
* Removed LPTSTR typedef
* Renamed SCSI command interface classes
* Renamed xm6.h to rascsi.h
* Moved interface classes to new interfaces subfolder
* Added include
* Fixed compilation issues of 64 bit Ubuntu
* Renaming
* Sort block sizes
* protobuf interface description update
* Fixed handling for sector size for non-disk devices
* Fixed typo
* Fixed comment
* Translate code commends into English, removing redundant ones (#214)
* Comment update
* For other bridge interfaces than eth0 IP address and netmask can be provided
* Added special rule for testing on x86 PCs
* Translated code comments into English, removing some redundant ones in the process, plus fixing typos (#215)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* Comment update
* Removed unused typedefs
* Added special rule for testing on x86 PCs
* Comment update
* Comment update
* Updated capacity calculation
* Updated protobuf interface to signal parameter support
* Simplified protobuf interface
* Updated rasctl server info output
* Updated logging
* protobuf interface has to return block only if it is configurable
* Updated block size handling
* Improved error message if ID is already in use
* Removed typedef
* Renamed protobuf interface method
* Renaming
* Use protobuf::Messsge instead of protobuf::MessageLite
* default_image_folder cannot be an empty string, removed obsolete check
* Logging update
* Made some error messages more concise
* Removed magic constant
* Updated error message
* Comment update
* Names of removable media drives must be constant and not contain the capacity
* Improved DeviceFactory error handling
* More error handing improvements
* Interface comment update
* Pass interface list to ctapdriver when creating bridge
* Moved initialization code
* Updated rasctl server information output
* Improved handling of MO capacities
* Renaming
* Comment update
* Reject inserting a medium when there is already a medium present (eject first)
* Save list of files in use before dry-run
* Updated rasctl server info message
* Comment update
* Fixed typo
* Cleaned list handling
* Sort devices list by ID *and unit*
* Improved block size check
* Fixed issue with missing method in old Raspberry Pi OS protobuf implementation
* Updated error message
* Improve and fix bugs with saving&loading configuration files for rascsi-web (#218)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Removed unused structures, code and type cleanup
* Use unscoped enums for commands
* SASI Format opcode is 0x06, not 0x04 (see comment in code)
* Removed duplicate command
* Code review, data type updates
* Data type updated, use #pragma once
* Logging update
* Renaming
* Renaming
* Removed duplicate code
* Renaming
* Refactoring
* Removed TODO
* Updated logging
* Comment update
* Comment update
* Updated GetEventStatusNotification
* Removed goto
* Options -h and -v do not require to be the root user (fixes issue #166)
* Updated error messages and exception handling
* Added number of supported LUNs to protobuf interface
* Updated list handling of protobuf interface
* Comment update
* Improved error handling
* Added missing return statement
* Allow empty device list
* Fixed unnecessary detach_all() when config file isn't read (#221)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Protecting/unprotecing a non-ready medium is considered not possible
* Updated error message
* Extract detaching all devices, add parameter list support
* Comment update
* Fixed typos
* Restore files in use if dry-run fails
* Feature configurable reserved id for rascsi-web (#223)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make the reserved SCSI id configurable through an argument to start.sh; make the rascsi-web service reserve 7 by default to maintain current behavior.
* Make it possible to reserve multiple scsi ids in the web ui
* Added support for reserved IDs
* rasctl output update
* Re-ordered logging
* Logging update
* Make use of the newly introduced 'rasctl -r' to have the webui reserve ids on the backend side upon startup (#224)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well.
* Updated string to integer conversions
* Improved string to integer conversion
* Move string to integer conversion to rasutil
* Removed unused variable
* Fixed detach, which did not remove the filename from the filenames set
* Re-added folder to gitignore
* Set/Display patch version
* Fix issue where reserved ids were not reserved again when restarting rascsi-service from within the web ui (#226)
* Translate code commends into English, removing redundant ones
* - Translated all remaining Japanese code comments in src/raspberrypi/ to English, with the exception of cfilesystem.cpp|h
- Removed some redundant comments where the context is obvious from the
code
- Fixed a few typos and mistakes
* - Store only file path and name to configuration csv
- Strip known non-file path strings when reading configuration csv (backwards compatibility)
- Validate SCSI ID before attempting to attach a device
* Add comment and TODO
* Partial translation of cfilesystem.h
* Move csv read/write logic into file_cmd.py
* Load default.csv on rascsi-web startup
* Add rudimentary error handling to config loading/saving
* Implement a delete configuration csv file feature. Also rename the delete_image method to delete_file and made it take the full file patch as argument to be consistent with other file operation methods.
* Catch the exception when attempting to exclude SCSI id that is already in use from a list of valid SCSI ids
* Fix error handling when failing to open a csv file for read or write
* Run detach_all() only after succeeding to open a file for reading
* Make use of the new 'rasctl -r' command to reserve IDs on the backend side as well.
* Make sure reserved SCSI IDs gets reserved again when restarting rascsi-service from within the web ui
* Updated interface comment
* Accept daynaport as legacy type
* Fixed typo
* Remove file from the list of files in use when ejected with a SCSI command
* Check for attached device for INSERT, EJECT, PROTECT, UNPROTECT
* Fixed error handling
* Fixed filepath handling
* Added more device shortcuts to rasctl
* Fixed function declaration
* Extraced ATTACH and DETACH
* Extracted INSERT
* Simplified ProcessCmd
* Comment update
* Fixed memory leak
* Log information on whether a new device is protected or read-only
* Updated errro message
* Updated error message
* Initialize private fields
* Updated rasctl help message
* Added DEVICE_INFO to protobuf interface
* Improved error handling
* DEVICE_INFO supports device list
* Updated server info handling
* Unified result handling with oneof, all commands now return PbResult
* A result can always return a message string
* Fixed typo
* Simplified sending of commands
* Improved error handling
* Removed unused code
* Updated error handling
* Code cleanup
* Comment update
* Updated logging
* Updated error handling
* Updated handling of removed status for devices without image file support
* Comment update
* Fixed typo
* Updated logging
* Updated parameter handling
* Updated setting default interfaces
* Revert "Updated setting default interfaces"
This reverts commit 210abc775d.
* Revert "Updated parameter handling"
This reverts commit 35302addd5.
* rascsi supports reserving IDs
* Updated help message
* Replaced BOOL by bool
* Logging update
* Logging update
* Added default parameters to device properties
* Return parameters a device was set up with
* Improved device initialization
* Updated default parameter handling
* Updated default parameter handling
* Fixed typo
* Comment updates
* Comment update
* Manage default parameters in the respective device
* Do not pass empty parameter string
* Added supports_params flag
* Made comparisons more consistent
* Updated error handling
* Updated exception handling
* Renaming
* Comment update
* NEC sectors size must be 512 bytes
* Updated logging
* Updated vendor name handling
* Updated handling of media loading/unloading
* Added stoppable property and stopped status
* Made MO stoppable
* Removed duplicate code
* Removed duplicate code
* Copy read-only property
* Renaming
* Removed duplicate code, added START/STOP
* Improved default parameter handling
* Updated load/eject handling
* Logging update
* Fixed typo
* Verified START/STOP UNIT
* Updated logging
* Updated status handling
* Updated status handling
* More status handling updates
* Logging update
* Made instance fields local variables
* Made disk_t private
* Made some data structures private
* Fixed ARM compile issue
* Fixed ctapdriver initialization issue
* Reset read-only status when opening an image file
* Made logging more consistent
* Updated log level
* Log load/eject on error level for testing
* Revert "Log load/eject on error level for testing"
This reverts commit d35a15ea8e.
* Assume drive is not ready after having been stopped
* Updated status handling
* Fixed typo
* Rebuild manpage
* Fixed issue #234 (MODE SENSE (10) returns wrong mode parameter header)
* Removed unused code
* Enum data type update
* Removed duplicate range check
* Removed duplicate code
* Removed more duplicate code
* Logging update
* SCCD sector size was not meant to be configurable
* Updated configurable sector size properties
* Removed assertion
* Improved error handling
* Updated error handling
* Re-added special error handling only relevant for SASI
* Added TODOs
* Comment update
* Added override modifier
* Removed obsolete debug flag (related code was not called)
* Comment and logging updates
* Removed obsolete try/catch
* Revert "Removed obsolete try/catch"
This reverts commit 39ca12d8b1.
* Comment update
* Removed duplicate code
* Updated error messages, use more foreach loops
* Updated logging
* Logging update
* README update
* Added block_count
* Evaluate block size when inserting a media
* rasctl display capacity if available
* Info message update
* Added missing product name to NEC vital product data
* MO block size depends on capacity only
* Extended property/status display
* Property display update
* Updated error handling
* (Doc only changes) Fix typos and add clarification that SASI is used on Unix workstations
Co-authored-by: Daniel Markstedt <markstedt@gmail.com>
Co-authored-by: Tony Kuker <akuker@gmail.com>
* make the app look a little less derpy on phone sized devices
* add "Add to home screen" support
Note: if you would like to replace my rather derpy rendition of the SCSI icon
(and I wouldn't blame you if you did) then run your icon through the online
favicon processor at https://www.favicon-generator.org/ to get all of the PWA
icons (apple-icon-114x114.png, etc.)
* Device type unification, support of removable media
* Added support for .hdr extension
* Removable flag cleanup
* Manpage update
* Enriched PbOperation with PbDevice
* Added file size to PbImageFile
* Added device list support
* Set image_file
* Make remote interface more robust by ignoring SIGPIPE
* Return status only once
* Fixed typo
* Error handling update
* When starting rascsi parse everything before attaching devices
* Added dry run mode
* Comment update
* Updated logging
* Added Device base class, Disk class inherits from it
* Renaming
* Use vectors for controllers and disks, as preparation for using maps
* Updated file support handling
* Comment update
* DaynaPort and Bridge inherit from Device instead of Disk
* ProcessCmd() now works with devices instead of disks
* Renaming
* Added DeviceFactory
* Improved factory
* Comment update
* protected disk_t
* Code cleanup, added translations
* Device name can be set for rascsi
* rasctl can set device name
* Manpage update
* Manpage update
* Formatting update
* Check for missing name
* Initialize fd
* Initialize type
* Fixed string length issue
* Updated capacity formatting
* Fixed typo
* Split PbDevice into device and device definition
* Added TODO
* Renaming
* Renaming
* Device types can be explicitly specified with -t (no FILE:TYPE syntax anymore)
* Fixed compile-time issue
* Removed unused Append mode, updated read-only handling
* Type handling and manpage update
* Cleanup
* rasctl parser cleanup
* Review
* Constructor update
* Added .hdr (SCRM) support to web interface, tested web interface
* Default folder can be set remotely
* Removed deprecated operation
* DETACH supports all parameters in order to detach all devices
* include cleanup
* Logging should not depend on NDEBUG, for RaSCSI it is not peformance-critical
* INFO is default log level
* Exception renaming
* Updated GetPaddedName()
* Inheritance update
* Added BlockDevice class
* Removed unused code
* Updated typedefs
* Revert "Updated typedefs"
This reverts commit 546b46215a.
* Removed unused code
* Fixed warnign
* Use standard C++ integer types, use streams to resolve printf data type issues
* Added TODOs
* Added TODO
* Renaming
* Added TODO
* Added TODO
* Improved dry-run
* Code cleanup
* Updated handling of unknown options, code review and cleanup
* Manpage update
* Added PrimaryDevice
* Include cleanup
* Added pure virtual methods
* Comment updates
* Split rasutil
* Replaced some occurrences of BOOL
* Removed obsolete RASCSI definition in xm6.h
* Removed unused code, updated TODOs, replaced BOOL
* Added capacity check (issue #192)
* Fixed (most likely) https://github.com/akuker/RASCSI/issues/191
* Fixed wrong error messages
* For root the default image folder is /home/pi/images, updated error handling
* Dynaport code review
* Improved error handling
* Implemented READ CAPACITY(16)
* Comment update
* Commands can be 16 bytes long
* Implemented READ/WRITE/VERIFY(16)
* Comment update
* Renamed method to reflect the name of the respective SCSI command
* Do not created devices during dryRun
* Fixed padding of SCSIHD_APPLE vendor and product
* Initial implementation
* Updated ReportLuns
* Byte count update
* Fixed typo
* Finalized REPORT LUNS
* Removed TODO
* Updated TODO
* TODO update
* Updated device factory
* Comment update
* 64 bit update, tested on Ubuntu 64 bit system
* Removed assertion
* SCSI hard disks always have Apple specific mode pages (resolves issue #193)
* Error messsage update, 64 bit cleanup
* Reduced streams usage
* Updated handling of device flags
* MOs are protectable
* Removed duplicate error code handling
* Removed duplicate code
* Fixed CmdReadToc buffer overflow (https://github.com/akuker/RASCSI/issues/194)
* Added naive implementation of GET EVENT STATUS NOTIFICATION to avoid wranings
* HD must set removable device bit if the media is removable
* Removed duplicate logging
* Updated daynaport additional length
* Removed broken daynaport REQUEST SENSE. Successfully tested with my Mac.
* EnableInterface should not always return TRUE
* Updated Inquiry
* Updated LUN handling
* Replaced incorrect free by delete
* Updated comments and write-protection handling
* Made default HD name consistent
* STATUS_NOERROR is default
* Fixed Eject
* More eject handling updates
* Manpage updates
* Logging update
* Changed debug level
* Logging update
* Log capacity of all media types
* Logging update
* Encapsulated disk.blocks
* Encapsulated sector size
* Added overrides
* Added more overrides
* Fixed error message
* Fixed typos
* Fixed logging
* Added logging
* Use PrimaryDevice when calling Inquiry
* Comment update
* Changed default buffer size for testing
* Reverted last change
* Removed debug output
* De-inlined methods because optimized code did not work with them inlined
* Web interface can attach Daynaport again
* Improved handling of read-only hard disks
* Fixed issue with "all" semantics of DETACH
* rasctl supports adding removable media devices without providing a filename
* Removed unused flag in PbDeviceDefinition
* Updated rasctl output for ecjected media (resolves issue #199)
* Validate default folder name when changing default folder
* Added support for explicit file type
* Check file type
* Manpage update
* Removed device file work-around, an explicit type can be used instead
Co-authored-by: akuker <akuker@gmail.com>
* Use ioexception for file open error handling
* Use standard string comparison functions
* Error message update
* Improved CD-ROM handling error messages
* PbDevice returns information on whether a device is removable
* Fixed log message
* Added additional status data (ejectable, protctable, removable)
* Assume ejectable == removable
* Removed obsolete fields
* Added locked/lockable to interface
* Code review
* Logging update
* The user should be allowed to also write protect hard disk drives
* Updated error handling
* Testing
* INSERT also has to search in the default file folder
* Added TODO
* Manpage update
* Message updates
* Moved some sanity checks to the server, so that they are run for any client
* Updated error handling
* Moved CR/LF handling to the client, the server should not format too much
* rascsi should not mention "rasctl" in its messages, there may be other clients
* Improved error messages
* Improved error handling by returning an error string
* Added TODO
* Moved check for duplicate ID to ProcessCmd()
* Removed debug output
* Moved include
* Removed obsolete includes, updated includes
* Reverted ready check
* Fixed error messages
* Added convenience method
* Simplified error handling
* Socket/error handling review
* "NO MEDIA" is added by the client, not by the server
* Added missing include
* Only check for duplicate ID when attaching a device
* Added type/string converters for PbDeviceType
* PbDevice indicates whether image files are supported
* Write-protecing a read-only devices is not treated as an error anymore
* Updated read-only check
* Made difference between read-only and protected more explicit
* Added comment
* Comment update
* Made hard disk drives write-protectable by the user
* Resolved https://github.com/akuker/RASCSI/issues/166
* Addressing compiler error - type needs to be initialized
Co-authored-by: akuker <akuker@gmail.com>
* Extended protobuf interface with rascsi server information
* Added default_image_folder (to be used in a different feature)
* Remember log level because not all versions of spdlog support get_log_level()
* Display enum names instead of values
* Added support for default image folder
* Added method that returns the available image files
* Added list of image files to protobuf interface
* Error handling update
* Filter image files
* Update setting up image file list
* Message update
* Replaced if/else cascade by switch
* Updated log level handling
* Renaming, sort rasctl list output
* Added -lstdc++fs (required by gcc 8.3.0)
* Changed option shortcut
* Sorted log levels by severity
* Fixed sorting of log levels
* Use map for storing available log levels
* Replaced explicit typ
* Revert "Replaced explicit typ"
This reverts commit 4106c15d6f.
* Revert "Use map for storing available log levels"
This reverts commit 505751e64a.
* Added comments
* Removed needless CR/LF when logging
Co-authored-by: akuker <akuker@gmail.com>
* Move to bjoern
* Stream upload
* wip
* Streams
* check for filename
* Allow easyinstall to be scripted
* Tell user we're done
* show help
* ignore hfdisk
* fix var
* Allow override of remote by setting GIT_REMOTE, default to origin
* Better handling of local changes
* Give user more info
* Fix#156 - show all supported types in web interface
* *.mos does not seem to be valid - ractl throws error
* Try some minor optomizations
Error handling
* Add keywords to support rasctl port testing
* Rascsi service should be restarted at the end of the test, not started
Co-authored-by: akuker <akuker@gmail.com>
* Removed FASTCALL and INLINE, added translations, update Disk constructor
* Disk ID cannot be empty, ensured by assertion in constructor
* Disk ID cannot be empty, ensured by assertion in constructor
* Removed all BAREMETAL ifdefs
* Cleaned up subfolders
* Fixed regression
* Re-added underscores
* Fixed merge conflicts
* Assume RASCSI is always defined
* Fixed mege issue
* Re-added result message
* Added Devices message to protobuf interface
* Fixed typo
* Fixed include file names
* Updated files to be ignored by git
* Merge with develop branch
* Synchronized output with develop branch
* Fixed missing dependency, causing issues when running "make -j1"
* Fixed handling of connection errors
* Improved protobuf interface upwards compatibility
* Use -g instead of -s, this has less conflict potential with future options
* Made log level options consistent (rascsi and rasctl used a different option)
* Error() supports passing Sense Key and ASC, REQUEST SENSE returns these data
* Synchronized error handlign with sasidev_ctrl
* Added warning for missing sense key
* Logging and comment update
* Updated invalid LUN handling
* Updated REQUEST SENSE
* Revert "Updated REQUEST SENSE"
This reverts commit 61a1ecbca7.
* Report MEDIUM NOT PRESENT if capacity cannot be determined
* Updated handling of non-existing LUNs. This change results issue #124.
* Log a warning if drive capacity cannot be determined
* Added enums for sense keys and ASCs
* Updated Error() signature to use enums
* Fixed compiler warnings
* Merge with develop branch
* Removed useless assertions
* Finalized removal
* Pointer was passed instead of integer value
* Fixed data type issue on 64 bit compile platforms
* Added missing virtual destructor (gcc warning)
* Added option for setting log level at rascsi startup
* Report an error if only an extension without a basename is provided
* Improved device file support
