mirror of https://github.com/akuker/RASCSI.git
Updated Dayna Port Command Set (markdown)
parent
211c080cda
commit
36d0c8bc62
|
@ -42,7 +42,27 @@ Type: Input (Transitions to DATAOUT)
|
||||||
|
|
||||||
Host then sends: `00 09 00 07 FF FF FF 00` (The last 00 might not actually be there?)
|
Host then sends: `00 09 00 07 FF FF FF 00` (The last 00 might not actually be there?)
|
||||||
|
|
||||||
Note: The AppleTalk broadcast address is 09:00:07:ff:ff:ff. So this command probably has something to do with setting up AppleTalk?
|
Note: The AppleTalk broadcast address is 09:00:07:ff:ff:ff.
|
||||||
|
|
||||||
|
This is probably configuring the Multicast Address Registers of the [DP83902A Ethernet receiver](./docs/DP83902A.pdf) inside the DaynaPort SCSI Link
|
||||||
|
|
||||||
|
10.9 MULTICAST ADDRESS REGISTERS (MAR0 –MAR7)
|
||||||
|
|
||||||
|
The multicast address registers provide filtering of multicast
|
||||||
|
addresses hashed by the CRC logic. All destination addresses
|
||||||
|
are fed through the CRC logic and as the last bit of the
|
||||||
|
destination address enters the CRC, the 6 most significant bits
|
||||||
|
of the CRC generator are latched. These 6 bits are then decoded
|
||||||
|
by a 1 of 64 decode to index a unique filter bit (FB0 –63) in
|
||||||
|
the multicast address registers. If the filter bit selected is
|
||||||
|
set, the multicast packet is accepted. The system designer
|
||||||
|
would use a program to determine which filter bits to set in
|
||||||
|
the multicast registers. All multicast filter bits that
|
||||||
|
correspond to multicast address accepted by the node are then
|
||||||
|
set to one. To accept all multicast packets all of the
|
||||||
|
registers are set to all ones.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
## Enable/disable Interface (0e)
|
## Enable/disable Interface (0e)
|
||||||
Command: 0e 00 00 00 00 XX (XX = 80 or 00)
|
Command: 0e 00 00 00 00 XX (XX = 80 or 00)
|
||||||
|
|
Loading…
Reference in New Issue