Reference_Design_Library/Connector Shield for Macintosh II-Family Computer/README.md
2021-11-22 00:28:47 -05:00

49 lines
1.7 KiB
Markdown

[Reference Design Library](../)
<img src="docs/Connector Shield for Macintosh II-Family Computer.png" alt="Mac DB15 to VGA v 1.0" />
# Connector Shield for Macintosh II-Family Computer
This card shield is used on NuBus and PDS cards of many Macintosh models. The 3D model is based off the dimensions shown in [Designing Cards and Drivers for -the Macintosh Family Third Edition](docs/Connector Shield for Macintosh II-Family Computer_specs.png). The bracket model has no holes and is meant to be modified for whatever suits your needs. It supposed to use M3 screws like the original brackets. You can tap the bracket with a M3 screw or tap.
## Printing Notes
The wall thickness is set to 0.8mm like the metal brackets. It's recommended to print the bracket with 100% infill.
## License
<a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png" /></a>
This work is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/4.0/">Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License</a>.
I reserve the right to allow this to be used for commercial purposes.
## Community
For more great retro hardware projects and a great community check out:
[<img src="../docs/tinker_different_sat_rev_600.png" alt="Tinker Different" style="float: left;" />](https://tinkerdifferent.com/)
Join us in #skunkworks on [Discord](https://discord.gg/GKcvtgU7P9) to help make retro solutions available to all.
[<img src="../docs/discordbanner.png" alt="Discord Open Retro SCSI skunkworks" style="float: left;" />](https://discord.gg/GKcvtgU7P9)