1.4 KiB
1.4 KiB
Bill of Materials for PowerBook adapter for BlueSCSI
https://github.com/xunker/bluescsi_pb/BOM.md
To assemble v1.1 the board, you will need the following components:
Required
Quantity | Thing | Example Part Number |
---|---|---|
1 | An STM32 "Blue Pill" module and a way to program it with the BlueSCSI firmware | |
2 | 330 Ohm Resistor Network in SIP-10 package | Bourns 4610X-101-331 |
2 | 220 Ohm Resistor Network in SIP-10 package | Bourns 4610X-101-221 |
1 | MicroSD Card connector (or use SD-to-MicroSD adapter as shown here) | Molex 104031-0811 |
1 | 2x20 right-angle 2mm header for connector J1 | |
2 | 1x2 header pins for the termination jumper connectors J4 and J5 | |
2 | Jumpers (aka jumper caps, shunts, or shorts) for J4 and J5 |
Optional
Quantity | Thing |
---|---|
1 | 1x4 2.54mm right-angle header for debugging connector |
2 | 1x2 header pins for the power selection jumper connectors J9 and J10 |
1 | 2x25 2.54 header pins for 50-pin desktop SCSI connector J8 |
1 | LED for D1 |
1 | Resistor (R1) for LED, any value from 330 ohms to about 1.8k ohms will work |
2 | "low-profile" female headers if you do not want to permanently solder the Blue Pill board |