Firmware for Mac ROM SIMM programmer

Doug Brown a1ca591d60 The same short is never repeated twice with the same 2 pins now. However -- if there's a short between 1, 2, and 3 -- it will still show a short between 1 and 2, 1 and 3, and 2 and 3, even though that info is somewhat redundant. But the host software can iron all that out.		2011-12-18 14:18:49 -08:00
.settings	Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.	2011-12-13 21:56:20 -08:00
LUFA	Added LUFA into the project, right now just for some demo stuff.	2011-12-09 22:11:31 -08:00
tests	The same short is never repeated twice with the same 2 pins now. However -- if there's a short between 1, 2, and 3 -- it will still show a short between 1 and 2, 1 and 3, and 2 and 3, even though that info is somewhat redundant. But the host software can iron all that out.	2011-12-18 14:18:49 -08:00
usb_serial	Fixed a tiny mistake -- forgot to say the name of one of my enums after the typedef.	2011-12-18 12:00:22 -08:00
.cproject	Started writing more command handling	2011-12-11 08:35:53 -08:00
.gitignore
.project
chip_id.h	Started writing more command handling	2011-12-11 08:35:53 -08:00
delay.c
delay.h
Descriptors.c	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
Descriptors.h	Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.	2011-12-10 10:35:41 -08:00
external_mem.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
external_mem.h	Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.	2011-12-11 21:48:26 -08:00
main.c	Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.	2011-12-13 21:56:20 -08:00
mcp23s17.c	Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.	2011-12-17 13:43:12 -08:00
mcp23s17.h
ports.c	Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.	2011-12-17 11:18:56 -08:00
ports.h