Doug Brown d0b50e15c9 Removed old dead code from external_mem.c

2012-05-13 17:06:57 -07:00

.settings

Fixed bug that screwed up reading after doing an electrical test.

2012-03-04 12:03:02 -08:00

LUFA

Added LUFA into the project, right now just for some demo stuff.

2011-12-09 22:11:31 -08:00

tests

Fixed bug that screwed up reading after doing an electrical test.

2012-03-04 12:03:02 -08:00

usb_serial

Electrical status "OK" reply is now sent immediately. Before, it was

2012-05-13 09:40:04 -07:00

.cproject

Added .bin file generation for firmware upload

2012-03-04 17:28:15 -08:00

.gitignore

Initial import of my test code for the SIMM programmer board. Right now

2011-11-25 23:10:30 -08:00

.project

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

cdc_device_definition.c

Did some more splitting of responsibilities in the code

2011-12-26 15:02:39 -08:00

cdc_device_definition.h

Did some more splitting of responsibilities in the code

2011-12-26 15:02:39 -08:00

chip_id.h

Started writing more command handling

2011-12-11 08:35:53 -08:00

delay.c

Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.

2011-12-04 16:30:26 -08:00

delay.h

Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.

2011-12-04 16:30:26 -08:00

Descriptors.c

Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.

2011-12-11 21:48:26 -08:00

Descriptors.h

Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.

2011-12-10 10:35:41 -08:00

external_mem.c

Removed old dead code from external_mem.c

2012-05-13 17:06:57 -07:00

external_mem.h

Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.

2011-12-11 21:48:26 -08:00

main.c

Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h

2012-01-26 20:42:42 -08:00

mcp23s17.c

Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.

2011-12-17 13:43:12 -08:00

mcp23s17.h

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

ports.c

Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.

2011-12-17 11:18:56 -08:00

ports.h

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

programmer_protocol.h

Tried to do some better commenting in usb_serial.c, also tried to do a better job of documenting the protocol in programmer_protocol.h

2012-01-26 20:42:42 -08:00

Description

Firmware for Mac ROM SIMM programmer

35 MiB

Languages

C 97.5%

Makefile 1.8%

Assembly 0.4%

CMake 0.3%