Macintosh-SW/mac-rom
1
0
Fork 0
mirror of https://github.com/elliotnunn/mac-rom.git synced 2024-12-28 01:29:20 +00:00
Code Issues Projects Releases Wiki Activity
0c319592a9
mac-rom/OS/CudaMgr.a

1669 lines
62 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

************************************************************************
;
; File: CudaMgr.a
;
; Contains: Contains low level code to support sending and receiving
; packets (ADB, Pseudo Commands, Ticks, etc) to/from the Cuda
; 6805uC. Uses some common routines that are in EgretMgr.a and
; EgretPatches.a. The Egret/Caboose Firmware and the Cuda firmware
; use the same globals area and parameter blocks.
;
;
; Written by: Gary Rensberger
; Modified by: Gus Andrade
; Cuda Port by: Ray Montagne
; Modified by: Greg Schroeder
;
; Copyright © 1990-1993 by Apple Computer, Inc. All rights reserved.
;
; Change History (most recent first):
;
; <SM14> 11/9/93 KW added some eieioSTP macros. Only expands for CygnusX1 ROM
; <SM13> 9/29/93 SAM From mc900ftjesus.
; <MC2> 9/25/93 SAM Sucked over CudaDispatch from CudaMgrPatch.a (in the Gibbly).
; <SM12> 6/14/93 kc Roll in Ludwig.
; <LW8> 6/11/93 chp Enabling interrupts too broadly across the Cuda Manager results
; in frequent system hangs when using LocalTalk. Extensive
; performance analysis indicates that Cuda Manager interrupt
; latency is worst when calling _CudaDispatch with interrupts
; masked (see also: the Reliability Manager) and in the loop
; waiting for the first byte of a command packet to shift out of
; the VIA. SCC interrupts are now reenabled just before this wait
; loop, but not in CudaShiftRegisterIRQ.
; <LW7> 5/21/93 GS (chp,mal,fau) Really fixed the LW6 fix of making sure the
; interrupt level moves from 7 back down to 3 after the first byte
; of the transaction has been moved into the Shift Reg in
; CudaDispatch.
; <LW6> 5/14/93 GS Changed the interrupt level from level 3 to 7 around some time
; critical code during the sample of the TReq line and moving the
; first byte of a transaction into the SR of the VIA.
; <LW5> 5/10/93 chp During Cuda transactions, disable interrupts only through level
; 3 instead of through level 6. This markedly improves handling of
; MIDI, DMA, and DSP interrupts. Fixes RADAR #1059613. Reviewed by
; God and both houses of Parliament.
; <LW4> 1/28/93 mal Fixed typo where D7 used instead of D0. Fixes bug #1062496.
; <LW3> 1/14/93 GS Fix a mis-typed label.
; <LW2> 1/14/93 GS (RBM) Fix the occassional hang at boot. When outputing from
; the VIA to Cuda, the interrupt will occur prior to the rising
; edge of CB1. Delay long enough for the edge to occur before
; acknowledging the shift register interrupt.
; <SM11> 11/20/92 GS Removed the support for the Cuda PDMsgs by removing routines
; CudaPDMPatch, CudaKeyBdSwHandler, and associated routines. This
; function is now handled by the Gibbly.
; <SM10> 11/5/92 SWC Changed ShutdownEqu.a->Shutdown.a.
; <SM9> 10/20/92 fau Changed CudaInit to use A2 instead of A1. This was required
; because routines in Universal.a that happenned after the call to
; CudaInit were depending on A1 being set up.
; <SM8> 10/8/92 GS Added code to the KeybdSwHnadler to inhibit calls to the
; OSDispatcher if the Trap is not yet installed by the System.
; <SM7> 10/7/92 GS [RBM,TJR] Added call to initialize vector in Cuda manager
; globals with pointer to the power message resume procedure.
; Added dispatch selector to execute the power message resume
; procedure.
; Needed to initialize the high word of d7 before going to
; Error1Handler.
; If interrupts get disabled while Cuda is in the process of
; generating an IDLE acknowledge, a subsequent attention byte
; could cause the IDLE acknowledge and ATTENTION byte to be
; appended into the current response packet.
; Changed the handling of response packets such that when the last
; byte has been received, the Cuda manager will wait for the IDLE
; acknowledge (should occur within 71.5µS minimum of negation of
; TIP).
; <SM6> 9/18/92 GS Re-Enable the CudaEnableKeybdNMI routine because of the Vector
; table. Cuda No longer uses this routine, but there was a vector
; set aside for it. This needs to be addressed in a later version
; of the ROM.
; <SM5> 9/18/92 GS (rbm) If interrupts get disabled while Cuda is in the process
; ofgenerating an IDLE acknowledge, a subsequent attention byte
; could cause the IDLE acknowledge and ATTENTION byte to
; beappended into the current response packet. Changed the
; handling of response packets such that when the last byte has
; been received, the Cuda manager will wait for the IDLE
; acknowledge (should occur within 71.5µS minimum of negation of
; TIP).
; (gaa/rbm) Modified CudaInit to check if Cuda was trying to start
; a transaction prior to starting the Sync Ack process. This
; fixed a bug where DeadCuda was called because the timeout would
; be reached because
; Cuda was trying to start a transaction and the system side
; thought that it was in the middle of a Sync Ack cycle.
; Update Tickle Timer to 160 count. Decr Timer in Cuda FW is at
; 16cnts/sec.
; Remove Completion routine in TickleCuda routine.
; <SM5> 8/24/92 GS Added code in the IRQDispatcher to fix the bug that passed back
; data in a Read6805 request, when the data bytes reqquessted was
; zero. The fix will chk the recvDataCnt var of the Parm blk before
; placing data in the recv buffer ptr.
; <SM4> 6/30/92 GS Fixed a problem in the Cuda Dispatcher. If a collision occurs,
; wait for the busy state flag to be cleared by the IdleAck
; handler before accepting another command. This problem causes
; the ADB transactions to get out of sync and the system will
; hang.
; <SM3> 6/26/92 GS (RBM) Updated 'SetTransferParams' so that special setup for
; 'RdWrIIC' is performed. This command requires a non conforming
; parameter
; block in that the EgretPB.ByteCnt requires the number of bytes
; to send prior to the data portion of the IIC transaction and
; EgretPB.BufPtr points to a pString. On write, the pString
; contains the data to write while on read operations, the pString
; contains only a count of bytes to read. Data is then returned
; inthe pString.
; Removed Cuda Cmds to enable Keyboard NMI, and IIC mode. These
; are no longer need, because KeyboardNMI now defaults to Enabled.
; SetDFACorIIC mode is no longer a command. IIC and DFAC both use
; use the Data and Clk pins in the same mode.
; EnableWakeUpMode is now done with a CDev.
;
; <SM2> 5/25/92 RB Removed definition of 'CUDA' since it has a conflict with
; another symbol and it is not used anyway. Also got rid of
; 'branch to next instruction warning.
; <1> 5/22/92 RB first checked in
; <SM1> 5/21/92 RB First Checked in. Got rid of OverPatch area and PadForOverPatch
; conditionals.
; <P4> 3/23/92 GS Fixed bug in code rolled in from the Regatta System files in
; the CudaShiftRegIRQ routine. Incorrectly, entered the
; tickcompletion routine with bogus values then placed into the
; TIME lomem
; <P3> 3/3/92 GS Updated the INIT of Cuda to include the IIC and Wakeup modes.
; Also added the Enable Keybd NMI cmd to CudaINIT.
; <P2> 2/10/92 GS Cleaned up some comments. Must return here to add in code for
; checks of the use of DFAC or IIC mode used on Cuda depending on
; machine type.
; <1> 1/16/92 GS first checked in
; ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
; Pre-Pandora ROM comments begin here.
; ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
; ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
; Previous history
; ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
; Changes for Cuda:
; {9} 08/21/91 gjs added patch to align code in Egret/Cuda Dispatch code. Patch
; placed in CudaPatches.a
; {8} 07/30/91 gjs Preserved/Restored status register on calls to the completion
; routines in ShiftRegIRQ routine at @Implicit, and at routine
; delay100us
; {7} 07/03/91 gjs Overpatched the CudaInit code into CudaPatchesToo.a
; added Export DeadCuda
; {6} 06/24/91 gjs Rolled the Cuda Manager changes into Terror
; <5> 2/20/91 BG Fixed error in CheckPacket. The check for allowable
; pseudo-packets was a hard-coded name check instead of an
; end-of-table check.
; <4> 12/11/90 JJ Mac LC: Changes references to VISAChipBit to V8ChipBit.
; <3> 12/7/90 CCH Adjusted the patch code in CheckPacket so that it fits in the
; same number of bytes as the original code.
; <2> 12/6/90 BG (with GA) Rolled in Eclipse-related Egret/Caboose changes.
;
; <01> 12/6/90 RBM Ported Cuda manager from Egret manager <Eclipse version>.
; Due to major changes in the transaction protocol, Egret is no longer supported.
; ROM builds should include IF HasCUDA for startinit & diagnostics.
; Changed handshake protocol to implement CUDA. Eliminated timed
; assertions/negations & inverted polarity of handshake lines that
; are controlled by the system. Handshake line signal names have
; been changed to avoid confusion in usage. Added an Idle State
; acknowledgement after termination of a response packet transaction.
; Exit from ShiftRegIrq now restores the interrupt mask on exit from
; transmission of command packet data.
;
; Restructured code in ShiftRegIrq so that testing the TReq handshake
; line does not occur after manipulation of TIP or ByteAck.
;
; CudaInit no longer needs to send a NOP command to turn off the
; asynchronous transaction sources on ReBoot. This function is
; performed through a 'SYNC' handshake sequence which disables
; all asynchronous message sources.
;
; Exported routines are in a jump table so that any future overpatching
; may be a little easier to implement.
;
************************************************************************
machine mc68020
BLANKS ON
STRING ASIS
PRINT OFF
LOAD 'StandardEqu.d'
INCLUDE 'HardwarePrivateEqu.a'
INCLUDE 'UniversalEqu.a'
INCLUDE 'DebugMonEqu.a'
INCLUDE 'ShutDown.a'
include 'EgretEqu.a'
PRINT ON
eject
CudaMgr PROC EXPORT ; { CudaMgr Proc
EXPORT CudaDispatch, SendCudaCmd, CudaInit
EXPORT CudaTickHandler, CudaShiftRegIRQ
IMPORT GetHardwareInfo, Error1Handler
IMPORT SetResponseParams, CheckPacket
IMPORT PseudoCntTable,ADBCntTable
CudaDebug EQU 1 ; Enables Debug features during development
ErrCudaInit equ $0030 ; TEMPORARY definition of error equate defined in STEQU.a
WITH EgretGlobals,EgretPB,RespHeader
eject ; { With
;________________________________________________________________________________________________
; Routine: CudaDispatch 8f90
;
; Function: This is the Cuda manager trap routine. It waits for Cuda to be idle, sends
; the first byte of the command packet. If Cuda didn't abort, then it sets up
; globals for the IRQ handler, and if a completion routine was specified, it returns
; back to the caller. If no completion routine, then it waits synchronously for
; the command/response to finish, using the busy bit. When the IRQ handler has finished
; the response packet, it preps the globals to expect an auto-response packet
; (ticks or ADB), clears 'busy' and calls the completion routine (if any).
;
; Inputs: a0 - pointer to parameter block as followsÉ
;
; pbPacketType dc.b
; pbCmd dc.b
; pbParam dc.b
; dc.b
; dc.b
; dc.b
; pbByteCnt dc.w
; pbBufPtr dc.l
; pbFlags dc.b
; dc.b
; pbResult dc.w
; pbCompletion dc.l
;
; Outputs: d0 - result (0 for now)
;
; Destroys: a0-a2, d0-d1
;________________________________________________________________________________________________
CudaDispatch
jsr CheckCudaPacket ; Validate the Packet type & command byte
tst.w pbResult(a0) ; is packet ok?
bne @done ; Exit if Error packet
movea.l EgretBase,a2 ; a2 gets ptr to globals
movea.l VIA,a1 ; a1 points to VIA base
cmpi.b #specialPkt,pbCmdType(a0) ; is this a special command?
bne.s @ckPDMInit ; check for Eclipse PowerDown Message Initialization
move.l a0,ADBpb(a2) ; yes, is to set the ADB param block (for autopoll data).
bra @done
@ckPDMInit
cmpi.b #PDMVectPkt,pbCmdType(a0) ; check for PowerDown message vector Init
bne.s @ckContInit
move.l pbParam(a0),PDMComp(a2) ; handler for Eclipse PowerDown Message Packet
bra @done
@ckContInit
cmpi.b #ContinueVectPkt,pbCmdType(a0) ; check for PowerDown message vector Init
bne.s @ckDoCont
move.l pbParam(a0),ContinueComp(a2) ; handler for power message continue procedure
bra @done
@ckDoCont
cmpi.b #DoContinueProc,pbCmdType(a0) ; check for PowerDown message vector Init
bne.s @CudaRestart ; Must be Egret Command
tst.l ContinueComp(a2) ; is there a continue procedure?
beq @done ; no, then do nothing
lea ContinueComp(a2),a2
move.l (a2),a2
jsr (a2) ; else, execute the continue procedure
bra @done
@CudaRestart
CmpI #$10C, (A0)
BEQ.B @L4
CmpI #$107, (A0)
BNE.B @endChicanery
Tst.B $64(A2)
BEQ @endChicanery
@L4 CmpI #$100, $2(A0)
BLT.B @L5
Move #$FFCE, $E(A0)
Bra @done
@L5 Lea.L $66(A2), A2
Move $6(A0), D1
BEQ @L9
SubQ #$1, D1
MoveQ.L #$0, D2
Move $2(A0), D2
MoveA.L $8(A0), A1
@L6 CmpI.B #$7, $1(A0)
BEQ.B @L7
Move.B (A1)+, $0(A2,D2.W)
Bra.B @L8
@L7 Move.B $0(A2,D2.W), (A1)+
@L8 AddQ #$1, D2
AndI #$FF, D2
DBF D1, @L6
@L9 MoveA.L ($DE0), A2
MoveA.L ($1D4), A1
CmpI.B #$C, $1(A0)
BEQ.B @endChicanery
Tst.L $10(A0)
BEQ @done
MoveA.L $10(A0), A1
Jsr (A1)
Bra @done
@endChicanery
move.w sr,-(sp) ; save SR
ori.w #hiIntMask,sr ; mask interrupts
eieioSTP
btst.b #TReq,vBufB(a1) ; does Cuda want to abort?
eieioSTP
beq.s @abort ; yes, wait for it to go away
btst.b #busy,flags(a2) ; has an idle acknowledge occured?
bne.s @abort ; no, then wait for it!
bset.b #busy,flags(a2) ; not an abort, mark that we're busy.
beq.s @sendPackType ; we were not busy before, so try to send the first byte
@abort move.w (sp)+,sr ; we were busy, enable interrupts
jsr pollByte ; poll shift reg, calling handler if interrupts masked
bra.s @endChicanery ; and keep waiting for busy to go away...
@sendPackType ; interrupts masked here
eieioSTP
bset.b #SRdir,vACR(a1) ; switch to output, Define direction FROM System
nop
eieioSTP
move.b pbCmdType(a0),vSR(a1) ; send command packet to shift reg
nop
eieioSTP
bset.b #vByteAck,vBufB(a1) ; make sure state is idle before transaction
nop
eieioSTP
bclr.b #TIP,vBufB(a1) ; assert TIP (we're starting command packet)
nop
eieioSTP
;
; If PollProc exists, Poll the SCC and save any available data
; When the shift register irq comes in call the PollProc
; then process the shift register irq data
;
movem.l d0-d3/a0-a4/a6,-(sp) ; save some registers
move.l PollStack,-(sp) ; save previous poll stack
lea @zero, a3
move.l sp,PollStack ; Pointer to buffer for polled bytes
; btst.b #0,SccIopFlag ; Check if we are in IOP mode (On Eclipse...)
; beq.s @wait
tst.l PollProc ; Check for a Poll Proc available
beq.s @wait ;
movea.l SccRd,a3 ; SCC may have data to get
movea.l a3,a6
addq.l #Actl,a3 ; Point to data available register (RR0)
addq.l #AData,a6 ; Point to the SCC data register
@wait btst.b #RxCa,(a3) ; Test for SCC data available
beq.s @2
move.b (a6),-(sp) ; Push the data on the stack
@2
bsr.l otherDelay
eieioSTP
btst.b #vShift,vIFR(a1) ; now wait for shift reg IRQ
eieioSTP
beq.s @wait
cmpa.l PollStack,SP ; Is there any poll data
beq.s @NoSCCData
;
; We have SCC data and a Poll Proc to call. Go call it
;
pea @NoSCCData ; Return addr for PollProc
move.l PollProc,-(SP) ; Point to the PollProc
rts ; Call the PollProc
@zero dc.w 0
@NoSCCData
move.l (sp)+,PollStack ; restore previous poll stack
movem.l (sp)+,d0-d3/a0-a4/a6 ; restore work registers
eieioSTP
btst.b #TReq,vBufB(a1) ; did CUDA abort?
eieioSTP
bne.s @accepted ; no, then it will accept our packet
;-----------------------------------------------------------------------------------------------
; Note that changing the VIA mode can generate an edge internal to the VIA which will
; increment the bit count for the next byte to be shifted.
; When outputing from the VIA to Cuda, the interrupt will occur prior to the rising edge
; of CB1. Delay long enough for the edge to occur before acknowledging the shift
; register interrupt. (R. Montagne 1/11/93)
;________________________________________________________________________________________________
move $d00,d0
divu #$50,d0
@mode7delay
dbra d0,@mode7delay
eieioSTP
bclr.b #SRdir,vACR(a1) ; yes, switch back to input
nop
eieioSTP
tst.b vSR(a1) ; clear pending shift register interrupt
nop
eieioSTP
ori.b #((1<<TIP)|\ ; abort the current transaction
(1<<vByteAck)),vBufB(a1) ;
nop
eieioSTP
@abortAck
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; now wait for shift reg IRQ to acknowledge abort
eieioSTP
beq.s @abortAck ;
jsr CudaCallShiftRegIRQ ; handle it
bra.s @abort ; and wait
@accepted ; we sent the packetType, now set up for the IRQ handler
jsr SetTransferParams ; setup globals for this packet
jsr CudaCallShiftRegIRQ ; transfer second byte (command) to start things
move.w (sp)+,sr ; now enable interrupts
tst.l pbCompletion(a0) ; do we have a completion routine
bne.s @done ; yes, then return asynchronously
@waitComplete
btst.b #busy,flags(a2) ; otherwise, are we still busy?
beq.s @done ; no, then we're done...
jsr pollByte ; yes, poll out a byte if necessary
bra.s @waitComplete ; and wait here (synchronously)
@done moveq #0,d0 ; no errors for now
rts
;________________________________________________________________________________________________
; Routine: PollByte 914e
;
; Function: This routine checks to see if level 1 interrupts are masked, exits if not.
; If masked, it polls the flag register for a shift reg interrupt, and
; calls the handler if found.
;
; Inputs: a1 - VIA base ptr
; a2 - globals pointer
;
; Outputs: none
;
; Destroys: d0,d1
;________________________________________________________________________________________________
; Export PollByte
PollByte
move.w sr,d0 ; get 68xxx interrupt mask
andi.w #hiIntMask,d0 ; are we at interrupt level?
beq.s @exit ; no, just exit
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; yes, poll the shift reg
eieioSTP
beq.s @exit ; no shift reg interrupt, return
bsr.s CudaCallShiftRegIRQ ; yes, handle it
@exit rts
;________________________________________________________________________________________________
; Routine: SendByte 9168
;
; Function: This routine transmits a byte by writing to the via shift register and
; then changes the state of vByteAck to indicate that the via shift register
; contains data ready to be read.
;
; Inputs: d0 - byte to send
; a1 - VIA base ptr
;
; Outputs: none
;
; Destroys: d1
;________________________________________________________________________________________________
; Export SendByte
SendByte
eieioSTP
move.b d0,vSR(a1) ; send the byte to the shift reg
nop
eieioSTP
eori.b #1<<vByteAck,vBufB(a1) ; let Cuda know it's there
nop
eieioSTP
rts
;________________________________________________________________________________________________
Export CudaCallShiftRegIRQ
CudaCallShiftRegIRQ
movem.l a0-a3/d0-d3, -(sp) ; save regs like interrupt handler does
move.w sr, -(sp) ; save status reg
movea.l Lvl1DT+8,a0 ; get the shift reg IRQ handler
jsr (a0) ; call it
move.w (sp)+, sr ; restore status reg
movem.l (sp)+, a0-a3/d0-d3 ; restore regs
rts
;________________________________________________________________________________________________
; Routine: CudaShiftRegIRQ 9176
;
; Function: This routine is called in response to a VIA shift reg interrupt. It will transfer
; the next byte in the current packet. When the packet is complete, the globals are
; prepped for an auto-response packet (ADB/Ticks), then the completion routine
; is called (if present).
;
; Cuda Transaction States -
; ___ ____
; ViaDir TIP vByteAck TReq
; 0 0 0 0 Receive Data Byte
; 0 0 0 1 Receive Last Data Byte
; 0 0 1 0 Receive Data Byte
; 0 0 1 1 Receive Last Data Byte
; 0 1 0 0 Abort/Sync
; 0 1 0 1 Abort/Sync
; 0 1 1 0 Attention
; 0 1 1 1 Idle
; 1 0 0 0 illegal
; 1 0 0 1 Transmit Data Byte
; 1 0 1 0 illegal
; 1 0 1 1 Transmit Data Byte
; 1 1 0 0 Abort/Sync
; 1 1 0 1 Abort/Sync
; 1 1 1 0 illegal
; 1 1 1 1 Idle
;
; Inputs: a1 - VIA base ptr
;
; Outputs: a2 - globals pointer
;
; Destroys: a0-a2,d0-d3
;________________________________________________________________________________________________
CudaShiftRegIRQ
move.w sr,d3
ori.w #hiIntMask,sr ; mask interrupts <LW8><LW5>
btst.b #vShift,vIFR(a1)
bne.s @output
move.w d3,sr ; restore interrupts
rts
;________________________________________________________________________________________________
; When outputing from the VIA to Cuda, the interrupt will occur prior to the rising edge
; of CB1. Delay long enough for the edge to occur before acknowledging the shift
; register interrupt. (R. Montagne 1/11/93)
;________________________________________________________________________________________________
@output
movea.l EgretBase,a2 ; get ptr to globals <13>
bset.b #busy,flags(a2) ; make sure we're marked as busy
btst.b #$4, $1600(A1)
beq.s * + $60 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
move $d00,d0
divu #$50,d0
@mode7delay
dbra d0,@mode7delay ; <LW2><VIA rbm>
eieioSTP
tst.b vSR(a1) ; clear the shift reg interrupt
nop
eieioSTP
tst.w sendHdrCnt(a2) ; any bytes left in header?
ble.s @ckSendData ; no, see if any send bytes left...
movea.l sendHdrPtr(a2),a0 ; get ptr to header
move.b (a0)+,d0 ; get next header byte
move.l a0,sendHdrPtr(a2) ; and update header ptr
bsr SendByte ; send the byte
subq.w #1,sendHdrCnt(a2) ; count it
bra @exit ; and exit
@ckSendData
tst.w sendDataCnt(a2) ; any bytes left in data to send
ble.s @CmdFinished ; no, then we're finished with command packet
movea.l sendDataPtr(a2),a0 ; get current data ptr
move.b (a0)+,d0 ; yes, get next data byte
move.l a0,sendDataPtr(a2) ; and update the ptr
bsr SendByte ; send it
subq.w #1,sendDataCnt(a2) ; count it
bra @exit ; and exit
@CmdFinished
eieioSTP
bclr.b #SRdir,vACR(a1) ; now switch to input
nop
eieioSTP
;________________________________________________________________________________________________
; When changing VIA direction, a clock can be generated to the VIA bit counter. An
; access to the shift data register will keep the counter in sync with the communications
; protocol to Cuda.
;________________________________________________________________________________________________
eieioSTP
tst.b vSR(a1) ; make sure VIA counter is in sync <LW2><VIA rbm>
eieioSTP
@sendCmd
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a1) ; and set idle state
nop
eieioSTP
bra @exit ; and exit
@input ;-----------------------------------------------------------------------------
eieioSTP
move.b vSR(a1),d0 ; read the byte from shift reg into D0
nop
eieioSTP
tst.w rcvHdrCnt(a2) ; any bytes left in response packet header?
ble.s @ckRcvData ; if not then must be data byte
@getHdrByte
move.w rcvHdrIndex(a2),d1 ; get index into header
lea rcvHeader(a2),a0 ; point to header buffer
move.b d0,(a0,d1.w) ; store byte away
addq.w #1,rcvHdrIndex(a2) ; bump to next byte
subq.w #1,rcvHdrCnt(a2) ; count it
tst.w rcvHdrCnt(a2) ; chk header count
bgt.s @ackHdr ; not done with header yet... exit
;
; If we have an error packet in progres then read 5 bytes instead of 4 for the header.
; A flag will be set on the fourth byte of an error packet and will be cleared
; after reading the fifth byte of the error packet.
;
@CheckError lea rcvHeader(a2),a0 ; point to header buffer
cmp.b #ErrorPkt,1(a0) ; check packet type for error packet
bne.s @ackHdr ; not an error packet go check for data
bclr.b #BadPkt,flags(a2) ; check for error packet in progress flag
bne.s @ackHdr ; we read the fifth byte of the error packet
@readbyte5 addq.w #1,rcvHdrCnt(a2) ; adjust the count before reading the fifth byte
bset.b #BadPkt,flags(a2) ; set the flag then read the fifth byte
bra.s @ackHdr
@ckRcvData
btst.b #TIP,vBufB(a1) ; is a transaction in progress?
bne.w @done ; no, don't buffer the idle acknowledge interrupt
tst.w rcvDataCnt(a2) ; is request for zero bytes?? <SM5>
movea.l rcvDataPtr(a2),a0 ; get ptr to receive data buffer
beq.s @zeroReq ; yes, don't pass any data back <SM5>
move.b d0,(a0)+ ; store the data byte
@zeroReq
eieioSTP
btst.b #TREQ,vBufB(a1) ; was this the last byte?
eieioSTP
bne @lastIrq ; yes, terminate response packet
move.l a0,rcvDataPtr(a2) ; and update data ptr
subq.w #1,rcvDataCnt(a2) ; count it
bgt.s @ack ; not last, normal acknowlege
btst.b #openData,flags(a2) ; is this an open ended data packet?
bne.s @lastIrq ; and we're done
@ack
tst.w rcvDataCnt(a2) ; any receive data bytes to get?
ble @lastIrq ; no, then terminate transaction and exit
@ackHdr
move.b vBufB(a1),d0 ; get current handshake state
andi.b #((1<<TIP)|\
(1<<vByteAck)|\
(1<<TReq)),d0
cmp.b #((1<<TIP)|\ ; is this an idle acknowledge?
(1<<vByteAck)|\
(1<<TReq)),d0
beq @done ; yes, dont handshake.
cmp.b #((1<<TIP)|\ ; is this an attention byte?
(1<<vByteAck)|\
(0<<TReq)),d0
beq.s @attnIrq ; yes
andi.b #((1<<TIP)|\ ; now look at TIP and TReq...
(0<<vByteAck)|\
(1<<TReq)),d0
cmp.b #((0<<TIP)|\ ; is this the last byte?
(1<<TReq)),d0 ;
beq.s @lastIRQ ; yes
@dataIrq
eieioSTP
eori.b #1<<vByteAck,vBufB(a1) ; acknowledge the current byte
nop
eieioSTP
bra @exit ;
@attnIrq
eieioSTP
bclr.b #TIP,vBufB(a1) ; start the response packet transaction
nop
eieioSTP
bra @exit ;
@lastIrq
eieioSTP
ori.b #((1<<TIP)|\ ; no, terminate the response packet transaction
(1<<vByteAck)),vBufB(a1)
nop
eieioSTP
;---------------------------------------------------------------------------
; <SM6> (rbm)
; Now that the response transaction has been terminated, let's wait for the idle <SM6> (rbm)
; acknowledge interrupt to occur. This should happen about 71.5 µS after the negation <SM6> (rbm)
; of TIP. This will prevent any problem related to interrupts being masked during the <SM6> (rbm)
; transmission of the idle acknowledge when another asynchronous Cuda transaction is to <SM6> (rbm)
; begin while interrupts are masked (as may happen during disc access while moving the <SM6> (rbm)
; mouse). <SM6> (rbm)
; <SM6> (rbm)
@waitIdleAck ; <SM6> (rbm)
eieioSTP
bsr.l otherDelay
btst.b #ifSR,vIFR(a1) ; wait for idle state acknowledgement <SM6> (rbm)
eieioSTP
beq.s @waitIdleAck ; <SM6> (rbm)
eieioSTP
tst.b vSR(a1) ; clear the shift reg interrupt <SM6> (rbm)
nop
eieioSTP
;---------------------------------------------------------------------------
@done
movea.l curPb(a2),a0 ; a0 points to current param block
lea rcvHeader(a2),a1 ; a1 points to header buffer
eieioSTP
cmp.b #ErrorPkt,1(a1) ; check for Error response packet
eieioSTP
bne.s @NotError
;
; The current transaction generated an Error <11>
;
move.l 1(a1),pbParam(a0) ; Return the Error Response packet to the caller (dont include attn byte)
move.w #paramErr,pbResult(a0) ; and return a parameter block error
@NotError cmpa.l adbPb(a2),a0 ; was this an implicit command?
beq.s @implicit ; yes, handle autopoll/tick packet
tst.b 1(a1) ; is this an ADB response?
bne.s @ckComp ; no, then data already transfered, call completion
@adbResp
cmpa.l adbPb(a2),a0 ; is this autopoll data
bne.s @skip ; no, don't fix ray's flag
bset.b #EgAutoPoll,2(a1) ; yes, fix em
@skip
btst.b #EgAutoPoll,2(a1) ; check status, is this AutoPoll data?
bne @ckAutoPollComp ; yes, handle if we have completion routine
move.b 2(a1),pbFlags(a0) ; explicit ADB command, stuff flags byte
move.w rcvHdrIndex(a2),d0 ; get header+data byte count
subq.w #4,d0 ; - header bytes
beq.s @dontupdate ; if no data received don't update the byte count
move.w d0,pbByteCnt(a0) ; stuff data byte count
@dontupdate move.l pbBufPtr(a0),a2 ; get users buffer ptr
addq.w #4,a1 ; point at the data
bra.s @cnt
@xfer move.b (a1)+,(a2)+ ; copy the byte
@cnt dbra d0,@xfer ; repeat for all bytes
move.l EgretBase,a2 ; get globals ptr again
@ckComp move.l pbCompletion(a0),d0 ; any completion routine?
beq @exitNoComp ; no, just exit
move.l d0,a1 ; yes, get it's address
move.l a0,-(sp) ; save param block ptr
bigjsr SetResponseParams,a3 ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
move.l (sp)+,a0 ; restore param block ptr
move.w sr,-(sp) ; save register for completion routines that trash it <SM7>
jsr (a1) ; and call it <SM7>
move.w (sp)+,sr ; <SM7>
rts ; <SM7>
;--------------------------------------------------------------------------------------------
; AutoPoll or Tick data, push it on stack and call completion rtn
@implicit
tst.b RespPktType(a1) ; is this an ADB response?
beq.s @ckAutoPollComp ; yes, handle it
cmpi.b #tickPkt,RespPktType(a1) ; is this a short tick response?
beq.s @ckTickComp ; yes, handle it (has no param block)
cmpi.b #pseudoPkt,RespPktType(a1) ; no, should be pseudo command tick response
; ShiftRegIRQPatch from EgretPatchesToo.a
bne.s @ckPDM ; check for PowerDown Message (Eclipse ONLY)
cmpi.b #RdTime,RespCmd(a1) ; yes, it should be read time
bne.s @exitNoComp ; if not read time ignore the transaction (SHOULD NOT HAPPEN!!)
bra.s @ckTickComp ; otherwise, push response packet on stack, call it.
; >>CONTINUE original routine
;-----------------------------------------------
; Eclipse Check for PowerDown Message
;
@ckPDM cmpi.b #PDMPkt,RespPktType(a1) ; check for PowerDown Message Packet type <GAA Eclipse>
bne.s @exitNoComp ; None of the above Packets ignore it (SHOULD NOT HAPPEN)
; if it does EGRET is Very SICK!! <P4>
;
; For PDM packets check for service routine address and
; call it if one exists.
;
move.l PDMComp(a2),d2 ; get the completion routine address
beq.s @exitNoComp ; go away if vector is null <P4>
bigjsr SetResponseParams,a3 ; setup globals to handle auto response packets again
move.l d2,a3 ; call the Service routine
move.b RespCmd(a1),d0 ; get the powerDown Switch destination position
move.w sr,d3 ; save interrupts
jsr (a3)
move.w d3,sr ; restore interrupts
bra.s @exit ; done, now exit
; end ShiftRegIRQPatch EgretPatchesToo.a <P4>
@ckTickComp ; tick data, check for completion routine
move.l tickComp(a2),d2 ; get completion routine in d2
beq.s @exitNoComp ; none specified, just exit
bra.s @push ; otherwise, push response packet on stack, call it.
@ckAutoPollComp ; ADB autopoll data, check for completion rtn
bset.b #EgAutoPoll,2(a1) ; Set AutoPoll bit to fix bug in old Egret parts
tst.l a0 ; do we really have a current param block? (we should)
beq.s @exitNoComp ; no, exit
move.l pbCompletion(a0),d2 ; any completion routine? (keep in d2)
beq.s @exitNoComp ; no, just exit
@push
suba.w #12,sp ; allocate 12 byte buffer on stack
movea.l sp,a2 ; point to the buffer
move.l (a1)+,(a2)+ ; copy response header onto stack
move.l (a1)+,(a2)+ ; copy response data onto stack
move.l (a1)+,(a2)+ ; copy response data onto stack
movea.l EgretBase,a2 ; restore ptr to globals
move.w rcvHdrIndex(a2),d0 ; d0 = # bytes in response header
subq.w #4,d0 ; byte count = # data bytes (strip off header bytes)
bigjsr SetResponseParams,a3 ; setup globals to handle auto response packets again
move.w d3,sr ; restore interrupts
move.l sp,a1 ; a1 = ptr to response packet
addq.l #2,a1 ; a1 = ptr to status flag
move.l d2,a3 ; get completion routine
;
; ¥¥¥¥¥ Calling Completion Routine ¥¥¥¥¥
;
; a0 = Pointer to parameter block
; a1 = Pointer to status flag in response packet (Cuda Transaction Format)
; a2 = Pointer to Cuda Globals
; d0 = Number of bytes in response packet, excluding Attention, Type, Flags & Command.
;
move.w d3, -(sp) ; preserve status reg during completion routine {8}<gjs>
jsr (a3) ; call it (a0 points to param block for ADB)
move.w (sp)+, d3 ; restore status reg
adda.w #12,sp ; pop buffer
rts
@exitNoComp ; no completion routine specified,
bigjsr SetResponseParams,a3 ; setup globals to handle auto response packets again
@exit ;
move.w d3,sr ; restore interrupts
rts
Eject
;________________________________________________________________________________________________
; Routine: SetTransferParams 93e0
;
; Function: This routine sets up transmit/receive ptrs (globals) for the packet pointed to by A0,
; for use by the Shift Reg interrupt handler.
;
; Inputs: a0 - Param block pointer
; a1 - VIA
; a2 - Ptr to globals (EgretBase)
;
; Outputs: none
; Destroys: d0,d1
;________________________________________________________________________________________________
; Export SetTransferParams
SetTransferParams
move.l a1,-(sp) ; save a1
lea pbCmd(a0),a1
move.l a1,sendHdrPtr(a2) ; point to 1st byte of header to send
moveq #0,d0
move.b pbCmd(a0),d0 ; get command
tst.b pbCmdType(a0) ; is this an ADB command?
bne.s @pseudo ; no, must be a pseudo command
andi.b #%00001111,d0 ; keep low 4 bits
biglea ADBCntTable,a1 ; get ptr to our ADB command table
bra @check ; and look up our send/rcv byte counts
;
; Pseudo Command. Now Check for SEND DFAC and treat as special case if it is. <12>
; On DFAC, use the byte count in the parameter block as the count to send <12>
; to Egret instead the count contained in the PseudoCntTable. <12>
;
@pseudo
cmp.b #WrDFAC,pbCmd(a0) ; check for DFAC <12>
bne.s @notDFAC ; use the table if not DFAC <12>
move.w pbByteCnt(a0),d1 ; was Write DFAC use the byte count in the pBlock <12>
addq.w #1,d1 ; include the packet byte already sent <12>
move.w d1,sendHdrCnt(a2) ; set up header byte count <12>
clr.w sendDataCnt(a2) ; no extended data bytes <12>
clr.l sendDataPtr(a2) ; no extended data ptr <12>
bra @rcvParams
@notDFAC cmp.b #$25,pbCmd(a0)
beq @dontjump
cmp.b #RdWrIIC,pbCmd(a0) ; check for IIC transaction <SM3>
bne.s @notRdWrIIC ; use the table if not RdWrIIC <SM3>
*
* Here is how the transfer globals are set up for IIC transactionsÉ
*
* _Parameter______ _RdWrIIC_(write)_____________ _Parameter______ _RdWrIIC_(read)______________
* CudaPB CudaPB
* pbCmdType pseudoPkt pbCmdType pseudoPkt
* pbCmd RdWrIIC pbCmd RdWrIIC
* pbParam[0] IIC Device Addr. pbParam[0] IIC Device Addr.
* pbParam[1] IIC Register Addr. (optional) pbParam[1] IIC Register Addr. (optional)
* pbParam[2] ¥ pbParam[2] ¥
* pbParam[3] ¥ pbParam[3] ¥
* pbByteCnt # fields in pbParam array pbByteCnt # fields in pbParam array
* pbBufPtr myBuffer pbBufPtr myBuffer
* pbFlags ¥ pbFlags ¥
* pbSpare ¥ pbSpare ¥
* pbResult ¥ pbResult ¥
* pbCompletion NIL pbCompletion NIL
* SendHdrCnt CudaPB.pbByteCnt SendHdrCnt CudaPB.pbByteCnt
* SendHdrPtr &CudaPB.pbCmd SendHdrPtr &CudaPB.pbCmd
* SendDataCnt (char)myBuffer[0] SendDataCnt 0
* SendDataPtr &myBuffer[1] SendDataPtr NIL
* RcvHdrCnt 4+0 RcvHdrCnt 4+0
* RcvHdrIndex 0 RcvHdrIndex 0
* RcvDataCnt 0 RcvDataCnt (char)myBuffer[0]
* RcvDataPtr &myBuffer[1] RcvDataPtr &myBuffer[1]
* RcvHeader RcvHeader
* RespAttn ¥ RespAttn ¥
* RespType ¥ RespType ¥
* RespFlags ¥ RespFlags ¥
* RespCmd ¥ RespCmd ¥
* RespData ¥ RespData ¥
* curPB CudaPB curPB CudaPB
*
@dontjump
move.w pbByteCnt(a0),d1 ; RdWrIIC uses byte count for send portion <SM3>
addq.w #1,d1 ; include the packet byte already sent <SM3>
move.w d1,sendHdrCnt(a2) ; set up header byte count <SM3>
move.w #4,rcvHdrCnt(a2) ; 4 byte header default <SM3>
clr.w rcvHdrIndex(a2) ; reset index into header buffer <SM3>
move.l pbBufPtr(a0),a1 ; get address of data buffer <SM3>
cmp.b #RdWrIIC,pbCmd(a0)
beq.s @doIICwrite
btst.b #0,4(a0)
bne.s @doIICread
@doIICwrite ; <SM3>
btst.b #0,pbParam(a0)
bne.s @doIICread
moveq #0,d1 ; data phase count must be 1 to 256 <SM3>
move.b (a1),d1 ; <SM3>
bne.s @wrCntOK ; <SM3>
move.w #$0100,d1 ; <SM3>
@wrCntOK ; <SM3>
move.w d1,sendDataCnt(a2) ; number of extended data bytes to send <SM3>
@newlbl
adda.l #1,a1 ; <SM3>
move.l a1,sendDataPtr(a2) ; extended data ptr <SM3>
clr.w rcvDataCnt(a2) ; no data to receive on IIC write <SM3>
move.l a1,rcvDataPtr(a2) ; but let's point at xmit buffer to be safe <SM3>
bra.s @RdWrIICexit ; <SM3>
@doIICread ; <SM3>
clr.w sendDataCnt(a2) ; no extended data bytes to send <SM3>
clr.l sendDataPtr(a2) ; no extended data ptr <SM3>
moveq #0,d1 ; data phase count must be 1 to 256 <SM3>
move.b (a1),d1 ; <SM3>
bne.s @rdCntOK ; <SM3>
move.w #$0100,d1 ; <SM3>
@rdCntOK ; <SM3>
move.w d1,rcvDataCnt(a2) ; number of extended data bytes to receive <SM3>
adda.l #1,a1 ; <SM3>
move.l a1,rcvDataPtr(a2) ; extended data ptr <SM3>
@RdWrIICexit ; <SM3>
bset.b #openData,flags(a2) ; open ended data packet (RdWrIIC) <SM3>
bra.s @exit ; <SM3>
@notRdWrIIC ; <SM3>
biglea PseudoCntTable,a1 ; get ptr to our pseudo command table
@check
lsl.w #1,d0 ; x 2 for word table
move.w (a1,d0.w),d1 ; get send/rcv byte counts for this command
ror.w #8,d1 ; get send byte count in low byte
tst.b d1 ; is this an open-ended send command?
bmi.s @sendExt ; yes, branch...
move.b d1,d0 ; get byte count from table
ext.w d0 ; extend to word
addq.b #1,d0 ; data bytes + 1 = header byte count
move.w d0,sendHdrCnt(a2) ; set up header byte count
clr.w sendDataCnt(a2) ; no extended data bytes
clr.l sendDataPtr(a2) ; no extended data ptr
bra.s @rcvParams ; now setup receive ptrs
@sendExt moveq #$7F,d0 ; prepare to mask sign
and.w d1,d0 ; get rid of sign
addq.w #1,d0 ; + 1 for command (packet type already sent)
move.w d0,sendHdrCnt(a2) ; set up header byte count
move.w pbByteCnt(a0),sendDataCnt(a2) ; set up data byte count
move.l pbBufPtr(a0),sendDataPtr(a2) ; set up send data ptr
@rcvParams clr.w rcvHdrIndex(a2) ; reset index into header buffer
move.w #4,rcvHdrCnt(a2) ; 4 byte header default
asr.w #8,d1 ; get receive data byte count
bmi.s @rcvExt ; branch for open-ended reads
tst.b pbCmdType(a0) ; reading, is this a pseudo command?
beq.s @rcvADB ; no, must be adb data
lea pbParam(a0),a1 ; pseudo data will be received in pbParam
move.l a1,rcvDataPtr(a2)
move.w d1,rcvDataCnt(a2) ; get receive count from table
bra.s @exit ; and exit
@rcvADB add.w d1,rcvHdrCnt(a2) ; total header bytes = 4 + ADB data
clr.w rcvDataCnt(a2) ; not used
bclr.b #openData,flags(a2) ; this is not an open ended data packet (readPram, read6805)
bra.s @exit
@rcvExt move.w pbByteCnt(a0),rcvDataCnt(a2) ; set up received data byte count
move.l pbBufPtr(a0),rcvDataPtr(a2) ; set up received data buffer ptr
bset.b #openData,flags(a2) ; this is an open ended data packet (readPram, read6805)
@exit move.l a0,curPb(a2) ; set up current param block
movea.l (sp)+,a1 ; restore a1
rts
;_______________________________________________________________________
;
; Routine: CheckPacketPatch
; a0 = pointer to parameter block
; Exit: z = 1 if packet type within bounds
; z ­ 1 if packet type not within bounds
;_______________________________________________________________________
CheckCudaPacket
moveq #0,d0 ; pre clear the register <17>rbm
move.b pbCmdType(a0),d0 ; get the command byte <17>rbm
beq.s @okExit ; if it is an ADB command, continue <17>rbm
cmp.w #DoContinueProc,d0 ; is this one of the special packets? <17>rbm
blt.s @notSpecial ; no, error <17>rbm
@OkExit
move.w #0,pbResult(a0) ; no error returned in parameter block <17>rbm
rts ; <17>rbm
@notSpecial
cmp.w #pseudoPkt,d0 ; is it a standard packet <17>rbm
bne.s @BadExit ; yes, do it <17>rbm
cmp.b #MaxPseudoCmd,pbCmd(a0) ; is it a valid pseudo command? <17>rbm
bls.s @OkExit ; yes <17>rbm
move.w #InvPseudo,pbParam(a0) ; report a pseudo command error
bra.s @errorExit
@BadExit
move.w #InvPkt,pbParam(a0) ; report invalid packet type <17>rbm
@errorExit
move.w pbCmdType(a0),pbParam+2(a0) ; we are faking an error packet <17>rbm
move.w #paramErr,pbResult(a0) ; parameter error in result field <17>rbm
rts
;________________________________________________________________________________________________
; Routine: CudaTickHandler 9566
;
; Function: This is the completion routine for tick response packets.
;
; Inputs: d0 - number of bytes in response packet
; a1 - pointer to status flag
; a2 - ptr to globals
; (sp) - points to response packet
;
; Outputs: none
;
; Destroys: ???
;
; This routine is from the Regatta Patches file PatchIIciROM.a
;----------------------------------------------------------------------------------------------------
; This patch fixes a bug in Egret Manager TickHandler routine. <89><101>
; The routine will store the 32 bit time passed by Egret to the
; system if the packet is a ReadRealTime into TIME lowmen.
; Decrements the lowmem Time by one to compensate for the interrupt
; Handler incrementing it by one and then calls the LVL1DT interrupt
; handler.
; If the packet is a tick packet then it calls LVL1DT to increment the
; time setting and check the alarm state.
;
; Entry:
; A1.l = Points at Response data buffer At Flags byte:
;
; +---------+----------+---------+---------+---------//-------+
; | Attn | Pkt Type | Flags | Pkt Cmd | 8 Bytes data Max |
; +---------+----------+---------+---------+---------//-------+
;
; A2.l = Points at Egret Manager Globals
;
;----------------------------------------------------------------------------------------------------
;________________________________________________________________________________________________
CudaTickHandler
WITH respPacket,EgretGlobals ; {
subq.l #2,a1 ; point to the beginning of the Response data buffer
cmpi.b #TickPkt,RespType(a1) ; Check the Packet type
beq.s @CallLVL1DT ; If tick packet just call LVL1DT handler
;
; The packet was a readTime packet from Egret. Update the Time lowmem and
; adjust it to compensate for the increment in the LVL1DT handler.
;
move.l RespData(a1),Time ; write the new time in lowmem TIME
subq.l #1,Time ; adjust to compensate for increment in LVL1DT
;
; JUMP to routine pointed to by the Contents of LVL1DT
;
@CallLVL1DT
move.l VIA,a1 ; point to the VIA
move.l LVL1DT,a0 ; get vector
eieioSTP
jmp (a0)
eieioSTP
ENDWITH ; }
;=========================================================================
; Routine: CudaInit 9584
;
; This routine sends a NOP/WarmStart command to Cuda. This routine is
; called early during rom Startup to stop autopoll and 1 sec irq. Also,
; the routine will issue a Send DFAC command to Cuda to initialize the
; the DFAC hardware to a known state. The routine does not use ANY
; memory it is register driven only.
;
; Inputs: NONE
;
; Outputs: NONE
;
; Destroys: D0, D1, D2, D3, A1, A5, A6, A4 (Egret 2 implementation)
; Destroys: D0, D3, A2, A5, A6 (Egret 3 implementation)
;
; NOTE: This routine is called via a BSR6 and returns via a RTS6
;-------------------------------------------------------------------------
;
; The following sequence synchronizes Cuda to the system by disabling all asynchronous transaction
; sources (Auto Poll Data, RTC & Power Messages) and insures that no data (full or partial byte)
; is pending in the VIA data shift register. ByteAck is asserted with TIP negated. Cuda responds
; by asserting TReq and sends a byte to generate a VIA shift register interrupt. After the
; interrupt occurs, ByteAck is negated. Cuda responds by negating TReq and then delays 25µS prior
; to sending an idle acknowledge. The VIA shift register interrupt must be cleared within 25µS of
; the negation of TReq by Cuda. Once the idle acknowledge interrupt occurs, the VIA shift register
; interrupt is cleared and Cuda is ready to accept commands. No collisions should be possible
; until an asynchronous transaction source is enabled.
; ___________________________________________________________
; ___ |
; TIP __|........................................................
; _______ ___________________________
; | | |
; ByteAck __| |_______________________|
; ___________________________________________________________
; ________ |||||||| ||||||||
; ViaClk |||||||| ||||||||
; ___________________________________________________________
;
; ViaData ...........................................................
; _____ _______ ______
; | | sync | | idle |
; VIA_IRQ _____|_____________________| ack |___________| ack |____
; ___________________________________ __________________ ____
; _____ | |
; ViaRD | |
; ___________ ________________________
; ____ | |
; TREQ ___________|______________________|
;
;-------------------------------------------------------------------------
CudaInit
movea.l DecoderInfo.VIA1Addr(a0),a2 ; get VIA 1 base address <SM3> <SM9>
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction <SM3>
(1<<vByteAck)),vBufB(a2) ; and set idle state <SM3> <SM9>
nop
eieioSTP
move.l #hw4msDelay,d4 ; we want to delay 4 millisecs for ADB reset to complete <SM3>
@killtime
eieioSTP
tst.b vBufB(a2) ; <SM3> <SM9>
eieioSTP
dbra d4,@killtime ; <SM3>
eieioSTP
btst.b #TReq,vBufB(a2) ; is Cuda starting a transaction??? <SM3> <SM9>
eieioSTP
bne.s @noX ; no, then continue with SyncAck <SM3>
move.l #hw4msDelay,d4 ; we want to delay 4 millisecs for ADB reset to complete <SM3>
@asyncByte
eieioSTP
btst.b #ifSR,vIFR(a2) ; else, wait for that lil' interrupt to occur <SM3> <SM9>
eieioSTP
bne.s @noX ; <SM3>
dbra d4,@asyncByte ; <SM3>
@noX
eieioSTP
tst.b vSR(a2) ; clear the pending interrupt <SM9>
nop
eieioSTP
move.l #hw10msDelay,d4 ; Timeout values must exceed duration of maximum ADB auto poll. <7>
eieioSTP
bclr.b #vByteAck,vBufB(a2) ; issue a sync state (TIP = negated, ByteAck = asserted) <SM9>
nop
eieioSTP
@waitSync
eieioSTP
btst.b #TReq,vBufB(a2) ; wait for sync acknowledge <SM9>
eieioSTP
beq.s @syncAck ;
dbra.w d4,@waitSync ;
bra.l DeadCuda ; go play death chimes
@syncAck move.l #hw10msDelay,d4 ; number of retries before giving up with Cuda
@wSyncIrq
eieioSTP
btst.b #ifSR,vIFR(a2) ; wait for sync acknowledge interrupt <SM9>
eieioSTP
bne.s @haveSync ;
dbra.w d4,@wSyncIrq ;
@haveSync move.l #hw10msDelay,d4 ; number of retries before giving up with Cuda
eieioSTP
bset.b #vByteAck,vBufB(a2) ; terminate the sync cycle <SM9>
nop
eieioSTP
@syncTerm
eieioSTP
btst.b #TReq,vBufB(a2) ; wait for sync termination acknowledge <SM9>
eieioSTP
bne.s @haveTerm ;
dbra.w d4,@syncTerm ;
bra.l DeadCuda ; go play death chimes
@haveTerm
eieioSTP
tst.b vSR(a2) ; clear the pending interrupt <SM9>
nop
eieioSTP
move.l #hw10msDelay,d4 ; number of retries before giving up with Cuda
@waitIdle2
eieioSTP
btst.b #ifSR,vIFR(a2) ; wait for sync termination acknowledge <SM9>
eieioSTP
bne.w @haveIdle ;
dbra.w d4,@waitIdle2 ;
bra.l DeadCuda ; go play death chimes
@haveIdle ;
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a2) ; and set idle state <SM9>
nop
eieioSTP
tst.b vSR(a2) ; clear the pending interrupt <SM9>
nop
eieioSTP
@exit
rts6 ; setup the return to caller of CudaInit
eject
************************************************************************************************************
* SendCudaCmd 9630: This register based routine will send up to four bytes of data to
* Cuda. The packet type, command, byte count and data are passed in
* registers. The routine will return with d0.w = $0000 if it sent the
* command successfully. A value of $FFFF signifies that the command did
* not get through. The system and Cuda hung and the system aborted the
* transaction.
*
* WARNING: This routine will not error check the transaction requested. It is the
* WARNING: responsibility of the caller to make sure that the packet type, command,
* WARNING: data and data byte count are valid for the transaction requested. Failure
* WARNING: to follow the rules will make this routine fail and CRASH the system.
*
* Input:
* a0.l Pointer to Base address table
*
* d0.l = High word PACKET Command
* Low word PACKET Type
*
* d1.l = Up to four bytes of data to send
* Long word data byte assigment = byte 4, byte 3, byte 2, byte 1
* Byte 1 sent out first
*
* d2.l = Byte count to send. (0-4 bytes)
* Byte count > 4 will send four bytes only
*
* Output: d0.w $0000 if call succeeded, Nonzero if failed
*
* d1.l high word = flags, low word packet type returned by Cuda
*
* Destroys: D2.l, D3.l, D4.l, A5.l, A4.l, A1.l
*
************************************************************************************************************
SendCudaCmd
movea.l DecoderInfo.VIA1Addr(a0),a1 ; get VIA 1 base address
move.l #((MaxTout<<16) OR MaxRetries),d4 ; number of retries before giving up with Cuda
eieioSTP
btst.b #TIP,vBufB(a1) ; check for a transaction in progress
eieioSTP
bne.s @AllOK
@Timeout
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a1) ; and set idle state
nop
eieioSTP
@WaitIdle
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for idle state acknowledgement
eieioSTP
beq.s @WaitIdle ;
eieioSTP
tst.b vSR(a1) ; clear the idle acknowledge interrupt
nop
eieioSTP
@AllOK swap.w d4 ; timeout in low word of d4 Retry count in high word
eieioSTP
btst.b #TReq,vBufB(a1) ; check for a transaction request from Cuda
eieioSTP
beq.l IrqMissed ; MIssed Vsr Irq because of INITVIAS
bsr5 @SendPtype ; send the packet type
beq.l RealAbort ; Discard Aborting transaction
;
; If not abort transaction in progress then send the command byte
;
swap d0
bsr5 sendByte1 ; send the command byte
;
; Now send number of bytes contained in d1 based on
; byte count contained in d2.w
;
move.l d1,d0 ; get the data to send
subq #1,d2 ; adjust for DBRA
cmp.w #3,d2 ; if count out of range quit
bhi.s @EndCmd ; if count valid then adjust for dbra
@sendloop bsr5 sendByte1
lsr.l #8,d0 ; move data byte to low byte of register
@loopEntry dbra d2,@sendloop ; decrement byte count
;
; Wait for the response packet header
;
@EndCmd
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift in
nop
eieioSTP
ori.b #((1<<TIP)|\ ; terminate command packet transaction
(1<<vByteAck)),vBufB(a1) ;
nop
eieioSTP
;
; Now receive the Standard Response packet Header
;
bsr5 readAttn ; get the Attention byte
eieioSTP
bclr.b #TIP,vBufB(a1) ; start the response transaction
nop
eieioSTP
bsr5 readByte ; get the packet type
and #$00FF,d0 ; keep low byte only
swap d0 ; save the packet type
bsr5 readByte ; get the flags byte
and.w #$00FF,d0 ; keep low byte only
swap d0 ; keep the flags byte as an error code
exg d0,d1 ; save the packet type and flags returned
bsr5 readByte ; get the command
eieioSTP
ori.b #((1<<TIP)|\ ; terminate command packet transaction
(1<<vByteAck)),vBufB(a1) ;
nop
eieioSTP
@WaitIdle1
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for idle state acknowledgement
nop
eieioSTP
beq.s @WaitIdle1 ;
eieioSTP
tst.b vSR(a1) ; clear the idle acknowledge interrupt
nop
eieioSTP
;
; Check for an error packet returned by Cuda
;
move.l d1,d0 ; save the packet type and flags
cmp.b #errorpkt,d0 ; check for error packet
beq.s @exit ; error pkt then just exit
sub.w d0,d0 ; zero for success
@exit
rts6
;--------------------------------------------------------------------------
@SendPtype
eieioSTP
bset.b #SRdir,vACR(a1) ; shift out
nop
eieioSTP
btst.b #TReq,vBufB(a1) ; check for abort
eieioSTP
beq.w AbortReq ; go away if abort requested
eieioSTP
move.b d0,vSR(a1) ; load byte into shift reg
nop
eieioSTP
bclr.b #TIP,vBufB(a1) ; TIP indicates shift reg is full on 1st byte
nop
eieioSTP
;
; Check Vsr Irq until timeout. If timeout then check the retry count
; and Call Death Chimes if Retry count exausted.
;
@PollDelay bsr.l otherDelay
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
bne.w VsrIrq ; Go service Shift register Irq
dbra.w d4,@PollDelay ; try again if timed out
move.w #MaxTout,d4 ; Reset the Timeout
swap.w d4 ; get the Retry count
subq.w #1,d4 ; Try again if Retry count not Exausted
bne.s @Timeout
DeadCuda
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a1) ; and set idle state
nop
eieioSTP
move.l #ErrCudaInit,d7 ; Cuda failed, zero high byte flags <SM7>
move.l #0001,d6 ; d6.l must be nonzero
bra.s *
VsrIrq
move.l d4,-(sp)
move $d00,d4
divu #10,d4
dbra.w d4,*
move.l (sp)+,d4
eieioSTP
tst.b vSR(a1) ; clear the interrupt
nop
eieioSTP
btst.b #TReq,vBufB(a1) ; exit with abort status
nop
eieioSTP
AbortReq rts5
;--------------------------------------------------------------------------
; DumpAbort 9774 This routine will read all the data for an abort transaction and
; discard it. When done it will jump back to SendNopCmd entry point
; to retry our command. This command will eventually complete...
Export RealAbort
RealAbort
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift in <rbm>
nop
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a1) ; and set idle state
nop
eieioSTP
WAbortAck bsr.l otherDelay
btst.b #ifSR,vIFR(a1) ; wait for acknowledgement of abort cycle
eieioSTP
beq.s WAbortAck ;
tst.b vSR(a1) ; clear the pending interrupt
nop
eieioSTP
bra.s StartRPkt ; and go start the response transaction
;
; It may be possible to miss a VIA interrupt when the system is restarted because
; a transaction may have been in process when the restart occurred. During restart,
; the VIA is initialized and will result in the loss of any interrupt status. Cuda
; will complete transmission of the attention byte within 100µS of asserting TReq
; (65µS nominal). By delaying 100µS we can assume that the attention byte interrupt
; has occurred.
;
Export IrqMissed
IrqMissed
bsr5 Delay100us ; Let Cuda see SysSes. ³ 125µsec
eieioSTP
bclr.b #SRdir,vACR(a1) ; shift in
nop
eieioSTP
StartRPkt
eieioSTP
tst.b vSR(a1) ; discard the byte
nop
eieioSTP
bclr.b #TIP,vBufB(a1) ; start the response transaction
nop
eieioSTP
DumpAbort
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s DumpAbort
eieioSTP
tst.b vSR(a1) ; discard the byte
nop
eieioSTP
btst.b #TReq,vBufB(a1) ; check for last byte
eieioSTP
bne.s DumpDone ; Clock Tick Packets only 2 bytes
eieioSTP
eori.b #1<<vByteAck,vBufB(a1) ; acknowlege byte
nop
eieioSTP
bra.s DumpAbort ; and loop for next byte
;
; Last byte was read, terminate the transaction with the idle state in the
; communications protocol. Then, wait for an idle state acknowledge before
; returning from the transaction.
; _________________________
; ___ |
; TIP _________________________________|
; ________________ ________________ _________________________
; _______ | |
; ByteAck ________________|________________|
; ___________________________________________________________
; ________ |||||||| |||||||| ||||||||
; ViaClk |||||||| |||||||| ||||||||
; ___________________________________________________________
; XXXXXXXX XXXXXXXX |
; ViaData _____XXXXXXXX________XXXXXXXX___|
;
; | |<-Last Byte |<-Idle Acknowledge
; VIA_IRQ ____________|_______________|_______________|______________
; ________________________________________
; ____ |
; TREQ __________________|
;
DumpDone
eieioSTP
ori.b #((1<<TIP)| \ ; terminate transaction
(1<<vByteAck)),vBufB(a1) ; and set idle state
nop
eieioSTP
@WaitIdleAck
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for idle state acknowledge
eieioSTP
beq.s @WaitIdleAck ;
eieioSTP
tst.b vSR(a1) ; discard the byte
nop
eieioSTP
bra.w SendCudaCmd ; go try sending our command again
;--------------------------------------------------------------------------
; Export sendByte1
; inputs: d0.b data byte to send to Cuda.
; trashes: d0.b
sendByte1
eieioSTP
bset.b #SRdir,vACR(a1) ; shift out
nop
eieioSTP
move.b d0,vSR(a1) ; load byte into shift reg
nop
eieioSTP
eori.b #1<<vByteAck,vBufB(a1) ; indicate byte pending in VIA
nop
eieioSTP
@poll bsr.l otherDelay
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s @poll
move.l d0,-(sp)
move $d00,d0
divu #10,d0
dbra.w d0,*
move.l (sp)+,d0
eieioSTP
tst.b vSR(a1) ; clear the interrupt
nop
eieioSTP
rts5
;--------------------------------------------------------------------------
; Export readByte
readByte
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s readByte
eieioSTP
move.b vSR(a1),d0 ; read the byte
nop
eieioSTP
eori.b #1<<vByteAck,vBufB(a1) ; and acknowledge it
nop
eieioSTP
rts5
;--------------------------------------------------------------------------
; Export readAttn
readAttn
bsr.l otherDelay
eieioSTP
btst.b #ifSR,vIFR(a1) ; wait for shift to complete
eieioSTP
beq.s readAttn
eieioSTP
tst.b vSR(a1) ; clear the interrupt
nop
eieioSTP
rts5
;--------------------------------------------------------------------------
; Export delay100us
delay100us
move.w #DelayCnt,d3
eieioSTP
@wait
eieioSTP
tst.b (a1) ; sync to VIA clock
eieioSTP
dbra d3,@wait ; delay at least 100 us (very rough)
rts5
;--------------------------------------------------------------------------
otherDelay
move.l d0,-(sp)
move $d00,d0
lsr #6,d0
dbra.w d0,*
move.l (sp)+,d0
rts
ENDPROC ; EndProc for CudaMgr }
END;---------------- <H2>
Reference in New Issue View Git Blame Copy Permalink