Sense codes for displays like the 12 inch RGB display (512x384) weren't working since they had the extended part set to 0xff.
Related to issues #25.
Also added some descriptive information and sizes which may be used for UI purposes such as creating a menu of displays to choose from. The sizes may be used to set the default window size for the display.
This commit fixes conflict resolution mistakes in the following commits:
"atimach64gx: Let crtc_update calculate fb_ptr."
"atimach64gx: Redraw only when necessary."
"atimach64gx: Log unhandled overlay registers." was mistakenly included in "atimach64gx: Let crtc_update calculate fb_ptr.". The OVR_ registers were included because they may be needed for 2D acceleration in System 7.5.3 and later.
Init them to defaults.
Make CONFIG_CNTL 8 bytes so unaligned read/write is easier.
Write changes to CONFIG_CNTL even if offset + size is > 4.
Log aperture change only if first byte (LSB) of CONFIG_CNTL is written. The driver might only write to the 2 most significant bytes which won't affect aperture size.
Offset and size are applied to the destination, not to source value, so we shouldn't use extract_bits when logging value.
Use ATI bitfield enums in switch statement.
Allow VRAM presence only in optional bank.
control: Implement banks.
The BAR is 64MB.
The little-endian/big-endian ranges repeat every 16MB.
An endian range can be addressed in d128 (wide) mode or d64 mode.
In d128 mode, there is a 4MB range followed by an undefined 4MB range. bytes 0..7 belong to the standard bank and bytes 8..15 belong to the optional bank.
In d64 mode:
- 2MB mirror ranges at 0MB and 2MB (both have the same read/write behavor: write to both banks or read from the standard bank.
- 2MB standard bank rage at 4MB.
- 2MB optional bank range at 6MB.
- Read 8 bytes at a time instead of just 1.
- Remove multiply operations from loop. We just need increments or additions.
- Change compares with int to compares with zero.
CUR_HORZ_OFF becomes non-zero when the cursor needs to be drawn to the left of the left edge of the frame buffer.
CUR_VERT_OFF is handled differently. When CUR_VERT_OFF is non-zero, CUR_OFFSET is changed to point to the first line of the cursor that will be drawn, so CUR_VERT_OFF is the number of lines to remove from the total height of the cursor.
Alternatively, we could handle CUR_VERT_OFF the same way as CUR_HORZ_OFF by leaving the cursor height constant, drawing the cursor starting from the CUR_VERT_OFF line, and adjusting cursor Y position by negative CUR_VERT_OFF.
- Read 8 bytes at a time instead of just 1.
- Remove multiply operations from loop. We just need increments or additions.
- Change compares with int to compares with zero.
CUR_HORZ_OFF becomes non-zero when the cursor needs to be drawn to the left of the left edge of the frame buffer.
CUR_VERT_OFF is handled differently. When CUR_VERT_OFF is non-zero, CUR_OFFSET is changed to point to the first line of the cursor that will be drawn, so CUR_VERT_OFF is the number of lines to remove from the total height of the cursor.
Alternatively, we could handle CUR_VERT_OFF the same way as CUR_HORZ_OFF by leaving the cursor height constant, drawing the cursor starting from the CUR_VERT_OFF line, and adjusting cursor Y position by negative CUR_VERT_OFF.
