This method is used by both pci_io_read and pci_io_write to determine if ISA type I/O access is allowed.
The SPARSE_IO_BASE I/O address is defined. This I/O range is not defined by an I/O BAR.
- Add IOBusDevice (nvram_addr_hi_dev) for NVRAM addr hi.
- Add IOBusDevice (nvram_dev) for NVRAM data.
- Make all IOBusDevices use the same code.
- Log error if 4 least significant bits of offset are not zero.
- Correctly byte swap the value before passing it to the IOBusDevice.
- When reading, duplicate the bytes in a word or dword like a real Power Mac does.
Grackle allows attaching different PCI devices. This change allows attach multiple of the same PCI device. To make the name unique in the machine map, the name of the PCI slot is appended to the device name.
There are cases where when it's necessary (e.g. given uninitialized NVRAM,
the Beige G3 with the 10.2 install CD inserted will update the boot
device and restart to boot from it).
Restart support was done by wrapping the ppc_exec function in a loop and
checking for a restart power off reason. We also need to disconnect all
event listeners, since they will be recreated when the machine is
re-initialized.
Add MPC601 variants. Variants that decrement and test the ctr are invalid bon't don't appear to trigger an exception. The manual says MPC601 can decrement the counter. Other CPUs do not decrement the counter but will branch based on the value.
PDM defaults to 640x480.
If you set --mon_id to MacRGB12in then it would draw 512x384 inside a 640x480 window.
If you set --mon_id to Multiscan20in then it would try to draw 832x624 inside a 640x480 window and crash.
If you set the Monitors control panel to switch multiscan display from 640x480 to 832x624 and restart then it would crash.
Now it will correctly change the window size every time the mode changes.
