2.5 KiB
ROM
The Old World ROM is always 4 megabytes (MB). The first three MB are reserved for the 68k code, while the last MB is for the PowerPC boot-up code.
BMac
The BMac is an ethernet controller.
The max frame size is 0x5EE bytes.
It resides on 0xF3011000, with Writing DMA on 0xF3008200 and Reading DMA on 0xF3008300.
Swim3 is located at 0xF3015000.
Serial
For serial, it replicates the functionality of a Zilog ESCC. There are two different ports - one located at (MacIOBase) + 0x13000 for the printer, and the other at (MacIOBase) + 0x13020 for the modem.
DBDMA
The Description-Based Direct Memory Access relies on memory-based descriptions, minimizing CPU interrupts.
| Channel | Number |
|---|---|
| SCSI0 | 0x0 |
| FLOPPY | 0x1 |
| ETHERNET TRANSMIT | 0x2 |
| ETHERNET RECIEVE | 0x3 |
| SCC TRANSMIT A | 0x4 |
| SCC RECIEVE A | 0x5 |
| SCC TRANSMIT B | 0x6 |
| SCC RECIEVE B | 0x7 |
| AUDIO OUT | 0x8 |
| AUDIO IN | 0x9 |
| SCSI1 | 0xA |
SWIM 3
The SWIM 3 (Sanders-Wozniak integrated machine 3) is the floppy drive disk controller. As can be inferred by the name, the SWIM III chip is the improvement of a combination of floppy disk driver designs by Steve Wozniak (who worked on his own floppy drive controller for early Apple computers) and Wendell B. Sander (who worked on an MFM-compatible IBM floppy drive controller).
The SWIM chip is resided on the logic board. It sits between the I/O controller and the floppy disk connector. Its function is to translate the I/O commands to specialized signals to drive the floppy disk drive, i.e. disk spinning speed, head position, phase sync, etc.
The floppy drives themselves were provided by Sony.
NVRAM
Mac OS relies on 8 KB of NVRAM at minimum to run properly. It's usually found at IOBase (ex.: 0xF3000000 for Power Mac G3 Beige) + 0x60000.
PMU
| Command Name | Number | Functionality |
|---|---|---|
| PMUpMgrADB | 0x20 | Send ADB command |
| PMUpMgrADBoff | 0x21 | |
| PMUxPramWrite | 0x32 | |
| PMUtimeRead | 0x38 | |
| PMUxPramRead | 0x3A | |
| PMUmaskInts | 0x70 | |
| PMUreadINT | 0x78 | |
| PMUPmgrPWRoff | 0x7E | |
| PMUResetCPU | 0xD0 |
Miscellaneous
The Power Mac G3 Beige has an additional register at 0xFF000004, which is dubbed varyingly as the "cpu-id" (by OpenFirmware), the ""systemReg" (display driver) or "MachineID" (platform driver).