mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-12-25 18:29:49 +00:00
83 lines
3.7 KiB
Markdown
83 lines
3.7 KiB
Markdown
# ROM
|
|
|
|
The Old World ROM is always 4 megabytes (MB). The first three MB are reserved for the 68k code, while the last MB is for the PowerPC boot-up code.
|
|
|
|
# Serial
|
|
|
|
For serial, it replicates the functionality of a Zilog ESCC. There are two different ports - one located at (MacIOBase) + 0x13000 for the printer, and the other at (MacIOBase) + 0x13020 for the modem.
|
|
|
|
# DBDMA
|
|
|
|
The Description-Based Direct Memory Access relies on memory-based descriptions, minimizing CPU interrupts.
|
|
|
|
| Channel | Number |
|
|
|:-----------------:|:------:|
|
|
| SCSI0 | 0x0 |
|
|
| FLOPPY | 0x1 |
|
|
| ETHERNET TRANSMIT | 0x2 |
|
|
| ETHERNET RECIEVE | 0x3 |
|
|
| SCC TRANSMIT A | 0x4 |
|
|
| SCC RECIEVE A | 0x5 |
|
|
| SCC TRANSMIT B | 0x6 |
|
|
| SCC RECIEVE B | 0x7 |
|
|
| AUDIO OUT | 0x8 |
|
|
| AUDIO IN | 0x9 |
|
|
| SCSI1 | 0xA |
|
|
|
|
# NCR 53C94
|
|
|
|
The NCR 53C94 is the SCSI controller.
|
|
|
|
# Register Map
|
|
|
|
| Offset | Read functionality |Write functionality |
|
|
|:------:|:------------------------:|:-------------------------:|
|
|
| 0x0 | Transfer counter LSB | Transfer counter LSB |
|
|
| 0x1 | Transfer counter MSB | Transfer counter MSB |
|
|
| 0x2 | FIFO | FIFO |
|
|
| 0x3 | Command | Command |
|
|
| 0x4 | Status | Destination Bus ID |
|
|
| 0x5 | Interrupt | Select/reselect timeout |
|
|
| 0x6 | Sequence step | Synch period |
|
|
| 0x7 | FIFO flags/sequence step | Synch offset |
|
|
| 0x8 | Configuration 1 | Configuration 1 |
|
|
| 0x9 | | Clock conversion factor |
|
|
| 0xA | | Test mode |
|
|
| 0xB | Configuration 2 | Configuration 2 |
|
|
| 0xC | Configuration 3 | Configuration 3 |
|
|
| 0xF | | Reserve FIFO Byte (Cfg 2) |
|
|
|
|
# SWIM 3
|
|
|
|
The SWIM 3 (Sanders-Wozniak integrated machine 3) is the floppy drive disk controller. As can be inferred by the name, the SWIM III chip is the improvement of a combination of floppy disk driver designs by Steve Wozniak (who worked on his own floppy drive controller for early Apple computers) and Wendell B. Sander (who worked on an MFM-compatible IBM floppy drive controller).
|
|
|
|
The SWIM chip is resided on the logic board physically and is located at IOBase + 0x15000 in the device tree. It sits between the I/O controller and the floppy disk connector. Its function is to translate the I/O commands to specialized signals to drive the floppy disk drive, i.e. disk spinning speed, head position, phase sync, etc.
|
|
|
|
Unlike its predecessor, it allowed some DMA capability.
|
|
|
|
The floppy drives themselves were provided by Sony.
|
|
|
|
Some New World Macs do have a SWIM 3 driver present, but this normally goes unused due to no floppy drive being connected.
|
|
|
|
# NVRAM
|
|
|
|
Mac OS relies on 8 KB of NVRAM at minimum to run properly. It's usually found at IOBase (ex.: 0xF3000000 for Power Mac G3 Beige) + 0x60000.
|
|
|
|
# PMU
|
|
|
|
| Command Name | Number | Functionality |
|
|
|:----------------:|:------:|:----------------------------:|
|
|
| PMUpMgrADB | 0x20 | Send ADB command |
|
|
| PMUpMgrADBoff | 0x21 |
|
|
| PMUxPramWrite | 0x32 |
|
|
| PMUtimeRead | 0x38 |
|
|
| PMUxPramRead | 0x3A |
|
|
| PMUmaskInts | 0x70 |
|
|
| PMUreadINT | 0x78 |
|
|
| PMUPmgrPWRoff | 0x7E |
|
|
| PMUResetCPU | 0xD0 |
|
|
|
|
# Miscellaneous
|
|
|
|
The Power Mac G3 Beige has an additional register at 0xFF000004, which is dubbed varyingly as the "cpu-id" (by Open Firmware), the ""systemReg" (display driver) or "MachineID" (platform driver).
|