mirror of
https://github.com/dingusdev/dingusppc.git
synced 2024-12-27 00:29:18 +00:00
24 lines
1.1 KiB
Markdown
24 lines
1.1 KiB
Markdown
## Disabling BAT translation
|
|
|
|
BAT translation can be disabled by invalidating BAT registers. This is somewhat CPU specific.
|
|
MPC601 implements its own format for BAT registers that differs from the PowerPC specification.
|
|
|
|
MPC601-specific lower BAT registers has the "V" bit. If it's cleared, the corresponding BAT pair
|
|
is invalid and won't be used for address translation. To invalidate BATs on MPC601, it's enough
|
|
to write NULL to lower BAT registers. That's exactly what PowerMac 6100 ROM does:
|
|
```
|
|
li r0, 0
|
|
mtspr ibat0l, r0
|
|
mtspr ibat1l, r0
|
|
mtspr ibat2l, r0
|
|
```
|
|
|
|
PowerPC CPUs starting with 603 uses the BAT register format described in the PowerPC specification.
|
|
The upper BAT registers contain two bits: Vs (supervisor state valid bit) and Vp (problem/user state valid bit).
|
|
PowerPC Architecture First Edition from 1993 gives the following code:
|
|
|
|
```BAT_entry_valid = (Vs & ~MSR_PR) | (Vp & MSR_PR)```
|
|
|
|
If neither Vs nor Vp is set, the corresponding BAT pair isn't valid and doesn't participate in address translation.
|
|
To invalidate BATs on non-601, it's sufficient to set the upper BAT register to 0x00000000.
|