forked from Apple-2-HW/TommyPROM
64 lines
1.8 KiB
Markdown
64 lines
1.8 KiB
Markdown
## Hardware Verifier Tool
|
|
This tool allows access to individual control lines from the Arduino to verify that the hardware was assembled correctly.
|
|
|
|
It can be used without a chip installed to scope out address and data lines. It also offers low-level control when the chip is installed.
|
|
|
|
THIS TOOL USES DIRECT PORT ACCESS ON THE ARDUINO. CHECK TO MAKE SURE IT IS
|
|
COMPATIBLE WITH YOUR BOARD BEFORE USING. It will work correctly on the Unu, Nano, and Boarduino. It WILL NOT WORK on the Micro.
|
|
|
|
Note that the comamnds write access to the individual 28C control lines with some exceptions to protect the chip and the host arduino:
|
|
|
|
* When the O command is used to enable chip output, the arduino data bus is set to INPUT
|
|
* When the D command is used to write data from the arduino, the chip output is disabled
|
|
* The R command sets the output enable (OE) on the chip, but not the chip enable (CE)
|
|
* The L and U commands reset CE, OE, and WE back to disabled on completion and change the data and address
|
|
|
|
The session below shows how a write fails to a locked chip and then succeeds once the chip is unlocked.
|
|
|
|
```
|
|
Hardware Verifier - 28C series EEPROM
|
|
|
|
Valid commands are:
|
|
Axxxx - Set address bus to xxxx
|
|
Dxx - Set Data bus to xx
|
|
Cs - Set Chip enable to state (e=enable, d=disable)
|
|
Os - Set Output enable to state (e=enable, d=disable)
|
|
Ws - Set Write enable to state (e=enable, d=disable)
|
|
R - Read and print the value on the data bus
|
|
L - Send Lock sequence to enable device Software Data Protection
|
|
U - Send Unlock sequence to disable device Software Data Protection
|
|
|
|
#l
|
|
Writing the lock code to enable Software Write Protect mode.
|
|
|
|
#a0000
|
|
|
|
#ce
|
|
|
|
#r
|
|
22
|
|
|
|
#d55
|
|
|
|
#we
|
|
|
|
#wd
|
|
|
|
#r
|
|
22
|
|
|
|
#u
|
|
Writing the unlock code to disable Software Write Protect mode.
|
|
|
|
#d33
|
|
|
|
#we
|
|
|
|
#wd
|
|
|
|
#r
|
|
33
|
|
|
|
#cd
|
|
|
|
``` |