Thomas Harte
a321ff3037
Adds some default values.
2019-01-25 20:21:24 -05:00
Thomas Harte
68d6feaa03
Adds missing includes and gets more explicit about exceptions.
2019-01-25 20:19:50 -05:00
Thomas Harte
74e1a9a621
Declines improper use of offset within loops and adds missing header.
2019-01-25 20:14:53 -05:00
Thomas Harte
6a43fc5df0
Resolves a GCC-troubling circular declaration issue vs. atomic.h.
2019-01-25 19:30:39 -05:00
Thomas Harte
312f38906b
Corrects two improper include paths.
2019-01-25 19:19:23 -05:00
Thomas Harte
20b4896940
Eliminates the dead stuff of CRTConstants.hpp.
2019-01-25 19:11:39 -05:00
Thomas Harte
6a93d2d006
Corrects some minor spaces-instead-of-tabs errors.
2019-01-24 22:59:03 -05:00
Thomas Harte
ae0bc7e7aa
Calculates sampling offsets up front.
2019-01-23 20:53:10 -05:00
Thomas Harte
a8acadbe13
Gives the shader builders freer rein over what to use as inputs, and turns angles into a varying.
...
All dropping out during the never-ending diagnosis at play here.
2019-01-22 22:20:12 -05:00
Thomas Harte
727f2e2ba0
Updates to the ScanTarget world.
2019-01-17 22:28:02 -05:00
Thomas Harte
a6683cb9b8
Avoids scaling luminance prior to extracting chrominance.
2019-01-17 20:52:33 -05:00
Thomas Harte
5ceb711bd3
Allows amplitude to be specified even for a default colour burst.
2019-01-17 20:47:42 -05:00
Thomas Harte
d593796dae
Reintroduces less-filtered black and white video where there's no colour burst.
2019-01-16 22:22:29 -05:00
Thomas Harte
ef0dbc2a41
Undoes hard-coding of target framebuffer and display gamma.
2019-01-15 21:33:30 -05:00
Thomas Harte
6c49953115
Returns gamma correction, and corrects Amstrad CPC brightness.
2019-01-14 22:56:08 -05:00
Thomas Harte
55290f4dad
Attempts a fix of frame_was_complete_ logic, to try to eliminate black flashes.
2019-01-14 21:42:45 -05:00
Thomas Harte
bb03d2f2ad
Removes redundant enumeration.
2019-01-13 23:07:50 -05:00
Thomas Harte
7aec5be61a
Cleans up and simplifies shader creation.
2019-01-13 22:49:01 -05:00
Thomas Harte
e89e55a9bb
Attempts to factor actual composite amplitude into output.
2019-01-13 14:45:17 -05:00
Thomas Harte
7c2c243985
Corrects sample spacing, and removes a lot of detritus.
2019-01-12 18:36:54 -05:00
Thomas Harte
25a1f23fc0
Takes a first shot at re[re,re]-implementing composite colour decoding.
2019-01-12 17:59:24 -05:00
Thomas Harte
27541196cc
Corrects Luminance8Phase8 and PhaseLinkedLuminance8 composite encodings.
2019-01-11 22:46:50 -05:00
Thomas Harte
5d9521fcb9
Advances back to a semi-complete monochrome composite output.
...
i.e. composite phase and amplitude is ostensibly flowing to its new destination.
2019-01-11 22:02:15 -05:00
Thomas Harte
028e530232
Shunts output shader to its proper place.
2019-01-06 22:59:14 -05:00
Thomas Harte
906a2ff6eb
Switches to using clock times for buffer merging and output.
2019-01-06 18:47:01 -05:00
Thomas Harte
c392c819c1
Switches to using the announce is_visible flag to spot line ends.
2019-01-06 13:37:34 -05:00
Thomas Harte
e9d9ff0da0
Enhances ScanTarget to provide additional timing information.
2019-01-05 23:09:17 -05:00
Thomas Harte
46d756d298
Starts towards a flattening of the intermediate video processing.
...
Immediate issue: using x position to index into a bitmap sampled at the input data rate doesn't allow for the disconnection between input rate and output speed provided by the flywheels.
2019-01-05 18:11:39 -05:00
Thomas Harte
fd0ffc7085
Attempts an initial flattening of the pipeline, seemingly losing all output.
2019-01-01 21:02:21 -05:00
Thomas Harte
557a2a0ddf
Moves pipeline setup into draw(), where there'll definitely be an OpenGL context.
2018-11-29 19:41:54 -08:00
Thomas Harte
6be46ae921
Mostly restores Atari 2600 output. PAL colours need work.
2018-11-29 18:26:05 -08:00
Thomas Harte
a25470ee41
Permits tweaking of PhaseLinkedLuminance8 sampling offset.
2018-11-29 16:29:28 -08:00
Thomas Harte
fd579a019b
Introduces a new scan source data type, motivated by the reasoning used by the Oric.
...
Specifically: it'll allow PCM sampling of the potentially arbitrary composite generation logic of various machines.
2018-11-28 20:40:22 -08:00
Thomas Harte
64465f97b6
Starts towards reintroducing the proper mechanisms for selecting a display type at runtime.
2018-11-28 17:53:33 -08:00
Thomas Harte
d45c2a1f28
Settles, at least for now, on 15-tap notch filtering.
2018-11-26 22:34:31 -05:00
Thomas Harte
f3174069fa
Attempts a linear comb filter for YC separation, plus post-separation Y filtering.
2018-11-25 21:54:12 -05:00
Thomas Harte
cd1e796093
Attempts to add clearing of the destination framebuffer too.
2018-11-24 23:31:56 -05:00
Thomas Harte
dd4af4f0df
Removes dead files.
2018-11-24 22:40:06 -05:00
Thomas Harte
76656fab23
Applies harsher filtering.
2018-11-24 22:39:53 -05:00
Thomas Harte
cf49603a9e
Makes first reintroduction of colour composite decoding.
2018-11-24 22:30:39 -05:00
Thomas Harte
6c92853461
Corrects monochrome composite generation.
2018-11-24 21:55:15 -05:00
Thomas Harte
6a62cf9146
Corrects shader generation for S-Video input to S-Video output.
2018-11-24 21:40:34 -05:00
Thomas Harte
4fa6bc0ad1
Corrects S-Video decoding for most machines.
...
Ironically, that being those other than luminance/chrominance input machines. Further investigation required.
2018-11-24 21:30:09 -05:00
Thomas Harte
95685749ad
Attempts fully to implement the S-Video pipeline, without success.
2018-11-24 18:51:07 -05:00
Thomas Harte
d7c0f0c804
Switches to an ordinary sampler for scan processing.
2018-11-24 18:03:44 -05:00
Thomas Harte
6b42b92930
Kills CRTOpenGL.cpp and simplifies shader output very slightly.
2018-11-24 17:37:58 -05:00
Thomas Harte
538c57664f
Establishes attribute bindings to allow multiple shaders to use the same vertex array.
2018-11-24 16:06:26 -05:00
Thomas Harte
a66a20f7fe
Manages to get a brilliant white out of the new pipeline.
2018-11-23 22:54:52 -05:00
Thomas Harte
d4ac79b0af
Attempts to introduce a full-on processing pipeline, in theory putting me two shaders away from completion.
...
Well, subject to finding the last flashing bug and updating the multimachine, anyway.
2018-11-23 22:34:38 -05:00
Thomas Harte
a5a3769a0f
Reaches for conceptual const correctness.
2018-11-23 22:33:28 -05:00
Thomas Harte
ee89be6730
Removes many stray spaces.
2018-11-23 22:32:32 -05:00
Thomas Harte
b9aca39eb0
Reintroduces Vic-20 output.
...
Resolving errors in shader generation while I'm here.
2018-11-22 22:43:42 -05:00
Thomas Harte
c0454ff101
Corrects chrominance scale.
2018-11-22 18:18:16 -05:00
Thomas Harte
a697a2e4f6
Attempts to complete all input processing — an RGB, S-Video or composite input buffer is now produced.
...
... for all input data types.
2018-11-22 17:20:31 -05:00
Thomas Harte
396cf72029
Renames OutputType as DisplayType and promotes it to a scan target modal.
2018-11-22 14:36:46 -05:00
Thomas Harte
bfe9704829
Reintroduces respect of each machine's nominated visible area.
2018-11-22 13:22:04 -05:00
Thomas Harte
43ee540233
Avoids race condition on .is_first_in_frame
2018-11-21 18:27:04 -05:00
Thomas Harte
38ffc4fdb3
Invalidates the stencil buffer upon buffer resizes.
2018-11-20 19:51:11 -05:00
Thomas Harte
a70991d50e
Eliminates minor gap.
2018-11-19 23:35:12 -05:00
Thomas Harte
4c00456166
Makes first attempt to draw only new lines.
2018-11-19 23:25:26 -05:00
Thomas Harte
26219213d7
Marginally increases scan size.
2018-11-18 23:03:56 -05:00
Thomas Harte
97c5ee6c0a
Corrects stencil buffer creation, and edges towards using it for [guaranteed] full-screen decay.
2018-11-18 22:22:43 -05:00
Thomas Harte
75bc0e451d
Reintroduces the accumulation texture.
...
Disables automatic clearing of the texture target, as the profiler indicates the vector instantiation to be a huge time sink.
2018-11-18 21:39:11 -05:00
Thomas Harte
6496b6313c
Attempts to fix random stray noise lines.
2018-11-17 23:27:25 -05:00
Thomas Harte
8f05560dd7
Corrects right-edge bookending.
2018-11-17 17:46:57 -05:00
Thomas Harte
06c0c64c1a
Shifts intermediate buffer sampling into the middle of each pixel row.
2018-11-17 17:31:32 -05:00
Thomas Harte
c173777d12
Extends TextureTarget so that targets can be created with a one-bit stencil.
2018-11-17 15:51:12 -05:00
Thomas Harte
16dfeb3fc8
Discards empty lines, yet makes some attempt at restoring transparency.
...
The two things conflict more than a little, so work to do.
2018-11-15 21:51:27 -05:00
Thomas Harte
5a31891048
Returns Amstrad CPC output.
...
Which is probably it until I get some more composite processing back in.
2018-11-15 21:32:22 -05:00
Thomas Harte
8b37496447
Restores video output to the Master System.
2018-11-15 21:21:54 -05:00
Thomas Harte
8f6664f0d7
Starts towards picking an input shader based on data type and pipeline.
2018-11-15 21:02:46 -05:00
Thomas Harte
8a699b6072
Kills setup_output definitively, saving some indirection. set_scan_target takes its place.
2018-11-14 21:52:57 -05:00
Thomas Harte
87df8b9e85
Makes an attempt at pre-emptive line buffer clearing.
2018-11-14 21:19:14 -05:00
Thomas Harte
91b19c5c70
Adds bookending, and finally kills the TextureBuilder. Farewell.
2018-11-14 20:49:06 -05:00
Thomas Harte
0487580a1a
Corrects initial state of is_drawing_ and expands lines to full display.
2018-11-14 20:10:38 -05:00
Thomas Harte
3dca836571
Ensures no overflow, and adds a couple of consts.
2018-11-14 20:09:57 -05:00
Thomas Harte
6ba02c44d0
Better binds buffer sizes.
2018-11-13 23:08:51 -05:00
Thomas Harte
bf3ab4e260
Proceeds as drawing to the unprocessed line buffer and drawing from it.
...
Very, very slowly, and without yet clearing.
2018-11-13 21:15:33 -05:00
Thomas Harte
02f9cada43
Communicates the colour subcarrier frequency, and uses it to pick a buffer width.
2018-11-13 18:33:44 -05:00
Thomas Harte
654a19ea15
Switches back to working on the scan shaders.
...
Pixels from the emulated machine are now starting to appear.
2018-11-12 22:52:26 -05:00
Thomas Harte
ecb5504bd1
Switches enable_vertex_attribute_with_pointer to silent failure (versus glGetError).
2018-11-12 22:51:44 -05:00
Thomas Harte
2adf3d353e
Subtracts retrace periods from output scale.
2018-11-12 20:20:09 -05:00
Thomas Harte
3045e85004
Ensures redraws when resizing; declines to busy wait otherwise.
2018-11-12 20:15:38 -05:00
Thomas Harte
e9d1afd515
Appears to demonstrates that the line buffer is approximately working.
2018-11-12 19:10:48 -05:00
Thomas Harte
833ab7945b
Slow steps towards switching to line output.
2018-11-12 18:56:54 -05:00
Thomas Harte
0af1d668a6
Takes a first step towards generality, and thereby starts submitting lines.
2018-11-12 18:47:55 -05:00
Thomas Harte
0ac62e3805
Flips and properly sizes output scans.
2018-11-12 18:28:09 -05:00
Thomas Harte
938d09f34a
Corrects scan outline generation.
2018-11-12 18:23:45 -05:00
Thomas Harte
dce52d740d
Finally gets some pixels back on screen.
...
For now, just the raw scans, direct to the framebuffer, with no intermediate processing. But it seems to prove that at least some of the proper data is reaching the GPU.
2018-11-11 23:23:42 -05:00
Thomas Harte
3ae333fa84
Edges further towards reviving the shaders.
2018-11-11 21:41:13 -05:00
Thomas Harte
d5af1f3948
Removes some migrated work.
2018-11-11 16:22:14 -05:00
Thomas Harte
0ba3ae53ab
Connects up the necessary recording to use intermediate composite buffers.
2018-11-11 15:20:18 -05:00
Thomas Harte
be12d78c83
Corrects vertical event announcement, and adjusts namespaces for OpenGL primitives.
2018-11-11 15:11:32 -05:00
Thomas Harte
b70227ac1b
Ensures proper write area locations end up in the scans.
2018-11-10 21:10:33 -05:00
Thomas Harte
6d277fecd5
Makes ScanTarget a little more communicative and orthogonal.
2018-11-10 19:52:57 -05:00
Thomas Harte
491817d85c
Corrects allocation error and begins submitting raw textures.
2018-11-08 23:02:36 -05:00
Thomas Harte
20faf4e477
Adds submission of scans to the GPU.
2018-11-08 22:21:11 -05:00
Thomas Harte
4fe5c7c24e
Conspires to handle multithreading side of things in a lockless fashion.
...
At least on x86-64.
2018-11-08 21:57:28 -05:00
Thomas Harte
36bf640c6f
Acts as if it is going to submit scans, at least.
2018-11-07 22:53:46 -05:00
Thomas Harte
7881e40e0b
Shuffles the OpenGL primitives into their own collection.
2018-11-07 19:11:01 -05:00
Thomas Harte
55da1e9c0f
Simplifies semantics a little and starts accepting a single buffer of pixel data.
2018-11-06 22:23:38 -05:00
Thomas Harte
9799aa0975
Completes documentation and rounds out implementation.
2018-11-04 22:17:33 -05:00
Thomas Harte
1effb97b74
Reintroduces colour phase acquisition from the colour burst.
2018-11-04 21:57:46 -05:00
Thomas Harte
eb28095041
Ensures proper accumulation and reporting of colour phase across lines.
2018-11-04 21:44:22 -05:00
Thomas Harte
014da41471
Ensures scan positions are communicated with a specified range, and switches manner of pixel clock communication.
2018-11-04 21:06:25 -05:00
Thomas Harte
0446e350d3
Resolves sizing of texture coordinates, and improves constness slightly.
2018-11-03 23:51:26 -04:00
Thomas Harte
05fb7db147
Reduces CRT chattiness.
2018-11-03 23:47:41 -04:00
Thomas Harte
f6562de325
Possibly adds enough for the Electron and ZX80 to start outputting dummy lines.
...
Let's see!
2018-11-03 23:40:39 -04:00
Thomas Harte
b40211d2c0
Starts to bend 'CRTMachine' to a world farther from owning the GPU relationship.
2018-11-03 21:54:25 -04:00
Thomas Harte
da4d883321
Adds first, incomplete attempts to talk to a ScanTarget from the CRT.
...
Does away with the hassle of `unsigned` while I'm here; that was a schoolboy error.
2018-11-03 19:58:44 -04:00
Thomas Harte
373820f080
Attempts to establish interface to decouple scan output from generation.
...
Restores some functionality that had dropped out in the interim: diagonal scans, decoupling of scan scaling from timing of the composite subcarrier.
2018-10-30 21:50:35 -04:00
Thomas Harte
4701aa149a
Adds first draft of an interface to separate CRT logic from the GPU-side stuff.
2018-10-29 22:08:17 -04:00
Thomas Harte
7eeefd2602
Ensures LOGs look like statements even in release builds.
2018-10-22 22:37:11 -04:00
Thomas Harte
7c65cfd932
Adds default values for WriteArea.
2018-10-21 21:18:54 -04:00
Thomas Harte
e582b4c8ca
Eliminates some dangling references to iCoordinate.
2018-09-13 19:35:15 -04:00
Thomas Harte
a7508bc2ae
Switching explicitly to one pixel per sample eliminates the need for a bookender.
2018-09-12 20:11:17 -04:00
Thomas Harte
a38639d099
Eliminates the concept of an iCoordinate.
...
Real-life precision appears not to support the idea of sub-sample pixel storage.
2018-09-12 20:05:39 -04:00
Thomas Harte
d73d3b4480
Adds a left border to complement the right.
2018-09-09 21:52:48 -04:00
Thomas Harte
6e9cd5cb21
Resolves over-brightness created by over-composition.
2018-09-09 20:30:43 -04:00
Thomas Harte
c73445199c
Eliminates a couple of instances of manual memory management.
2018-09-09 20:29:58 -04:00
Thomas Harte
4c8781c762
Increases documentation slightly.
2018-09-09 17:17:38 -04:00
Thomas Harte
3c33ccd730
Eliminates various blank lines.
2018-07-28 10:52:34 -04:00
Thomas Harte
2832792fed
Corrects improper use of doubles.
2018-07-16 21:55:19 -04:00
Thomas Harte
efa45b9504
Adds a right gutter to clip persistence errors.
...
Also uncovers and corrects a long-standing centring error.
2018-07-16 21:52:31 -04:00
Thomas Harte
c9451a5382
Introduces an object for drawing OpenGL rectangles.
2018-07-14 17:42:23 -04:00
Thomas Harte
00cb4d26b3
Corrects typo.
2018-07-11 19:52:55 -04:00
Thomas Harte
c97c5fa03a
[Re-]recalibrates CRT retrace period and affected view windows.
...
In the hope of moving the CPC closer to the real CTM visible area.
2018-07-05 22:07:18 -04:00
Thomas Harte
5ab4cfee84
Factors out repeated hex-size setting.
2018-06-21 19:27:54 -04:00
Thomas Harte
a9eb0d02c6
Returns sanity to 8272 logging.
2018-06-20 23:02:32 -04:00
Thomas Harte
283ed8dbae
Increases permissible error in scanline length.
2018-06-19 22:24:11 -04:00
Thomas Harte
adca862166
Finally makes an initial pass at logging macros.
2018-06-18 22:37:19 -04:00
Thomas Harte
b899a22c7d
Hides persistent low-part colour channel errors.
2018-06-14 20:40:27 -04:00
Thomas Harte
14a2e470e4
Corrects overbrightness issue with autogeneration of PAL composite from an RGB source.
2018-06-14 18:25:48 -04:00
Thomas Harte
41dcf1de42
Increases blur again just a little more, after consideration of interlaced output.
2018-06-14 18:25:04 -04:00
Thomas Harte
0c65385c82
Undoes older interpretation of alternating phase.
...
I now understand, hopefully, that it's only the phase of the second colour component that alternates. That has the pointwise effect of reversing the colour signal. Hence the effect of phase errors cancelling themselves out up on successive lines up to a point.
2018-06-14 18:24:32 -04:00
Thomas Harte
f05ee525cb
Tweaks blurriness downward.
2018-06-14 17:41:17 -04:00
Thomas Harte
35e84ff1a8
Corrects NTSC quadrature phase.
2018-05-31 21:40:46 -04:00
Thomas Harte
7226d8d4f7
Eliminates all instances of µ.
2018-05-13 15:46:14 -04:00
Thomas Harte
5d6b5d9f10
Eliminates all emdashes in cross-platform code.
2018-05-13 15:34:31 -04:00
Thomas Harte
0b771ce61a
Removes all instances of the copyright symbol.
2018-05-13 15:19:52 -04:00
Thomas Harte
bd27f61a03
Corrects various impossible-in-real-life compiler warnings.
2018-05-12 18:02:16 -04:00
Thomas Harte
f4097290c2
Made various corrections following a quick for-loop constness audit.
2018-04-30 22:23:57 -04:00
Thomas Harte
074b4c3500
Eliminates repeating cause of misuse.
...
Raises the question as to whether an async task queue should be required at construction; let's see how things look as the project develops.
2018-04-21 15:01:18 -07:00
Thomas Harte
6547560e52
Gives the CRT the ability to move iCoordinate multiplication outside of the fragment loop.
...
That resolves precision issues, as were plaguing the Apple II.
2018-04-18 19:29:03 -04:00
Thomas Harte
1c605d58e3
Removes the CRT requirement for an integral relationship between cycles and samples.
2018-04-16 20:00:56 -04:00
Thomas Harte
10f637d2cf
Enhances the CompoundSource so that constituents can have different volumes.
2018-04-07 14:30:02 -04:00
Thomas Harte
5782cab2a0
Minor whitespace fix.
2018-04-05 21:15:25 -04:00
Thomas Harte
ec72fb3baf
Ensures the SVideo shader gets all proper enable_vertex_attribute_with_pointers.
2018-04-05 21:12:28 -04:00
Thomas Harte
dbe3c5c3f8
Ensures artificial frequency limits are honoured.
2018-04-05 18:40:07 -04:00
Thomas Harte
d061ea232b
Ensures no attempt to compile an SVideo shader without appropriate source.
2018-04-04 19:01:01 -04:00
