Thomas Harte
|
3b7ecbdf0d
|
Renamed result_ to result_stack_ to emphasis the fact that it goes backwards. Switched meaning of CB so that it is set for the entire command, execution and result phases.
|
2017-08-06 20:17:12 -04:00 |
|
Thomas Harte
|
01efb645cb
|
Took a reasonable gamble that the CHRN reported is from internal registers, not from the last-found header.
|
2017-08-06 19:57:34 -04:00 |
|
Thomas Harte
|
b5ec1f42d5
|
Started resetting 'busy' when entering the result phase. AMSDOS now complains of a missing disk after failing to find sector 01. My belief is that it should end up asking for C1. So this is not even getting through a failure to find a sector correctly yet.
|
2017-08-06 19:48:17 -04:00 |
|
Thomas Harte
|
c839556a27
|
Fixed: rewind the file to check for 'EXTENDED' if 'MV - CPC' failed.
|
2017-08-06 19:47:10 -04:00 |
|
Thomas Harte
|
e9972aa0dd
|
Added respect for the index-hole limit on reading, and an error phase.
|
2017-08-06 19:25:44 -04:00 |
|
Thomas Harte
|
1c9a744b01
|
Made an effort to start inspecting ID fields, at least. Discovered that my emulation has somehow stopped proceeding beyond sense interrupt status though. Fix one in that area: adjust ST0 just in time for the sense interrupt status response, as that'll need to specify the drive number properly.
|
2017-08-06 18:06:20 -04:00 |
|
Thomas Harte
|
e6d4bb29d8
|
Discovered correct sense interrupt status result if nobody is in the completed seeking state, and switched to it. It's a single 0x80 rather than two bytes.
|
2017-08-06 15:34:33 -04:00 |
|
Thomas Harte
|
6c5b562d97
|
Made an attempt at some of the correct seek/recalibrate behaviour: it's now asynchronous from command processing and able to work on up to four drives at once. I just probably am not yet hitting all the status flags I need to hit.
|
2017-08-06 15:22:07 -04:00 |
|
Thomas Harte
|
a7103f9333
|
Disks are now communicated to the 8272. Which is able to handle four of them.
|
2017-08-06 13:24:14 -04:00 |
|
Thomas Harte
|
c12425e141
|
Added storage for the extended four status registers, and made an attempt at implementing the two most trivial result-phase commands. Am slightly paused momentarily trying to figure out whether seek activity is orthogonal to read/write activity.
|
2017-08-06 12:55:57 -04:00 |
|
Thomas Harte
|
89f6de1383
|
Started on a real ugly-implementation coroutine approach, and implemented specify as a fairly trivial first command: it has no result phase, and is the only thing called by AMSDOS as part of the initialisation sequence.
|
2017-08-06 12:36:18 -04:00 |
|
Thomas Harte
|
77da582e88
|
Switched the container in which events are passed to int, with the intention of subclasses extending the receivable range.
|
2017-08-06 12:35:20 -04:00 |
|
Thomas Harte
|
34eaf75352
|
Fixed WAIT_FOR_TIME macro.
|
2017-08-06 12:08:54 -04:00 |
|
Thomas Harte
|
ffadb04761
|
Documented, and removed a couple of Event types that are WD-specific but had accidentally flown into here. Will need to figure out how best to expose the CRC result too, but I'm willing to let that one drop out naturally as I implement the 8272.
|
2017-08-06 11:36:36 -04:00 |
|
Thomas Harte
|
29288b690e
|
Switched disk controllers to be instantiated explicitly in terms of cycles, created an Amstrad-specific subclass of the 8272 to record the direct programmatic availability of all disk motors bundled together, and otherwise adjusted to ensure the thing is clocked and that the motor is enabled and disabled appropriately. The 8272 is also now formally a subclass of the incoming MDM controller.
|
2017-08-06 09:45:16 -04:00 |
|
Thomas Harte
|
25fd3f7e50
|
Mildly increased work in here, still primarily oriented towards logging what I actually need to get done.
|
2017-08-05 22:26:59 -04:00 |
|
Thomas Harte
|
4d60b8801c
|
Started trying to factor out just the PLL stream -> FM/MFM events part that is presently in the WD1770.
|
2017-08-05 22:26:15 -04:00 |
|
Thomas Harte
|
3e984e75b6
|
Strung up an empty shell that eventually should contain the 8272, and added appropriate IO decoding to the Amstrad.
|
2017-08-05 19:45:52 -04:00 |
|
Thomas Harte
|
9e8645ca7a
|
Fixed ROM paging port decoding. It should have been fd00 if completely decoded, not df00, but also shouldn't be completely decoded.
|
2017-08-05 19:24:03 -04:00 |
|
Thomas Harte
|
caf3ac0645
|
Sought: (i) to instruct the CPC that it should be a 664, not a 464, if given a disk image (at least until I have RAM paging implemented for a 6128); (ii) to support ROM selection within the CPC and allow paging in of AMSDOS.
|
2017-08-05 19:20:38 -04:00 |
|
Thomas Harte
|
0f4343cd84
|
Merge pull request #177 from TomHarte/DSKFileFormat
Introduces parsing of the file format support for the simplest of CPC disks
|
2017-08-05 11:55:13 -04:00 |
|
Thomas Harte
|
192f232d3f
|
Silenced warnings.
|
2017-08-05 11:53:29 -04:00 |
|
Thomas Harte
|
6e4d3b8a77
|
Added enough logic to produce some sort of version of a completely unprotected DSK. So enough to start bootstrapping an FDC emulation, at least.
|
2017-08-05 11:44:53 -04:00 |
|
Thomas Harte
|
8eda24261c
|
Removed unnecessary header — it's implied by being a child of FileHolder.
|
2017-08-05 11:44:06 -04:00 |
|
Thomas Harte
|
75c59fefab
|
Added an empty husk to begin support for Amstrad CPC disk image formats.
|
2017-08-05 10:02:10 -04:00 |
|
Thomas Harte
|
4b19cf60df
|
Added omitted semicolon.
|
2017-08-05 09:18:55 -04:00 |
|
Thomas Harte
|
2b476554e7
|
Merge pull request #176 from TomHarte/AYDeferrer
Corrects the CPC's handling of AY time accumulation
|
2017-08-05 09:13:47 -04:00 |
|
Thomas Harte
|
b3788fed41
|
Fixed AY queuing behaviour as handled by the Amstrad. I think I need to come up with clearer semantics here.
|
2017-08-05 09:12:17 -04:00 |
|
Thomas Harte
|
b999c1d8aa
|
Merge branch 'FilteredSync'
|
2017-08-04 16:52:14 -04:00 |
|
Thomas Harte
|
a63aa80dc9
|
Merge branch 'master' of github.com:TomHarte/CLK
|
2017-08-04 16:51:52 -04:00 |
|
Thomas Harte
|
63f57c8c4f
|
Adjusted visible portion of frame; completely empirical, as I'm chasing a machine that shipped with a monitor.
|
2017-08-04 16:51:46 -04:00 |
|
Thomas Harte
|
7e6a6365c9
|
Adjusted visible portion of frame; completely empirical, as I'm chasing a machine that shipped with a monitor.
|
2017-08-04 16:50:58 -04:00 |
|
Thomas Harte
|
3dbf26ac49
|
Merge pull request #175 from TomHarte/FilteredSync
Introduces filtering of the CRTC's hsync signal into the gate array.
|
2017-08-04 16:38:52 -04:00 |
|
Thomas Harte
|
f075fea78c
|
Introduces filtering of the CRTC's vsync signal into the gate array.
|
2017-08-04 16:36:55 -04:00 |
|
Thomas Harte
|
cc8380c286
|
Merge pull request #174 from TomHarte/ProperBorder
Removes quick-hack solution for border drawing
|
2017-08-04 12:15:22 -04:00 |
|
Thomas Harte
|
c0f0c68f4f
|
Corrects quick-hack version of border drawing: the assumption that the colour must be the same over a plotted period. Also corrects my entry for colour 15.
|
2017-08-04 12:13:05 -04:00 |
|
Thomas Harte
|
c2bb019381
|
Merge pull request #173 from TomHarte/TimingFixes
Corrects two misimplementations of the CPC's interrupt counter
|
2017-08-04 09:06:42 -04:00 |
|
Thomas Harte
|
26ce6cdab2
|
Permitted register 3 to dictate vertical sync length.
|
2017-08-04 08:56:36 -04:00 |
|
Thomas Harte
|
d9097facf1
|
Found documentation that makes more sense, and in practice seems to be more correct: the test after vertical sync is for greater than 32, not less. Also I decided to chance my arm on counter reset also resetting interrupt request. The raster effects of Ghouls 'n' Ghosts is now pretty much correct but one line off. I think probably either something is off in my wait-two logic on the post-vsync timer event, or possibly the vsync bit exposed via the PPI doesn't mean exactly what I think it means.
|
2017-08-04 08:56:09 -04:00 |
|
Thomas Harte
|
b927500487
|
Clarified code a little, but this is mostly fiddling in the margins.
|
2017-08-03 22:00:30 -04:00 |
|
Thomas Harte
|
e71eabedf9
|
Fixed timer clearing tet.
|
2017-08-03 21:30:04 -04:00 |
|
Thomas Harte
|
33ed27c3ad
|
Minor tidiness: included missing headers, and spaced out the ROM type and key lists for readability.
|
2017-08-03 12:45:42 -04:00 |
|
Thomas Harte
|
45cbab6751
|
Merge pull request #172 from TomHarte/KeyboardMachines
Publicly declares the ZX80/81 and Amstrad CPC as keyboard machines
|
2017-08-03 12:39:22 -04:00 |
|
Thomas Harte
|
a7b74d6164
|
Merge pull request #171 from TomHarte/EverMoreTZX
Further expands the implemented subset of the TZX file format
|
2017-08-03 12:38:44 -04:00 |
|
Thomas Harte
|
575b1dba75
|
Formally declared the ZX80/81 and Amstrad CPC as keyboard machines in their public interface. Which means not having to repeat the meaning of set_key_state and clear_all_keys. So: a minor DRY improvement.
|
2017-08-03 12:38:22 -04:00 |
|
Thomas Harte
|
a3b16b6dfa
|
Further beefs up the list of chunks that this TZX parser can either comprehend or skip.
|
2017-08-03 12:13:41 -04:00 |
|
Thomas Harte
|
c8f4de6f11
|
Merge pull request #170 from TomHarte/KeyboardCraziness
Separates knowing the mapping from ASCII to machine keys from the act of typing them
|
2017-08-03 11:53:42 -04:00 |
|
Thomas Harte
|
bbb17acf3a
|
Expanded interface so that an external machine caller can request a string be typed without any knowledge of whatever it intends to do re: CharacterMappers. Which is immediately useful in paste functionality.
|
2017-08-03 11:50:50 -04:00 |
|
Thomas Harte
|
ad3a98387f
|
Within the Typer framework: hatched out CharacterMapper as a distinct thing from the target for keypresses, better to formalise responsibility but also to make it easy cleanly to sever that stuff into its own little part.
|
2017-08-03 11:42:31 -04:00 |
|
Thomas Harte
|
985fbf59c2
|
Merge pull request #169 from TomHarte/Z80HasA
Converts the Z80 into a BusAdaptor-type component
|
2017-08-02 22:42:49 -04:00 |
|