Thomas Harte
|
41a30c147d
|
Adjusted: invalid register selection simply deselects all registers.
|
2017-08-07 19:51:36 -04:00 |
|
Thomas Harte
|
4709ae80cb
|
Added port direction tests.
|
2017-08-07 19:36:55 -04:00 |
|
Thomas Harte
|
7fbb455836
|
Per the CPC test I'm checking, 0s should be returned for non-retained bits, not 1s.
|
2017-08-07 19:07:12 -04:00 |
|
Thomas Harte
|
745afd217f
|
The port input/output flags are now honoured; reading a port that is set as an output returns the current output value.
|
2017-08-07 19:01:18 -04:00 |
|
Thomas Harte
|
4427e9a254
|
Merge pull request #178 from TomHarte/CPC664
Introduces the beginning seeds 8272 emulation, and therefore floppy emulation for the CPC
|
2017-08-07 18:39:33 -04:00 |
|
Thomas Harte
|
2b0dcf8573
|
Transcribed the status bits that I think actually need to be obeyed.
|
2017-08-07 12:37:45 -04:00 |
|
Thomas Harte
|
47732ffb98
|
Prevented the 8272 from overreading ID fields (and, by doing so, overrunning its internal buffer). Exposed the MFMController's CRC generator for inspection.
|
2017-08-07 12:37:22 -04:00 |
|
Thomas Harte
|
d07f3216ab
|
Added a broad phase on whether seeking is ongoing.
|
2017-08-07 12:12:59 -04:00 |
|
Thomas Harte
|
56d65ba6f3
|
Adapted slightly, to retain the ability to advertise an incorrect size, to adjust the confusion I've created by having two different types of thing both called new_sector, and to print a warning when ignoring error flags.
|
2017-08-07 12:12:04 -04:00 |
|
Thomas Harte
|
895a3cbf24
|
Corrected reading of the track size table for extended disks. My first extended disk has now loaded.
|
2017-08-07 11:38:19 -04:00 |
|
Thomas Harte
|
d951c8c1c2
|
Fixed search for track start position with extended disks: it's no longer an infinite loop. So that's a pretty good performance improvement.
|
2017-08-07 11:36:29 -04:00 |
|
Thomas Harte
|
a294963e98
|
Made an absolutely basic attempt to accommodate some extended disk images.
|
2017-08-07 11:26:15 -04:00 |
|
Thomas Harte
|
68c73184b1
|
Had failed to spot that by taking control of stepping at this level, the appropriate invalidate_tracks were not being sent.
|
2017-08-07 10:36:53 -04:00 |
|
Thomas Harte
|
7f824d6494
|
Ensured seeks and recalibrates end immediately if no seeking is required.
|
2017-08-07 10:31:32 -04:00 |
|
Thomas Harte
|
3219212f03
|
A closer inspection of the data sheet seems to suggest that invalid command sequences will post ST0.
|
2017-08-07 07:35:41 -04:00 |
|
Thomas Harte
|
d90e35e5bd
|
Added a bunch of comments, and ensured that the data request bit remains set for the entire period that command bytes are accepted.
|
2017-08-07 07:27:00 -04:00 |
|
Thomas Harte
|
73f8488150
|
Reaching the end of the usable part of my day, decided to tidy up a little before bed with indentation that reflects a distinction between top-level entry points and mere loops.
|
2017-08-06 22:14:18 -04:00 |
|
Thomas Harte
|
3853966a1e
|
Removed formal storage of ST3, as it just seems to be composed live. This may turn out also to be the best way to deal with ST0–2, time will tell. Also took a stab at the error in responding properly to the ROM's intended use of seek might be accepting new commands as replacements for old ones rather than rejecting them. That didn't seem to do the trick.
|
2017-08-06 22:10:12 -04:00 |
|
Thomas Harte
|
d63893a437
|
Collapsed implementations of recalibrate and seek, and decided to intend to go for an upward count on steps taken rather than a downward one. But seek continues presently to fail.
|
2017-08-06 21:52:52 -04:00 |
|
Thomas Harte
|
90c74043f5
|
Remembered to toggle off RQM between bytes. CAT now works.
|
2017-08-06 21:21:59 -04:00 |
|
Thomas Harte
|
600445d90a
|
Made a first attempt to return sector contents.
|
2017-08-06 20:40:29 -04:00 |
|
Thomas Harte
|
e4b405fd3d
|
With the ROM now using a read ID to set its expectations, implemented that and fixed FIND/READ_HEADER macros for multiple use. Execution now reaches the unimplemented section of read data.
|
2017-08-06 20:32:46 -04:00 |
|
Thomas Harte
|
3b7ecbdf0d
|
Renamed result_ to result_stack_ to emphasis the fact that it goes backwards. Switched meaning of CB so that it is set for the entire command, execution and result phases.
|
2017-08-06 20:17:12 -04:00 |
|
Thomas Harte
|
01efb645cb
|
Took a reasonable gamble that the CHRN reported is from internal registers, not from the last-found header.
|
2017-08-06 19:57:34 -04:00 |
|
Thomas Harte
|
b5ec1f42d5
|
Started resetting 'busy' when entering the result phase. AMSDOS now complains of a missing disk after failing to find sector 01. My belief is that it should end up asking for C1. So this is not even getting through a failure to find a sector correctly yet.
|
2017-08-06 19:48:17 -04:00 |
|
Thomas Harte
|
c839556a27
|
Fixed: rewind the file to check for 'EXTENDED' if 'MV - CPC' failed.
|
2017-08-06 19:47:10 -04:00 |
|
Thomas Harte
|
e9972aa0dd
|
Added respect for the index-hole limit on reading, and an error phase.
|
2017-08-06 19:25:44 -04:00 |
|
Thomas Harte
|
1c9a744b01
|
Made an effort to start inspecting ID fields, at least. Discovered that my emulation has somehow stopped proceeding beyond sense interrupt status though. Fix one in that area: adjust ST0 just in time for the sense interrupt status response, as that'll need to specify the drive number properly.
|
2017-08-06 18:06:20 -04:00 |
|
Thomas Harte
|
e6d4bb29d8
|
Discovered correct sense interrupt status result if nobody is in the completed seeking state, and switched to it. It's a single 0x80 rather than two bytes.
|
2017-08-06 15:34:33 -04:00 |
|
Thomas Harte
|
6c5b562d97
|
Made an attempt at some of the correct seek/recalibrate behaviour: it's now asynchronous from command processing and able to work on up to four drives at once. I just probably am not yet hitting all the status flags I need to hit.
|
2017-08-06 15:22:07 -04:00 |
|
Thomas Harte
|
a7103f9333
|
Disks are now communicated to the 8272. Which is able to handle four of them.
|
2017-08-06 13:24:14 -04:00 |
|
Thomas Harte
|
c12425e141
|
Added storage for the extended four status registers, and made an attempt at implementing the two most trivial result-phase commands. Am slightly paused momentarily trying to figure out whether seek activity is orthogonal to read/write activity.
|
2017-08-06 12:55:57 -04:00 |
|
Thomas Harte
|
89f6de1383
|
Started on a real ugly-implementation coroutine approach, and implemented specify as a fairly trivial first command: it has no result phase, and is the only thing called by AMSDOS as part of the initialisation sequence.
|
2017-08-06 12:36:18 -04:00 |
|
Thomas Harte
|
77da582e88
|
Switched the container in which events are passed to int, with the intention of subclasses extending the receivable range.
|
2017-08-06 12:35:20 -04:00 |
|
Thomas Harte
|
34eaf75352
|
Fixed WAIT_FOR_TIME macro.
|
2017-08-06 12:08:54 -04:00 |
|
Thomas Harte
|
ffadb04761
|
Documented, and removed a couple of Event types that are WD-specific but had accidentally flown into here. Will need to figure out how best to expose the CRC result too, but I'm willing to let that one drop out naturally as I implement the 8272.
|
2017-08-06 11:36:36 -04:00 |
|
Thomas Harte
|
29288b690e
|
Switched disk controllers to be instantiated explicitly in terms of cycles, created an Amstrad-specific subclass of the 8272 to record the direct programmatic availability of all disk motors bundled together, and otherwise adjusted to ensure the thing is clocked and that the motor is enabled and disabled appropriately. The 8272 is also now formally a subclass of the incoming MDM controller.
|
2017-08-06 09:45:16 -04:00 |
|
Thomas Harte
|
25fd3f7e50
|
Mildly increased work in here, still primarily oriented towards logging what I actually need to get done.
|
2017-08-05 22:26:59 -04:00 |
|
Thomas Harte
|
4d60b8801c
|
Started trying to factor out just the PLL stream -> FM/MFM events part that is presently in the WD1770.
|
2017-08-05 22:26:15 -04:00 |
|
Thomas Harte
|
3e984e75b6
|
Strung up an empty shell that eventually should contain the 8272, and added appropriate IO decoding to the Amstrad.
|
2017-08-05 19:45:52 -04:00 |
|
Thomas Harte
|
9e8645ca7a
|
Fixed ROM paging port decoding. It should have been fd00 if completely decoded, not df00, but also shouldn't be completely decoded.
|
2017-08-05 19:24:03 -04:00 |
|
Thomas Harte
|
caf3ac0645
|
Sought: (i) to instruct the CPC that it should be a 664, not a 464, if given a disk image (at least until I have RAM paging implemented for a 6128); (ii) to support ROM selection within the CPC and allow paging in of AMSDOS.
|
2017-08-05 19:20:38 -04:00 |
|
Thomas Harte
|
0f4343cd84
|
Merge pull request #177 from TomHarte/DSKFileFormat
Introduces parsing of the file format support for the simplest of CPC disks
|
2017-08-05 11:55:13 -04:00 |
|
Thomas Harte
|
192f232d3f
|
Silenced warnings.
|
2017-08-05 11:53:29 -04:00 |
|
Thomas Harte
|
6e4d3b8a77
|
Added enough logic to produce some sort of version of a completely unprotected DSK. So enough to start bootstrapping an FDC emulation, at least.
|
2017-08-05 11:44:53 -04:00 |
|
Thomas Harte
|
8eda24261c
|
Removed unnecessary header — it's implied by being a child of FileHolder.
|
2017-08-05 11:44:06 -04:00 |
|
Thomas Harte
|
75c59fefab
|
Added an empty husk to begin support for Amstrad CPC disk image formats.
|
2017-08-05 10:02:10 -04:00 |
|
Thomas Harte
|
4b19cf60df
|
Added omitted semicolon.
|
2017-08-05 09:18:55 -04:00 |
|
Thomas Harte
|
2b476554e7
|
Merge pull request #176 from TomHarte/AYDeferrer
Corrects the CPC's handling of AY time accumulation
|
2017-08-05 09:13:47 -04:00 |
|
Thomas Harte
|
b3788fed41
|
Fixed AY queuing behaviour as handled by the Amstrad. I think I need to come up with clearer semantics here.
|
2017-08-05 09:12:17 -04:00 |
|