Thomas Harte
fa800bb809
Introduces code for minterm application.
2021-09-20 19:13:23 -04:00
Thomas Harte
e402e690b0
Assume and test that divide-by-zero posts the PC of the offending instruction.
2021-08-07 17:51:00 -04:00
Thomas Harte
b4ec9d70da
Adds the CNT input.
2021-08-03 22:19:41 -04:00
Thomas Harte
738999a8b7
Further expands list of applied tests.
2021-08-03 22:08:50 -04:00
Thomas Harte
34c1cc5693
Adds entry points for all remaining tests.
...
Failing now: the TB123s, which are TOD related, both CIA2 tests, and CIA1TAB (which I think needs me to implement Port B output toggling).
2021-08-03 17:19:35 -04:00
Thomas Harte
f0ef45f0ca
Introduces two further tests.
2021-08-03 16:58:51 -04:00
Thomas Harte
f576baf214
I'm not yet sure this is the best approach, but starts trying to make use of Lorenz's 6526 tests.
2021-07-30 21:21:16 -04:00
Thomas Harte
94907b51aa
Remove redundant parameter.
2021-07-06 20:47:49 -04:00
Thomas Harte
0085265d13
Test for a longer period; fix expected tone 1 count.
2021-07-06 20:46:22 -04:00
Thomas Harte
8e0893bd42
Clarifies control flow.
2021-07-06 20:28:32 -04:00
Thomas Harte
704dc9bdcb
Improves test, to assert that state toggles happen at interrupts.
2021-07-06 20:25:32 -04:00
Thomas Harte
3e6b804896
Switches to linked 1/50/1000 Hz timers, and per-interrupt state toggling.
2021-07-06 20:12:44 -04:00
Thomas Harte
f371221dba
Add a quick test of tone generator 1.
2021-07-02 23:57:11 -04:00
Thomas Harte
27b0579ec6
Avoid stack-error test case.
...
Also test that the interrupt is generated on the downward stroke.
2021-07-02 23:55:43 -04:00
Thomas Harte
283092cfbc
With a unit test in aid, corrects some lingering TimedInterruptSource
issues.
2021-07-02 23:41:19 -04:00
Thomas Harte
fbf1adef05
Introduces unit test and thereby seemingly fixes get_next_sequence_point.
...
There's still improper output in the actual machine though, so maybe something else is afoot?
2021-06-18 17:44:17 -04:00
Thomas Harte
f27e331462
Updates autotests to new RomFetcher world.
2021-06-06 20:34:55 -04:00
Thomas Harte
37dcf61130
Add timing tests, fix +3 discrepancy.
2021-04-23 22:29:57 -04:00
Thomas Harte
a1511f9600
Establishes that the 48/128kb contention patterns can be derived from my partial machine cycles alone.
2021-04-14 20:15:40 -04:00
Thomas Harte
68a04f4e6a
Adds IN/OUT I/D [R] to complete tests.
2021-04-13 22:00:24 -04:00
Thomas Harte
0d61902b10
Adds CP[I/D/IR/DR] tests.
2021-04-13 20:03:11 -04:00
Thomas Harte
3eec210b30
Adds LDI/LDD/LDIR/LDDR tests.
2021-04-13 20:00:29 -04:00
Thomas Harte
2e70b5eb9f
Advances to EX (SP), HL, leaving only [LD/CP/IN/OT][I/D]{R}.
2021-04-13 19:45:29 -04:00
Thomas Harte
8a3bfb8672
Adds an IN/OUT test.
2021-04-13 17:55:51 -04:00
Thomas Harte
06f1e64177
Advances to IO.
2021-04-12 21:41:20 -04:00
Thomas Harte
b42780173a
Establishes that there really is no Read4 and Read4Pre distinction.
...
Will finish these unit tests, then clean up.
2021-04-12 20:54:10 -04:00
Thomas Harte
36c8821c4c
Reaches the halfway point in tests.
2021-04-12 17:29:03 -04:00
Thomas Harte
9347fe5f44
Advances to next failing test: LD (ii+n), n
.
2021-04-12 17:11:58 -04:00
Thomas Harte
e82367def3
Switches to test-conformant behaviour for (IX/IY+n) opcode fetches.
2021-04-11 23:01:00 -04:00
Thomas Harte
47c5a243aa
Restructures, the better to explore errors.
2021-04-10 21:32:42 -04:00
Thomas Harte
070e359d82
Introduces failing test for BIT b, (ii+n).
2021-04-10 18:00:23 -04:00
Thomas Harte
400f54e508
Introduces failing test for bit b, (hl).
2021-04-10 12:04:48 -04:00
Thomas Harte
e0736435f8
Makes assumption that the address bus just holds its value during an internal operation.
2021-04-10 12:00:53 -04:00
Thomas Harte
b09c5538c6
Adds failing test for simple (ii+n) tests.
2021-04-09 21:28:35 -04:00
Thomas Harte
ce3d2913bf
Advances to 9 source table rows tested out of 37.
2021-04-09 20:38:17 -04:00
Thomas Harte
87202a2a27
Add two further tests, add checking of collected data size for all tests.
2021-04-09 18:32:03 -04:00
Thomas Harte
818a4dff25
Corrects ADD HL, dd test.
...
Or, at least, likely corrects. The bus cycle breakdown in the Z80 data sheet implies these accesses should come after completion of the refresh cycle, not during its long tail, so I think +1 is correct.
2021-04-08 22:23:15 -04:00
Thomas Harte
9e506c3206
Adds failing ADD hl, dd test.
2021-04-08 22:19:22 -04:00
Thomas Harte
50f53f7d97
Adds INC/DEC rr and LD SP, HL tests.
2021-04-08 22:14:53 -04:00
Thomas Harte
73fbd89c85
Correct opcodes, ability to terminate on a single-cycle contention.
2021-04-08 22:09:33 -04:00
Thomas Harte
f74fa06f2d
Introduces failing test for LD [A/I/R], [A/I/R].
2021-04-08 20:28:55 -04:00
Thomas Harte
ee989ab762
Fills in the rest of the simple two-byte instructions.
2021-04-08 20:13:52 -04:00
Thomas Harte
818655a9b6
Starts on two-bus-cycle instructions, correcting validators.
2021-04-08 20:01:46 -04:00
Thomas Harte
57a7e0834f
Corrects sampling of MREQ.
2021-04-08 19:21:35 -04:00
Thomas Harte
cd787486d2
Tests all of the single-byte, no-access opcodes.
2021-04-07 22:07:52 -04:00
Thomas Harte
67fd6787a6
Builds what I think I need to validate Z80 address, MREQ, IOREQ and RFSH.
2021-04-07 21:57:40 -04:00
Thomas Harte
094d623485
Updates unit tests.
2021-04-05 21:33:04 -04:00
C.W. Betts
5758693b7d
Minor pokes to the test files code.
2021-03-19 02:19:49 -06:00
Thomas Harte
e5076b295b
Corrects namespace.
2021-01-21 18:58:11 -05:00
Thomas Harte
3c20e1f037
Adds files for the M50740 and corrects namespace errors elsewhere.
2021-01-15 21:30:30 -05:00