9008 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Thomas Harte	8bd04a6be4	Switched model for filter subclasses. Implemented test square[-ish] wave to check for obvious stream errors. None is clear.	2016-01-14 21:27:02 -05:00
Thomas Harte	781249acf7	Fixed crash.	2016-01-14 20:35:36 -05:00
Thomas Harte	38ffcaa262	Here, at last, is _some_ audio output, at least.	2016-01-14 20:33:22 -05:00
Thomas Harte	afde8dac49	Closed the loop such that audio manages to bubble up into Objective-C.	2016-01-13 22:38:59 -05:00
Thomas Harte	439d452e23	Resolved some errors.	2016-01-13 22:11:33 -05:00
Thomas Harte	49e89a4bcb	I'm not yet completely convinced by my approach to time basing, but it'll probably do? If so then this more or less gets me ready for a point-sampled filtering.	2016-01-13 22:02:39 -05:00
Thomas Harte	d9a7ef9e46	Edging towards audio output; the speaker is given appropriate input and output rates, and then updated with current divider and enabled/disabled status.	2016-01-13 21:03:43 -05:00
Thomas Harte	d28abdc037	Made an attempt at correct timing, adding support for additional paged ROMs, added file association for .rom.	2016-01-12 22:34:26 -05:00
Thomas Harte	84ba4e2900	Tidied a little, started working towards supporting speaker output.	2016-01-12 22:19:56 -05:00
Thomas Harte	3437781abd	Started sketching out an interface for sound generation. Which made me realise that the CRT in CRTDelegate was redundant, since C++ has namespaces.	2016-01-12 16:54:09 -05:00
Thomas Harte	6112f4ef6b	Withdrew soft filtering for now; until the sampling frequency is passed on it's not sufficiently rigorous.	2016-01-12 16:42:16 -05:00
Thomas Harte	75d6ec354b	Added some very basic filtering in RGB mode.	2016-01-12 16:27:09 -05:00
Thomas Harte	49a36ec9ac	Added F12 as break.	2016-01-11 22:35:52 -05:00
Thomas Harte	cba09b5490	Switched display update and RAM write order.	2016-01-11 22:29:16 -05:00
Thomas Harte	650077feac	Pulled a few things out as constants, zoomed in a little. Still in a 4:3 window though.	2016-01-11 22:18:34 -05:00
Thomas Harte	72019d0ea3	Made an attempt to get video output correct.	2016-01-11 22:08:30 -05:00
Thomas Harte	e93dbdb463	Implemented keyboard input.	2016-01-11 19:48:31 -05:00
Thomas Harte	ce916ebd6a	Fixed runaway frame generator.	2016-01-10 23:32:57 -05:00
Thomas Harte	93f7df04a0	Ensured correctly timed sampling of the interrupt line.	2016-01-10 22:55:56 -05:00
Thomas Harte	ccf20299a3	Made an attempt at getting some interrupts all up inside this thing.	2016-01-10 19:06:46 -05:00
Thomas Harte	cc5ba8243e	Fixed: turned out the power-on bit was being cleared.	2016-01-10 17:17:39 -05:00
Thomas Harte	d95414b2eb	I'm not really sure what's going wrong with paging yet but this fixes the 0xc000 byte error.	2016-01-10 12:30:24 -05:00
Thomas Harte	e07981c147	Fixed screen start address.	2016-01-09 22:52:08 -05:00
Thomas Harte	1308332a71	Hard-coded to 40 columns of black and white, here's some text, at least.	2016-01-09 22:39:46 -05:00
Thomas Harte	037602765a	This now correctly (I think) decodes information posted to the CRT. But doesn't yet post it correctly. I'm very close now, I hope.	2016-01-09 22:19:00 -05:00
Thomas Harte	07a041d788	Fixed vertical retrace sync.	2016-01-09 21:54:31 -05:00
Thomas Harte	3d6f20b7b9	Output, at last! Though sync is clearly way off.	2016-01-09 21:53:33 -05:00
Thomas Harte	09df218c01	Some output! Showing that three lines of solid sync isn't smart. But here it is.	2016-01-09 21:48:53 -05:00
Thomas Harte	b4f31edea3	Made an attempt to get RGB output mode up and running, and showing at least a box where pixels would be.	2016-01-09 21:32:56 -05:00
Thomas Harte	a900bfed65	Fixed to ensure that frame rendering wraps around, and to properly connect the Electron to its view. Now I need a working pixel shader.	2016-01-09 20:34:22 -05:00
Thomas Harte	7341f5c341	This is intended to be enough to start producing something of an output. But something's obviously still broken.	2016-01-09 20:26:40 -05:00
Thomas Harte	716bb3281b	This at least now connects up a CRT, though it never talks to it.	2016-01-07 22:26:49 -05:00
Thomas Harte	47a7654c00	Added just enough that this is probably a successful boot. I guess I'm going to need to get invested in graphics next? Hmmm.	2016-01-07 21:01:13 -05:00
Thomas Harte	8c1bfa5a05	This is the bare minimum to prove that the ROM is trying properly to boot.	2016-01-07 20:36:27 -05:00
Thomas Harte	0db8938d27	Added the option for the CSCathodeRayView to show only a subsection of the full scan area. Zoomed in a little on the 2600. Put in enough piping to give the Electron sight of its ROMs at least.	2016-01-06 23:14:36 -05:00
Thomas Harte	bfd9957c81	You now get an Electron only if you ask for a new file. That'll do for now while it's the only thing that one might want to start without supplying a file. The 6502 now starts from a defined point — being reset. The Electron is starting to grow the absolute most simple buds of its memory map.	2016-01-06 21:09:49 -05:00
Thomas Harte	c69b3256ba	Slightly simplified Swift usage.	2016-01-04 23:44:36 -05:00
Thomas Harte	616dc0b57c	Okay, so this is the absolute bare minimum about of refactoring and wiring necessary to get the [unimplemented] Electron machine pumping.	2016-01-04 23:40:43 -05:00
Thomas Harte	43ab8bbad5	Okay, so then here's a first shot at the Objective-C -> C++ bridge for the Electron.	2016-01-04 23:16:37 -05:00
Thomas Harte	ab45c1d530	Started working on a shell for the Electron emulation, including factoring out the common CRT delegate -> Objective-C bridging, serial dispatch queue and frameskipping logic from the Atari 2600 shell.	2016-01-04 23:12:47 -05:00
Thomas Harte	22fa024546	Added document XIB.	2016-01-03 20:46:39 -05:00
Thomas Harte	aa0714fe27	Started sketching out an Acorn Electron emulation, as it's a platform I'm familiar with and will force me to figure out PAL decoding. Factored out NTSC-specific parts of the display decoding logic and hence added RGB output mode.	2016-01-03 20:41:43 -05:00
Thomas Harte	96503a3ac5	Switched to nicer nullable/nonnull syntax.	2016-01-02 17:59:21 -05:00
Thomas Harte	feeedbe33b	The standard Xcode versioning updates. Nothing of substance.	2016-01-02 17:57:23 -05:00
Thomas Harte	675070c5dd	Very, _very_ minor: switched to normal C++ constructor syntax for simple variable initialisation.	2015-12-06 16:53:37 -05:00
Thomas Harte	5feef2110f	Added a very basic attempt at shadow mask emulation.	2015-09-24 21:23:16 -04:00
Thomas Harte	63b648be65	Switched down to four samples per pixel, just more than half as many, to fit into a vec4. Edges aren't as smooth but I'm wondering whether it'll make much odds when I implement a shadow mask.	2015-09-17 19:25:15 -04:00
Thomas Harte	5d6bee4927	Of course, being in-phase means being the cosine wave.	2015-09-10 21:30:39 -04:00
Thomas Harte	82aa6d074a	'type' is out, at least for the time being.	2015-09-05 20:25:30 -04:00
Thomas Harte	6a0b4e86c8	An Xcode beta version bump, nothing more.	2015-09-05 17:21:36 -04:00