uz 49cdfcf5b0 The BASIC stub does encode the start address with only 4 digits. Add a check ... so the linker will not generate an invalid header for program files with larger start addresses. git-svn-id: svn://svn.cc65.org/cc65/trunk@5074 b7a2c559-68d2-44c3-8de9-860c34a00d81		2011-07-08 08:58:41 +00:00
..
apple2	Back to revision 3818: The value of COLOR_WHITE changed back from 3 to 1.	2011-05-05 20:43:10 +00:00
apple2enh	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
atari	interruptor support by Stefan Haubenthal	2011-06-13 16:42:45 +00:00
atmos	Fixes for program arguments and TAP header by Stefan Haubenthal.	2011-07-03 13:23:07 +00:00
c16	Changed the startup module and the linker config for the C16 to use the common	2010-11-17 12:46:55 +00:00
c64	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
c128	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
cbm	The BASIC stub does encode the start address with only 4 digits. Add a check	2011-07-08 08:58:41 +00:00
cbm510	Removed unused TGI mode tables.	2011-05-02 10:30:49 +00:00
cbm610	Fixed order of options in call to ld65, which became important after the	2010-11-09 21:33:14 +00:00
common	Removed __fastcall__ declarations for functions without parameters.	2011-07-07 20:19:35 +00:00
conio
dbg
em
geos	Computed pixel aspect ratio (PAR) by presuming a display aspect ratio (DAR) of 4/3 for a classic CRT and using the given driver resolutions as storage aspect ratio (SAR).	2011-05-02 11:23:30 +00:00
joystick
lynx	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
mouse
nes	Fixed order of rules, so not only the tgi driver gets built.	2011-06-22 08:19:59 +00:00
pet	Changed the startup module and the linker config for the Commodore PET to use	2010-11-17 13:27:43 +00:00
plus4	Removed unused TGI mode tables.	2011-05-02 10:30:49 +00:00
runtime	Fixed an error in the division routine: The high byte of the wrong 16 bit	2011-01-11 17:08:29 +00:00
serial	Added --forget-inc-paths to the assembler command line to avoid problems if	2009-12-18 11:58:50 +00:00
supervision	Exclude (small) stack from RAM memory area (like on most other targets) to make explicit that the linker may not use all RAM. If the cc65 parameter stack isn't used at all the __STACKSIZE__ symbol may be overridden on the linker command line with -D __STACKSIZE__=0.	2010-10-02 10:20:00 +00:00
tgi	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-03 21:28:20 +00:00
vic20	Changed the startup module and the linker config for the Commodore VIC to use	2010-11-17 13:35:43 +00:00
zlib
Makefile	NES character mode TGI driver. By Stefan Haubenthal.	2011-06-21 20:34:18 +00:00