6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-30 17:33:24 +00:00
Code Issues Projects Releases Wiki Activity
737c2ac4fc
llvm-6502/lib/Target/PowerPC/PPCInstrVSX.td

817 lines
37 KiB
TableGen
Raw Normal View History

[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
//===- PPCInstrVSX.td - The PowerPC VSX Extension --*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the VSX extension to the PowerPC instruction set.
//
//===----------------------------------------------------------------------===//
def PPCRegVSRCAsmOperand : AsmOperandClass {
let Name = "RegVSRC"; let PredicateMethod = "isVSRegNumber";
}
def vsrc : RegisterOperand<VSRC> {
let ParserMatchClass = PPCRegVSRCAsmOperand;
}
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
def PPCRegVSFRCAsmOperand : AsmOperandClass {
let Name = "RegVSFRC"; let PredicateMethod = "isVSRegNumber";
}
def vsfrc : RegisterOperand<VSFRC> {
let ParserMatchClass = PPCRegVSFRCAsmOperand;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
multiclass XX3Form_Rcr<bits<6> opcode, bits<7> xo, dag OOL, dag IOL,
string asmbase, string asmstr, InstrItinClass itin,
list<dag> pattern> {
let BaseName = asmbase in {
def NAME : XX3Form_Rc<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(" ", asmstr)), itin,
pattern>;
let Defs = [CR6] in
def o : XX3Form_Rc<opcode, xo, OOL, IOL,
!strconcat(asmbase, !strconcat(". ", asmstr)), itin,
[]>, isDOT;
}
}
def HasVSX : Predicate<"PPCSubTarget.hasVSX()">;
let Predicates = [HasVSX] in {
let AddedComplexity = 400 in { // Prefer VSX patterns over non-VSX patterns.
let neverHasSideEffects = 1 in { // VSX instructions don't have side effects.
let Uses = [RM] in {
// Load indexed instructions
let mayLoad = 1, canFoldAsLoad = 1 in {
def LXSDX : XForm_1<31, 588,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins memrr:$src),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"lxsdx $XT, $src", IIC_LdStLFD,
[(set f64:$XT, (load xoaddr:$src))]>;
def LXVD2X : XForm_1<31, 844,
(outs vsrc:$XT), (ins memrr:$src),
"lxvd2x $XT, $src", IIC_LdStLFD,
[(set v2f64:$XT, (load xoaddr:$src))]>;
def LXVDSX : XForm_1<31, 332,
(outs vsrc:$XT), (ins memrr:$src),
"lxvdsx $XT, $src", IIC_LdStLFD, []>;
def LXVW4X : XForm_1<31, 780,
(outs vsrc:$XT), (ins memrr:$src),
[PowerPC] Remove some dead VSX v4f32 store patterns These patterns are dead (because v4f32 stores are currently promoted to v4i32 and stored using Altivec instructions), and also are likely not correct (because they'd store the vector elements in the opposite order from that assumed by the rest of the Altivec code). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204839 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 18:26:36 +00:00
"lxvw4x $XT, $src", IIC_LdStLFD, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
}
// Store indexed instructions
let mayStore = 1 in {
def STXSDX : XX1Form<31, 716,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs), (ins vsfrc:$XT, memrr:$dst),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"stxsdx $XT, $dst", IIC_LdStSTFD,
[(store f64:$XT, xoaddr:$dst)]>;
def STXVD2X : XX1Form<31, 972,
(outs), (ins vsrc:$XT, memrr:$dst),
"stxvd2x $XT, $dst", IIC_LdStSTFD,
[(store v2f64:$XT, xoaddr:$dst)]>;
def STXVW4X : XX1Form<31, 908,
(outs), (ins vsrc:$XT, memrr:$dst),
[PowerPC] Remove some dead VSX v4f32 store patterns These patterns are dead (because v4f32 stores are currently promoted to v4i32 and stored using Altivec instructions), and also are likely not correct (because they'd store the vector elements in the opposite order from that assumed by the rest of the Altivec code). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204839 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 18:26:36 +00:00
"stxvw4x $XT, $dst", IIC_LdStSTFD, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
}
// Add/Mul Instructions
let isCommutable = 1 in {
def XSADDDP : XX3Form<60, 32,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsadddp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fadd f64:$XA, f64:$XB))]>;
def XSMULDP : XX3Form<60, 48,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmuldp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fmul f64:$XA, f64:$XB))]>;
def XVADDDP : XX3Form<60, 96,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvadddp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fadd v2f64:$XA, v2f64:$XB))]>;
def XVADDSP : XX3Form<60, 64,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvaddsp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fadd v4f32:$XA, v4f32:$XB))]>;
def XVMULDP : XX3Form<60, 112,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvmuldp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fmul v2f64:$XA, v2f64:$XB))]>;
def XVMULSP : XX3Form<60, 80,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvmulsp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fmul v4f32:$XA, v4f32:$XB))]>;
}
// Subtract Instructions
def XSSUBDP : XX3Form<60, 40,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xssubdp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fsub f64:$XA, f64:$XB))]>;
def XVSUBDP : XX3Form<60, 104,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvsubdp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fsub v2f64:$XA, v2f64:$XB))]>;
def XVSUBSP : XX3Form<60, 72,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvsubsp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fsub v4f32:$XA, v4f32:$XB))]>;
// FMA Instructions
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XSMADDADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSMADDADP : XX3Form<60, 33,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmaddadp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fma f64:$XA, f64:$XB, f64:$XTi))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSMADDMDP : XX3Form<60, 41,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmaddmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XSMSUBADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSMSUBADP : XX3Form<60, 49,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmsubadp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fma f64:$XA, f64:$XB, (fneg f64:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSMSUBMDP : XX3Form<60, 57,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmsubmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XSNMADDADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSNMADDADP : XX3Form<60, 161,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnmaddadp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fneg (fma f64:$XA, f64:$XB, f64:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSNMADDMDP : XX3Form<60, 169,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnmaddmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XSNMSUBADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSNMSUBADP : XX3Form<60, 177,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnmsubadp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fneg (fma f64:$XA, f64:$XB, (fneg f64:$XTi))))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSNMSUBMDP : XX3Form<60, 185,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XTi, vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnmsubmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVMADDADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMADDADP : XX3Form<60, 97,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmaddadp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fma v2f64:$XA, v2f64:$XB, v2f64:$XTi))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMADDMDP : XX3Form<60, 105,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmaddmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVMADDASP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMADDASP : XX3Form<60, 65,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmaddasp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fma v4f32:$XA, v4f32:$XB, v4f32:$XTi))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMADDMSP : XX3Form<60, 73,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmaddmsp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVMSUBADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMSUBADP : XX3Form<60, 113,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmsubadp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fma v2f64:$XA, v2f64:$XB, (fneg v2f64:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMSUBMDP : XX3Form<60, 121,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmsubmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVMSUBASP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMSUBASP : XX3Form<60, 81,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmsubasp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fma v4f32:$XA, v4f32:$XB, (fneg v4f32:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVMSUBMSP : XX3Form<60, 89,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvmsubmsp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVNMADDADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMADDADP : XX3Form<60, 225,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmaddadp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fneg (fma v2f64:$XA, v2f64:$XB, v2f64:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMADDMDP : XX3Form<60, 233,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmaddmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVNMADDASP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMADDASP : XX3Form<60, 193,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmaddasp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fneg (fma v4f32:$XA, v4f32:$XB, v4f32:$XTi)))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMADDMSP : XX3Form<60, 201,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmaddmsp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVNMSUBADP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMSUBADP : XX3Form<60, 241,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmsubadp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fneg (fma v2f64:$XA, v2f64:$XB, (fneg v2f64:$XTi))))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMSUBMDP : XX3Form<60, 249,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmsubmdp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
let BaseName = "XVNMSUBASP" in {
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMSUBASP : XX3Form<60, 209,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmsubasp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fneg (fma v4f32:$XA, v4f32:$XB, (fneg v4f32:$XTi))))]>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
let IsVSXFMAAlt = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVNMSUBMSP : XX3Form<60, 217,
(outs vsrc:$XT), (ins vsrc:$XTi, vsrc:$XA, vsrc:$XB),
"xvnmsubmsp $XT, $XA, $XB", IIC_VecFP, []>,
[PowerPC] Add a TableGen relation for A-type and M-type VSX FMA instructions TableGen will create a lookup table for the A-type FMA instructions providing their corresponding M-form opcodes. This will be used by upcoming commits. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204746 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-25 18:55:11 +00:00
RegConstraint<"$XTi = $XT">, NoEncode<"$XTi">,
AltVSXFMARel;
}
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
// Division Instructions
def XSDIVDP : XX3Form<60, 56,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xsdivdp $XT, $XA, $XB", IIC_FPDivD,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set f64:$XT, (fdiv f64:$XA, f64:$XB))]>;
def XSSQRTDP : XX2Form<60, 75,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xssqrtdp $XT, $XB", IIC_FPSqrtD,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set f64:$XT, (fsqrt f64:$XB))]>;
def XSREDP : XX2Form<60, 90,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsredp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfre f64:$XB))]>;
def XSRSQRTEDP : XX2Form<60, 74,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrsqrtedp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfrsqrte f64:$XB))]>;
def XSTDIVDP : XX3Form_1<60, 61,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs crrc:$crD), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xstdivdp $crD, $XA, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSTSQRTDP : XX2Form_1<60, 106,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs crrc:$crD), (ins vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xstsqrtdp $crD, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVDIVDP : XX3Form<60, 120,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvdivdp $XT, $XA, $XB", IIC_FPDivD,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set v2f64:$XT, (fdiv v2f64:$XA, v2f64:$XB))]>;
def XVDIVSP : XX3Form<60, 88,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvdivsp $XT, $XA, $XB", IIC_FPDivS,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set v4f32:$XT, (fdiv v4f32:$XA, v4f32:$XB))]>;
def XVSQRTDP : XX2Form<60, 203,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvsqrtdp $XT, $XB", IIC_FPSqrtD,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set v2f64:$XT, (fsqrt v2f64:$XB))]>;
def XVSQRTSP : XX2Form<60, 139,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvsqrtsp $XT, $XB", IIC_FPSqrtS,
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
[(set v4f32:$XT, (fsqrt v4f32:$XB))]>;
def XVTDIVDP : XX3Form_1<60, 125,
(outs crrc:$crD), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvtdivdp $crD, $XA, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVTDIVSP : XX3Form_1<60, 93,
(outs crrc:$crD), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvtdivsp $crD, $XA, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVTSQRTDP : XX2Form_1<60, 234,
(outs crrc:$crD), (ins vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvtsqrtdp $crD, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVTSQRTSP : XX2Form_1<60, 170,
(outs crrc:$crD), (ins vsrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xvtsqrtsp $crD, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVREDP : XX2Form<60, 218,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvredp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (PPCfre v2f64:$XB))]>;
def XVRESP : XX2Form<60, 154,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvresp $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (PPCfre v4f32:$XB))]>;
def XVRSQRTEDP : XX2Form<60, 202,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrsqrtedp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (PPCfrsqrte v2f64:$XB))]>;
def XVRSQRTESP : XX2Form<60, 138,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrsqrtesp $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (PPCfrsqrte v4f32:$XB))]>;
// Compare Instructions
def XSCMPODP : XX3Form_1<60, 43,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs crrc:$crD), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xscmpodp $crD, $XA, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCMPUDP : XX3Form_1<60, 35,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs crrc:$crD), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] VSX instruction latency corrections The vector divide and sqrt instructions have high latencies, and the scalar comparisons are like all of the others. On the P7, permutations take an extra cycle over purely-simple vector ops. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205096 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 13:20:31 +00:00
"xscmpudp $crD, $XA, $XB", IIC_FPCompare, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
defm XVCMPEQDP : XX3Form_Rcr<60, 99,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpeqdp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
defm XVCMPEQSP : XX3Form_Rcr<60, 67,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpeqsp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
defm XVCMPGEDP : XX3Form_Rcr<60, 115,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpgedp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
defm XVCMPGESP : XX3Form_Rcr<60, 83,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpgesp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
defm XVCMPGTDP : XX3Form_Rcr<60, 107,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpgtdp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
defm XVCMPGTSP : XX3Form_Rcr<60, 75,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcmpgtsp", "$XT, $XA, $XB", IIC_VecFPCompare, []>;
// Move Instructions
def XSABSDP : XX2Form<60, 345,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsabsdp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (fabs f64:$XB))]>;
def XSNABSDP : XX2Form<60, 361,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnabsdp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (fneg (fabs f64:$XB)))]>;
def XSNEGDP : XX2Form<60, 377,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsnegdp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (fneg f64:$XB))]>;
def XSCPSGNDP : XX3Form<60, 176,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xscpsgndp $XT, $XA, $XB", IIC_VecFP,
[(set f64:$XT, (fcopysign f64:$XB, f64:$XA))]>;
def XVABSDP : XX2Form<60, 473,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvabsdp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (fabs v2f64:$XB))]>;
def XVABSSP : XX2Form<60, 409,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvabssp $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (fabs v4f32:$XB))]>;
def XVCPSGNDP : XX3Form<60, 240,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcpsgndp $XT, $XA, $XB", IIC_VecFP,
[(set v2f64:$XT, (fcopysign v2f64:$XB, v2f64:$XA))]>;
def XVCPSGNSP : XX3Form<60, 208,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvcpsgnsp $XT, $XA, $XB", IIC_VecFP,
[(set v4f32:$XT, (fcopysign v4f32:$XB, v4f32:$XA))]>;
def XVNABSDP : XX2Form<60, 489,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvnabsdp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (fneg (fabs v2f64:$XB)))]>;
def XVNABSSP : XX2Form<60, 425,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvnabssp $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (fneg (fabs v4f32:$XB)))]>;
def XVNEGDP : XX2Form<60, 505,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvnegdp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (fneg v2f64:$XB))]>;
def XVNEGSP : XX2Form<60, 441,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvnegsp $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (fneg v4f32:$XB))]>;
// Conversion Instructions
def XSCVDPSP : XX2Form<60, 265,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xscvdpsp $XT, $XB", IIC_VecFP, []>;
def XSCVDPSXDS : XX2Form<60, 344,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvdpsxds $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfctidz f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCVDPSXWS : XX2Form<60, 88,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvdpsxws $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfctiwz f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCVDPUXDS : XX2Form<60, 328,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvdpuxds $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfctiduz f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCVDPUXWS : XX2Form<60, 72,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvdpuxws $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfctiwuz f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCVSPDP : XX2Form<60, 329,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xscvspdp $XT, $XB", IIC_VecFP, []>;
def XSCVSXDDP : XX2Form<60, 376,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvsxddp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfcfid f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSCVUXDDP : XX2Form<60, 360,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Make use of VSX f64 <-> i64 conversion instructions When VSX is available, these instructions should be used in preference to the older variants that only have access to the scalar floating-point registers. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-23 05:35:00 +00:00
"xscvuxddp $XT, $XB", IIC_VecFP,
[(set f64:$XT, (PPCfcfidu f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVCVDPSP : XX2Form<60, 393,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvdpsp $XT, $XB", IIC_VecFP, []>;
def XVCVDPSXDS : XX2Form<60, 472,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] Use v2f64 <-> v2i64 VSX conversion instructions git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204843 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 19:13:54 +00:00
"xvcvdpsxds $XT, $XB", IIC_VecFP,
[(set v2i64:$XT, (fp_to_sint v2f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVCVDPSXWS : XX2Form<60, 216,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvdpsxws $XT, $XB", IIC_VecFP, []>;
def XVCVDPUXDS : XX2Form<60, 456,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] Use v2f64 <-> v2i64 VSX conversion instructions git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204843 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 19:13:54 +00:00
"xvcvdpuxds $XT, $XB", IIC_VecFP,
[(set v2i64:$XT, (fp_to_uint v2f64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVCVDPUXWS : XX2Form<60, 200,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvdpuxws $XT, $XB", IIC_VecFP, []>;
def XVCVSPDP : XX2Form<60, 457,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvspdp $XT, $XB", IIC_VecFP, []>;
def XVCVSPSXDS : XX2Form<60, 408,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvspsxds $XT, $XB", IIC_VecFP, []>;
def XVCVSPSXWS : XX2Form<60, 152,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvspsxws $XT, $XB", IIC_VecFP, []>;
def XVCVSPUXDS : XX2Form<60, 392,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvspuxds $XT, $XB", IIC_VecFP, []>;
def XVCVSPUXWS : XX2Form<60, 136,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvspuxws $XT, $XB", IIC_VecFP, []>;
def XVCVSXDDP : XX2Form<60, 504,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] Use v2f64 <-> v2i64 VSX conversion instructions git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204843 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 19:13:54 +00:00
"xvcvsxddp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (sint_to_fp v2i64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVCVSXDSP : XX2Form<60, 440,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvsxdsp $XT, $XB", IIC_VecFP, []>;
def XVCVSXWDP : XX2Form<60, 248,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvsxwdp $XT, $XB", IIC_VecFP, []>;
def XVCVSXWSP : XX2Form<60, 184,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvsxwsp $XT, $XB", IIC_VecFP, []>;
def XVCVUXDDP : XX2Form<60, 488,
(outs vsrc:$XT), (ins vsrc:$XB),
[PowerPC] Use v2f64 <-> v2i64 VSX conversion instructions git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204843 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 19:13:54 +00:00
"xvcvuxddp $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (uint_to_fp v2i64:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XVCVUXDSP : XX2Form<60, 424,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvuxdsp $XT, $XB", IIC_VecFP, []>;
def XVCVUXWDP : XX2Form<60, 232,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvuxwdp $XT, $XB", IIC_VecFP, []>;
def XVCVUXWSP : XX2Form<60, 168,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvcvuxwsp $XT, $XB", IIC_VecFP, []>;
// Rounding Instructions
def XSRDPI : XX2Form<60, 73,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrdpi $XT, $XB", IIC_VecFP,
[(set f64:$XT, (frnd f64:$XB))]>;
def XSRDPIC : XX2Form<60, 107,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrdpic $XT, $XB", IIC_VecFP,
[(set f64:$XT, (fnearbyint f64:$XB))]>;
def XSRDPIM : XX2Form<60, 121,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrdpim $XT, $XB", IIC_VecFP,
[(set f64:$XT, (ffloor f64:$XB))]>;
def XSRDPIP : XX2Form<60, 105,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrdpip $XT, $XB", IIC_VecFP,
[(set f64:$XT, (fceil f64:$XB))]>;
def XSRDPIZ : XX2Form<60, 89,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsrdpiz $XT, $XB", IIC_VecFP,
[(set f64:$XT, (ftrunc f64:$XB))]>;
def XVRDPI : XX2Form<60, 201,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrdpi $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (frnd v2f64:$XB))]>;
def XVRDPIC : XX2Form<60, 235,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrdpic $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (fnearbyint v2f64:$XB))]>;
def XVRDPIM : XX2Form<60, 249,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrdpim $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (ffloor v2f64:$XB))]>;
def XVRDPIP : XX2Form<60, 233,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrdpip $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (fceil v2f64:$XB))]>;
def XVRDPIZ : XX2Form<60, 217,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrdpiz $XT, $XB", IIC_VecFP,
[(set v2f64:$XT, (ftrunc v2f64:$XB))]>;
def XVRSPI : XX2Form<60, 137,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrspi $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (frnd v4f32:$XB))]>;
def XVRSPIC : XX2Form<60, 171,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrspic $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (fnearbyint v4f32:$XB))]>;
def XVRSPIM : XX2Form<60, 185,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrspim $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (ffloor v4f32:$XB))]>;
def XVRSPIP : XX2Form<60, 169,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrspip $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (fceil v4f32:$XB))]>;
def XVRSPIZ : XX2Form<60, 153,
(outs vsrc:$XT), (ins vsrc:$XB),
"xvrspiz $XT, $XB", IIC_VecFP,
[(set v4f32:$XT, (ftrunc v4f32:$XB))]>;
// Max/Min Instructions
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in {
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XSMAXDP : XX3Form<60, 160,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmaxdp $XT, $XA, $XB", IIC_VecFP, []>;
def XSMINDP : XX3Form<60, 168,
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
"xsmindp $XT, $XA, $XB", IIC_VecFP, []>;
def XVMAXDP : XX3Form<60, 224,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvmaxdp $XT, $XA, $XB", IIC_VecFP, []>;
def XVMINDP : XX3Form<60, 232,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvmindp $XT, $XA, $XB", IIC_VecFP, []>;
def XVMAXSP : XX3Form<60, 192,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvmaxsp $XT, $XA, $XB", IIC_VecFP, []>;
def XVMINSP : XX3Form<60, 200,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xvminsp $XT, $XA, $XB", IIC_VecFP, []>;
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
} // isCommutable
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
} // Uses = [RM]
// Logical Instructions
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XXLAND : XX3Form<60, 130,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] Generate logical vector VSX instructions These instructions are essentially the same as their Altivec counterparts, but have access to the larger VSX register file. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204782 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 04:55:40 +00:00
"xxland $XT, $XA, $XB", IIC_VecGeneral,
[(set v4i32:$XT, (and v4i32:$XA, v4i32:$XB))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XXLANDC : XX3Form<60, 138,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] Generate logical vector VSX instructions These instructions are essentially the same as their Altivec counterparts, but have access to the larger VSX register file. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204782 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 04:55:40 +00:00
"xxlandc $XT, $XA, $XB", IIC_VecGeneral,
[(set v4i32:$XT, (and v4i32:$XA,
(vnot_ppc v4i32:$XB)))]>;
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
let isCommutable = 1 in {
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XXLNOR : XX3Form<60, 162,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] Generate logical vector VSX instructions These instructions are essentially the same as their Altivec counterparts, but have access to the larger VSX register file. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204782 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 04:55:40 +00:00
"xxlnor $XT, $XA, $XB", IIC_VecGeneral,
[(set v4i32:$XT, (vnot_ppc (or v4i32:$XA,
v4i32:$XB)))]>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XXLOR : XX3Form<60, 146,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] Generate logical vector VSX instructions These instructions are essentially the same as their Altivec counterparts, but have access to the larger VSX register file. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204782 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 04:55:40 +00:00
"xxlor $XT, $XA, $XB", IIC_VecGeneral,
[(set v4i32:$XT, (or v4i32:$XA, v4i32:$XB))]>;
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
let isCodeGenOnly = 1 in
def XXLORf: XX3Form<60, 146,
(outs vsfrc:$XT), (ins vsfrc:$XA, vsfrc:$XB),
"xxlor $XT, $XA, $XB", IIC_VecGeneral, []>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def XXLXOR : XX3Form<60, 154,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
[PowerPC] Generate logical vector VSX instructions These instructions are essentially the same as their Altivec counterparts, but have access to the larger VSX register file. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204782 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 04:55:40 +00:00
"xxlxor $XT, $XA, $XB", IIC_VecGeneral,
[(set v4i32:$XT, (xor v4i32:$XA, v4i32:$XB))]>;
[PowerPC] Mark many instructions as commutative I'm under the impression that we used to infer the isCommutable flag from the instruction-associated pattern. Regardless, we don't seem to do this (at least by default) any more. I've gone through all of our instruction definitions, and marked as commutative all of those that should be trivial to commute (by exchanging the first two operands). There has been special code for the RL* instructions, and that's not changed. Before this change, we had the following commutative instructions: RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo XSADDDP XSMULDP XVADDDP XVADDSP XVMULDP XVMULSP After: ADD4 ADD4o ADD8 ADD8o ADDC ADDC8 ADDC8o ADDCo ADDE ADDE8 ADDE8o ADDEo AND AND8 AND8o ANDo CRAND CREQV CRNAND CRNOR CROR CRXOR EQV EQV8 EQV8o EQVo FADD FADDS FADDSo FADDo FMADD FMADDS FMADDSo FMADDo FMSUB FMSUBS FMSUBSo FMSUBo FMUL FMULS FMULSo FMULo FNMADD FNMADDS FNMADDSo FNMADDo FNMSUB FNMSUBS FNMSUBSo FNMSUBo MULHD MULHDU MULHDUo MULHDo MULHW MULHWU MULHWUo MULHWo MULLD MULLDo MULLW MULLWo NAND NAND8 NAND8o NANDo NOR NOR8 NOR8o NORo OR OR8 OR8o ORo RLDIMI RLDIMIo RLWIMI RLWIMI8 RLWIMI8o RLWIMIo VADDCUW VADDFP VADDSBS VADDSHS VADDSWS VADDUBM VADDUBS VADDUHM VADDUHS VADDUWM VADDUWS VAND VAVGSB VAVGSH VAVGSW VAVGUB VAVGUH VAVGUW VMADDFP VMAXFP VMAXSB VMAXSH VMAXSW VMAXUB VMAXUH VMAXUW VMHADDSHS VMHRADDSHS VMINFP VMINSB VMINSH VMINSW VMINUB VMINUH VMINUW VMLADDUHM VMULESB VMULESH VMULEUB VMULEUH VMULOSB VMULOSH VMULOUB VMULOUH VNMSUBFP VOR VXOR XOR XOR8 XOR8o XORo XSADDDP XSMADDADP XSMAXDP XSMINDP XSMSUBADP XSMULDP XSNMADDADP XSNMSUBADP XVADDDP XVADDSP XVMADDADP XVMADDASP XVMAXDP XVMAXSP XVMINDP XVMINSP XVMSUBADP XVMSUBASP XVMULDP XVMULSP XVNMADDADP XVNMADDASP XVNMSUBADP XVNMSUBASP XXLAND XXLNOR XXLOR XXLXOR This is a by-inspection change, and I'm not sure how to write a reliable test case. I would like advice on this, however. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204609 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-24 15:07:28 +00:00
} // isCommutable
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
// Permutation Instructions
def XXMRGHW : XX3Form<60, 18,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xxmrghw $XT, $XA, $XB", IIC_VecPerm, []>;
def XXMRGLW : XX3Form<60, 50,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB),
"xxmrglw $XT, $XA, $XB", IIC_VecPerm, []>;
def XXPERMDI : XX3Form_2<60, 10,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB, u2imm:$DM),
"xxpermdi $XT, $XA, $XB, $DM", IIC_VecPerm, []>;
def XXSEL : XX4Form<60, 3,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB, vsrc:$XC),
"xxsel $XT, $XA, $XB, $XC", IIC_VecPerm, []>;
def XXSLDWI : XX3Form_2<60, 2,
(outs vsrc:$XT), (ins vsrc:$XA, vsrc:$XB, u2imm:$SHW),
"xxsldwi $XT, $XA, $XB, $SHW", IIC_VecPerm, []>;
def XXSPLTW : XX2Form_2<60, 164,
(outs vsrc:$XT), (ins vsrc:$XB, u2imm:$UIM),
"xxspltw $XT, $XB, $UIM", IIC_VecPerm, []>;
} // neverHasSideEffects
} // AddedComplexity
def : InstAlias<"xvmovdp $XT, $XB",
(XVCPSGNDP vsrc:$XT, vsrc:$XB, vsrc:$XB)>;
def : InstAlias<"xvmovsp $XT, $XB",
(XVCPSGNSP vsrc:$XT, vsrc:$XB, vsrc:$XB)>;
def : InstAlias<"xxspltd $XT, $XB, 0",
(XXPERMDI vsrc:$XT, vsrc:$XB, vsrc:$XB, 0)>;
def : InstAlias<"xxspltd $XT, $XB, 1",
(XXPERMDI vsrc:$XT, vsrc:$XB, vsrc:$XB, 3)>;
def : InstAlias<"xxmrghd $XT, $XA, $XB",
(XXPERMDI vsrc:$XT, vsrc:$XA, vsrc:$XB, 0)>;
def : InstAlias<"xxmrgld $XT, $XA, $XB",
(XXPERMDI vsrc:$XT, vsrc:$XA, vsrc:$XB, 3)>;
def : InstAlias<"xxswapd $XT, $XB",
(XXPERMDI vsrc:$XT, vsrc:$XB, vsrc:$XB, 2)>;
let AddedComplexity = 400 in { // Prefer VSX patterns over non-VSX patterns.
def : Pat<(v2f64 (scalar_to_vector f64:$A)),
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(v2f64 (SUBREG_TO_REG (i64 1), $A, sub_64))>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def : Pat<(f64 (vector_extract v2f64:$S, 0)),
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(f64 (EXTRACT_SUBREG $S, sub_64))>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def : Pat<(f64 (vector_extract v2f64:$S, 1)),
[PowerPC] Add subregister classes for f64 VSX values We had stored both f64 values and v2f64, etc. values in the VSX registers. This worked, but was suboptimal because we would always spill 16-byte values even through we almost always had scalar 8-byte values. This resulted in an increase in stack-size use, extra memory bandwidth, etc. To fix this, I've added 64-bit subregisters of the Altivec registers, and combined those with the existing scalar floating-point registers to form a class of VSX scalar floating-point registers. The ABI code has also been enhanced to use this register class and some other necessary improvements have been made. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205075 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-29 05:29:01 +00:00
(f64 (EXTRACT_SUBREG (XXPERMDI $S, $S, 2), sub_64))>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
// Additional fnmsub patterns: -a*c + b == -(a*c - b)
def : Pat<(fma (fneg f64:$A), f64:$C, f64:$B),
(XSNMSUBADP $B, $C, $A)>;
def : Pat<(fma f64:$A, (fneg f64:$C), f64:$B),
(XSNMSUBADP $B, $C, $A)>;
def : Pat<(fma (fneg v2f64:$A), v2f64:$C, v2f64:$B),
(XVNMSUBADP $B, $C, $A)>;
def : Pat<(fma v2f64:$A, (fneg v2f64:$C), v2f64:$B),
(XVNMSUBADP $B, $C, $A)>;
def : Pat<(fma (fneg v4f32:$A), v4f32:$C, v4f32:$B),
(XVNMSUBASP $B, $C, $A)>;
def : Pat<(fma v4f32:$A, (fneg v4f32:$C), v4f32:$B),
(XVNMSUBASP $B, $C, $A)>;
[PowerPC] Add some missing VSX bitcast patterns git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205352 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-01 19:24:27 +00:00
def : Pat<(v2f64 (bitconvert v4f32:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def : Pat<(v2f64 (bitconvert v4i32:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
def : Pat<(v2f64 (bitconvert v8i16:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
def : Pat<(v2f64 (bitconvert v16i8:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
[PowerPC] Add some missing VSX bitcast patterns git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205352 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-01 19:24:27 +00:00
def : Pat<(v4f32 (bitconvert v2f64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
def : Pat<(v4i32 (bitconvert v2f64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
def : Pat<(v8i16 (bitconvert v2f64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
def : Pat<(v16i8 (bitconvert v2f64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
[PowerPC] Add some missing VSX bitcast patterns git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205352 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-01 19:24:27 +00:00
def : Pat<(v2i64 (bitconvert v4f32:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
[PowerPC] Add v2i64 as a legal VSX type v2i64 needs to be a legal VSX type because it is the SetCC result type from v2f64 comparisons. We need to expand all non-arithmetic v2i64 operations. This fixes the lowering for v2f64 VSELECT. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204828 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 16:12:58 +00:00
def : Pat<(v2i64 (bitconvert v4i32:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
def : Pat<(v2i64 (bitconvert v8i16:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
def : Pat<(v2i64 (bitconvert v16i8:$A)),
(COPY_TO_REGCLASS $A, VSRC)>;
[PowerPC] Add some missing VSX bitcast patterns git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205352 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-01 19:24:27 +00:00
def : Pat<(v4f32 (bitconvert v2i64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
[PowerPC] Add v2i64 as a legal VSX type v2i64 needs to be a legal VSX type because it is the SetCC result type from v2f64 comparisons. We need to expand all non-arithmetic v2i64 operations. This fixes the lowering for v2f64 VSELECT. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204828 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 16:12:58 +00:00
def : Pat<(v4i32 (bitconvert v2i64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
def : Pat<(v8i16 (bitconvert v2i64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
def : Pat<(v16i8 (bitconvert v2i64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
[PowerPC] Use VSX vector load/stores for v2[fi]64 These instructions have access to the complete VSX register file. In addition, they "swap" the order of the elements so that element 0 (the scalar part) comes first in memory and element 1 follows at a higher address. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204838 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-26 18:26:30 +00:00
def : Pat<(v2f64 (bitconvert v2i64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
def : Pat<(v2i64 (bitconvert v2f64:$A)),
(COPY_TO_REGCLASS $A, VRRC)>;
[PowerPC] Handle VSX v2i64 SIGN_EXTEND_INREG sitofp from v2i32 to v2f64 ends up generating a SIGN_EXTEND_INREG v2i64 node (and similarly for v2i16 and v2i8). Even though there are no sign-extension (or algebraic shifts) for v2i64 types, we can handle v2i32 sign extensions by converting two and from v2i64. The small trick necessary here is to shift the i32 elements into the right lanes before the i32 -> f64 step. This is because of the big Endian nature of the system, we need the i32 portion in the high word of the i64 elements. For v2i16 and v2i8 we can do the same, but we first use the default Altivec shift-based expansion from v2i16 or v2i8 to v2i32 (by casting to v4i32) and then apply the above procedure. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205146 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-30 13:22:59 +00:00
// sign extension patterns
// To extend "in place" from v2i32 to v2i64, we have input data like:
// | undef | i32 | undef | i32 |
// but xvcvsxwdp expects the input in big-Endian format:
// | i32 | undef | i32 | undef |
// so we need to shift everything to the left by one i32 (word) before
// the conversion.
def : Pat<(sext_inreg v2i64:$C, v2i32),
(XVCVDPSXDS (XVCVSXWDP (XXSLDWI $C, $C, 1)))>;
def : Pat<(v2f64 (sint_to_fp (sext_inreg v2i64:$C, v2i32))),
(XVCVSXWDP (XXSLDWI $C, $C, 1))>;
[PowerPC] Initial support for the VSX instruction set VSX is an ISA extension supported on the POWER7 and later cores that enhances floating-point vector and scalar capabilities. Among other things, this adds <2 x double> support and generally helps to reduce register pressure. The interesting part of this ISA feature is the register configuration: there are 64 new 128-bit vector registers, the 32 of which are super-registers of the existing 32 scalar floating-point registers, and the second 32 of which overlap with the 32 Altivec vector registers. This makes things like vector insertion and extraction tricky: this can be free but only if we force a restriction to the right register subclass when needed. A new "minipass" PPCVSXCopy takes care of this (although it could do a more-optimal job of it; see the comment about unnecessary copies below). Please note that, currently, VSX is not enabled by default when targeting anything because it is not yet ready for that. The assembler and disassembler are fully implemented and tested. However: - CodeGen support causes miscompiles; test-suite runtime failures: MultiSource/Benchmarks/FreeBench/distray/distray MultiSource/Benchmarks/McCat/08-main/main MultiSource/Benchmarks/Olden/voronoi/voronoi MultiSource/Benchmarks/mafft/pairlocalalign MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4 SingleSource/Benchmarks/CoyoteBench/almabench SingleSource/Benchmarks/Misc/matmul_f64_4x4 - The lowering currently falls back to using Altivec instructions far more than it should. Worse, there are some things that are scalarized through the stack that shouldn't be. - A lot of unnecessary copies make it past the optimizers, and this needs to be fixed. - Many more regression tests are needed. Normally, I'd fix these things prior to committing, but there are some students and other contributors who would like to work this, and so it makes sense to move this development process upstream where it can be subject to the regular code-review procedures. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00
} // AddedComplexity
} // HasVSX
Reference in New Issue Copy Permalink