llvm-6502/test/CodeGen/AMDGPU/indirect-addressing-si.ll

122 lines
4.4 KiB
LLVM
Raw Normal View History

; RUN: llc < %s -march=amdgcn -mcpu=SI -verify-machineinstrs | FileCheck %s
; RUN: llc < %s -march=amdgcn -mcpu=tonga -verify-machineinstrs | FileCheck %s
; Tests for indirect addressing on SI, which is implemented using dynamic
; indexing of vectors.
; CHECK-LABEL: {{^}}extract_w_offset:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; CHECK: s_mov_b32 m0
; CHECK-NEXT: v_movrels_b32_e32
define void @extract_w_offset(float addrspace(1)* %out, i32 %in) {
entry:
%0 = add i32 %in, 1
%1 = extractelement <4 x float> <float 1.0, float 2.0, float 3.0, float 4.0>, i32 %0
store float %1, float addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}extract_wo_offset:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; CHECK: s_mov_b32 m0
; CHECK-NEXT: v_movrels_b32_e32
define void @extract_wo_offset(float addrspace(1)* %out, i32 %in) {
entry:
%0 = extractelement <4 x float> <float 1.0, float 2.0, float 3.0, float 4.0>, i32 %in
store float %0, float addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}extract_neg_offset_sgpr:
; The offset depends on the register that holds the first element of the vector.
; CHECK: s_add_i32 m0, s{{[0-9]+}}, 0xfffffe{{[0-9a-z]+}}
; CHECK: v_movrels_b32_e32 v{{[0-9]}}, v0
define void @extract_neg_offset_sgpr(i32 addrspace(1)* %out, i32 %offset) {
entry:
%index = add i32 %offset, -512
%value = extractelement <4 x i32> <i32 0, i32 1, i32 2, i32 3>, i32 %index
store i32 %value, i32 addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}extract_neg_offset_vgpr:
; The offset depends on the register that holds the first element of the vector.
; CHECK: v_readfirstlane_b32
; CHECK: s_add_i32 m0, m0, 0xfffffe{{[0-9a-z]+}}
; CHECK-NEXT: v_movrels_b32_e32 v{{[0-9]}}, v0
; CHECK: s_cbranch_execnz
define void @extract_neg_offset_vgpr(i32 addrspace(1)* %out) {
entry:
%id = call i32 @llvm.r600.read.tidig.x() #1
%index = add i32 %id, -512
%value = extractelement <4 x i32> <i32 0, i32 1, i32 2, i32 3>, i32 %index
store i32 %value, i32 addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}insert_w_offset:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; CHECK: s_mov_b32 m0
; CHECK-NEXT: v_movreld_b32_e32
define void @insert_w_offset(float addrspace(1)* %out, i32 %in) {
entry:
%0 = add i32 %in, 1
%1 = insertelement <4 x float> <float 1.0, float 2.0, float 3.0, float 4.0>, float 5.0, i32 %0
%2 = extractelement <4 x float> %1, i32 2
store float %2, float addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}insert_wo_offset:
R600/SI: Change all instruction assembly names to lowercase. This matches the format produced by the AMD proprietary driver. //==================================================================// // Shell script for converting .ll test cases: (Pass the .ll files you want to convert to this script as arguments). //==================================================================// ; This was necessary on my system so that A-Z in sed would match only ; upper case. I'm not sure why. export LC_ALL='C' TEST_FILES="$*" MATCHES=`grep -v Patterns SIInstructions.td | grep -o '"[A-Z0-9_]\+["e]' | grep -o '[A-Z0-9_]\+' | sort -r` for f in $TEST_FILES; do # Check that there are SI tests: grep -q -e 'verde' -e 'bonaire' -e 'SI' -e 'tahiti' $f if [ $? -eq 0 ]; then for match in $MATCHES; do sed -i -e "s/\([ :]$match\)/\L\1/" $f done # Try to get check lines with partial instruction names sed -i 's/\(;[ ]*SI[A-Z\\-]*: \)\([A-Z_0-9]\+\)/\1\L\2/' $f fi done sed -i -e 's/bb0_1/BB0_1/g' ../../../test/CodeGen/R600/infinite-loop.ll sed -i -e 's/SI-NOT: bfe/SI-NOT: {{[^@]}}bfe/g'../../../test/CodeGen/R600/llvm.AMDGPU.bfe.*32.ll ../../../test/CodeGen/R600/sext-in-reg.ll sed -i -e 's/exp_IEEE/EXP_IEEE/g' ../../../test/CodeGen/R600/llvm.exp2.ll sed -i -e 's/numVgprs/NumVgprs/g' ../../../test/CodeGen/R600/register-count-comments.ll sed -i 's/\(; CHECK[-NOT]*: \)\([A-Z_0-9]\+\)/\1\L\2/' ../../../test/CodeGen/R600/select64.ll ../../../test/CodeGen/R600/sgpr-copy.ll //==================================================================// // Shell script for converting .td files (run this last) //==================================================================// export LC_ALL='C' sed -i -e '/Patterns/!s/\("[A-Z0-9_]\+[ "e]\)/\L\1/g' SIInstructions.td sed -i -e 's/"EXP/"exp/g' SIInstrInfo.td git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221350 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-05 14:50:53 +00:00
; CHECK: s_mov_b32 m0
; CHECK-NEXT: v_movreld_b32_e32
define void @insert_wo_offset(float addrspace(1)* %out, i32 %in) {
entry:
%0 = insertelement <4 x float> <float 1.0, float 2.0, float 3.0, float 4.0>, float 5.0, i32 %in
%1 = extractelement <4 x float> %0, i32 2
store float %1, float addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}insert_neg_offset_sgpr:
; The offset depends on the register that holds the first element of the vector.
; CHECK: s_add_i32 m0, s{{[0-9]+}}, 0xfffffe{{[0-9a-z]+}}
; CHECK: v_movreld_b32_e32 v0, v{{[0-9]}}
define void @insert_neg_offset_sgpr(i32 addrspace(1)* %in, <4 x i32> addrspace(1)* %out, i32 %offset) {
entry:
%index = add i32 %offset, -512
%value = insertelement <4 x i32> <i32 0, i32 1, i32 2, i32 3>, i32 5, i32 %index
store <4 x i32> %value, <4 x i32> addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}insert_neg_offset_vgpr:
; The offset depends on the register that holds the first element of the vector.
; CHECK: v_readfirstlane_b32
; CHECK: s_add_i32 m0, m0, 0xfffffe{{[0-9a-z]+}}
; CHECK-NEXT: v_movreld_b32_e32 v0, v{{[0-9]}}
; CHECK: s_cbranch_execnz
define void @insert_neg_offset_vgpr(i32 addrspace(1)* %in, <4 x i32> addrspace(1)* %out) {
entry:
%id = call i32 @llvm.r600.read.tidig.x() #1
%index = add i32 %id, -512
%value = insertelement <4 x i32> <i32 0, i32 1, i32 2, i32 3>, i32 5, i32 %index
store <4 x i32> %value, <4 x i32> addrspace(1)* %out
ret void
}
; CHECK-LABEL: {{^}}insert_neg_inline_offset_vgpr:
; The offset depends on the register that holds the first element of the vector.
; CHECK: v_readfirstlane_b32
; CHECK: s_add_i32 m0, m0, -{{[0-9]+}}
; CHECK-NEXT: v_movreld_b32_e32 v0, v{{[0-9]}}
; CHECK: s_cbranch_execnz
define void @insert_neg_inline_offset_vgpr(i32 addrspace(1)* %in, <4 x i32> addrspace(1)* %out) {
entry:
%id = call i32 @llvm.r600.read.tidig.x() #1
%index = add i32 %id, -16
%value = insertelement <4 x i32> <i32 0, i32 1, i32 2, i32 3>, i32 5, i32 %index
store <4 x i32> %value, <4 x i32> addrspace(1)* %out
ret void
}
declare i32 @llvm.r600.read.tidig.x() #1
attributes #1 = { nounwind readnone }