Rework a bit of the implementation of loop block rotation to not rely so

heavily on AnalyzeBranch. That routine doesn't behave as we want given
that rotation occurs mid-way through re-ordering the function. Instead
merely check that there are not unanalyzable branching constructs
present, and then reason about the CFG via successor lists. This
actually simplifies my mental model for all of this as well.

The concrete result is that we now will rotate more loop chains. I've
added a test case from Olden highlighting the effect. There is still
a bit more to do here though in order to regain all of the performance
in Olden.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145179 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is contained in:
Chandler Carruth 2011-11-27 09:22:53 +00:00
parent b5dd9de724
commit 2eb5a744b1
2 changed files with 70 additions and 22 deletions

View File

@ -585,12 +585,14 @@ void MachineBlockPlacement::rotateLoop(MachineLoop &L,
// We need to analyze the branch and determine if rotating the loop will
// completely remove a branch. We bail if the analysis fails or we don't find
// an unconditional backedge.
// an unconditional backedge. Note that this has to handle cases where the
// original order was rotated, and the chain has un-done it. As a result,
// there may not (yet) be the uncondiationl branch, but we can tell whether
// one will be added when updating the terminators.
SmallVector<MachineOperand, 4> Cond;
MachineBasicBlock *TBB = 0, *FBB = 0;
if (TII->AnalyzeBranch(*Latch, TBB, FBB, Cond) || !TBB || FBB || !Cond.empty())
if (TII->AnalyzeBranch(*Latch, TBB, FBB, Cond) || !Cond.empty())
return;
assert(TBB == Header && "Found backedge that doesn't go to the header!");
// Next we need to find a split point. This rotate algorithm is *very*
// narrow, and it only tries to do the rotate when it can find a split point
@ -604,27 +606,35 @@ void MachineBlockPlacement::rotateLoop(MachineLoop &L,
I != E; ++I) {
Cond.clear();
TBB = FBB = 0;
if (TII->AnalyzeBranch(**I, TBB, FBB, Cond) || !TBB || Cond.empty())
// Ensure that this is a block with a conditional branch which we can
// analyze and re-form after rotating the loop. While it might be tempting
// to use the TBB or FBB output parameters from this, they will often be
// lies as they are only correct after the terminators have been updated,
// and we are mid-chain formation.
if (TII->AnalyzeBranch(**I, TBB, FBB, Cond) || Cond.empty())
continue;
// Swap things so that the in-loop successor is always in FBB or is an
// implicit fallthrough.
if (FBB && !LoopBlockSet.count(FBB))
std::swap(TBB, FBB);
// Check that we actually have a loop exit branch.
// FIXME: We should probably just use the LoopInfo for this.
if (!LoopBlockSet.count(TBB) && (!FBB || !LoopBlockSet.count(FBB))) {
// This is a very arbitrary restriction, but it ensures we don't disrupt
// the existing chain layout. We insist that the in-loop successor is
// chained as a fallthrough successor (even if the branch hasn't been
// updated to reflect that yet).
if (FBB && FBB != *llvm::prior(I))
continue;
NewBottom = *I;
NewTop = *llvm::prior(I);
SplitIt = I.base();
break;
// See if this block is an exiting block from the loop. LoopInfo provides
// a nice API for this, but it's actuall N*M runtime where N is the number
// of blocks in the loop and M is the number of successors. We can
// eliminate the N by doing this ourselves.
// FIXME: The LoopInfo datastructure should be improved for these types of
// queries.
MachineBasicBlock *ExitB = 0;
for (MachineBasicBlock::succ_iterator SI = (*I)->succ_begin(), SE = (*I)->succ_end();
SI != SE; ++SI) {
if (!(*SI)->isLandingPad() && *SI != *I && !LoopBlockSet.count(*SI)) {
ExitB = *SI;
break;
}
}
if (!ExitB)
continue;
NewBottom = *I;
NewTop = *llvm::prior(I);
SplitIt = I.base();
break;
}
if (!NewBottom || !NewTop ||
SplitIt == LoopChain.end() || SplitIt == LoopChain.begin())

View File

@ -199,6 +199,44 @@ exit:
ret i32 %base
}
define void @test_loop_rotate_reversed_blocks() {
; This test case (greatly reduced from an Olden bencmark) ensures that the loop
; rotate implementation doesn't assume that loops are laid out in a particular
; order. The first loop will get split into two basic blocks, with the loop
; header coming after the loop latch.
;
; CHECK: test_loop_rotate_reversed_blocks
; CHECK: %entry
; Look for a jump into the middle of the loop, and no branches mid-way.
; CHECK: jmp
; CHECK: %loop1
; CHECK-NOT: j{{\w*}} .LBB{{.*}}
; CHECK: %loop1
; CHECK: je
entry:
%cond1 = load volatile i1* undef
br i1 %cond1, label %loop2.preheader, label %loop1
loop1:
call i32 @f()
%cond2 = load volatile i1* undef
br i1 %cond2, label %loop2.preheader, label %loop1
loop2.preheader:
call i32 @f()
%cond3 = load volatile i1* undef
br i1 %cond3, label %exit, label %loop2
loop2:
call i32 @f()
%cond4 = load volatile i1* undef
br i1 %cond4, label %exit, label %loop2
exit:
ret void
}
define i32 @test_loop_align(i32 %i, i32* %a) {
; Check that we provide basic loop body alignment with the block placement
; pass.
@ -567,8 +605,8 @@ define void @test_unnatural_cfg_backwards_inner_loop() {
; CHECK: test_unnatural_cfg_backwards_inner_loop
; CHECK: %entry
; CHECK: %body
; CHECK: %loop1
; CHECK: %loop2b
; CHECK: %loop1
; CHECK: %loop2a
entry: