this and have it in about the same form, I think this makes sense.
on X86, you do a RDTSC (64bit result, from any ring since the P5MMX)
on Alpha, you do a RDCC
on PPC, there is a sequence which may or may not work depending on how things
are setup by the OS. Or something like that. Maybe someone who knows PPC
can add support. Something about the time base register.
on Sparc, you read %tick, which in some solaris versions (>=8) is readable by
userspace
on IA64 read ar.itc
So I think the ulong is justified since all of those are 64bit.
Support is slighly flaky on old chips (P5 and lower) and sometimes
depends on OS (PPC, Sparc). But for modern OS/Hardware (aka this decade),
we should be ok.
I am still not sure what to do about lowering. I can either see a lower to 0, to
gettimeofday (or the target os equivalent), or loudly complaining and refusing to
continue.
I am commiting an Alpha implementation. I will add the X86 implementation if I
have to (I have use of it in the near future), but if someone who knows that
backend (and the funky multi-register results) better wants to add it, it would
take them a lot less time ;)
TODO: better lowering and legalizing, and support more platforms
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24299 91177308-0d34-0410-b5e6-96231b3b80d8
names. This also changes the default to allow all of "$_." in addition
to letters and numbers as symbol names. If you don't want this, use
markCharUnacceptable to remove one of these or markCharAcceptable to add
to the set. This corresponds with what GAS accepts by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24291 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't support .asciz, just set AscizDirective to null in your asmprinter.
This compiles C strings to:
l1__2E_str_1: ; '.str_1'
.asciz "foo"
instead of:
l1__2E_str_1: ; '.str_1'
.ascii "foo\000"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24271 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates the vector, allows constant time removal of a node from
a graph, and makes iteration over the all nodes list stable when adding
nodes to the graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24262 91177308-0d34-0410-b5e6-96231b3b80d8
allocated. Further, in the common case where a node has a single value, just
reference an element from a small array. This is a small compile-time wi.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24250 91177308-0d34-0410-b5e6-96231b3b80d8
This saves 12 bytes from SDNode, but doesn't speed things up substantially
(our graphs apparently already fit within the cache on my g5). In any case
this reduces memory usage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24248 91177308-0d34-0410-b5e6-96231b3b80d8
alignment information appropriately. Includes code for PowerPC to support
fixed-size allocas with alignment larger than the stack. Support for
arbitrarily aligned dynamic allocas coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24224 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for specifying alignment and size of setjmp jmpbufs.
No targets currently do anything with this information, nor is it presrved
in the bytecode representation. That's coming up next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24196 91177308-0d34-0410-b5e6-96231b3b80d8
Remove Function::aiterator and Module::giterator typedefs (and const versions)
as they should have been removed when abegin/gbegin were removed. Thanks to
alkis for bringing this to my attn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23978 91177308-0d34-0410-b5e6-96231b3b80d8
pointer marking the end of the list, the zero *must* be cast to the pointer
type. An un-cast zero is a 32-bit int, and at least on x86_64, gcc will
not extend the zero to 64 bits, thus allowing the upper 32 bits to be
random junk.
The new END_WITH_NULL macro may be used to annotate a such a function
so that GCC (version 4 or newer) will detect the use of un-casted zero
at compile time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23888 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new flag to TargetLowering indicating if the target has really cheap
signed division by powers of two, make ppc use it. This will probably go
away in the future.
Implement some more ISD::SDIV folds in the dag combiner
Remove now dead code in the x86 backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23853 91177308-0d34-0410-b5e6-96231b3b80d8
allows us to lower legal return types to something else, to meet ABI
requirements (such as that i64 be returned in two i32 regs on Darwin/ppc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23802 91177308-0d34-0410-b5e6-96231b3b80d8
This is Jim's feature implemented so that graphs could 'opt-in' and get
this behavior. This is currently used by selection dags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23576 91177308-0d34-0410-b5e6-96231b3b80d8
into the evaluator. This shrinks a release build of instcombine's text
section from 216363 to 215975 bytes (on PPC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23468 91177308-0d34-0410-b5e6-96231b3b80d8
a different enum value. This allows 'classof' for these to be really simple,
not needing to call getType() anymore.
This speeds up isa/dyncast/etc for constants, and also makes them smaller.
For example, the text section of a release build of InstCombine.cpp shrinks
from 230037 bytes to 216363 bytes, a 6% reduction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23466 91177308-0d34-0410-b5e6-96231b3b80d8
2. Propagate feature "string" to all targets.
3. Implement use of SubtargetFeatures in PowerPCTargetSubtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23192 91177308-0d34-0410-b5e6-96231b3b80d8
is to manage processor specific attributes from the command line. See examples
of use in llc/lli and PowerPCTargetSubtarget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23191 91177308-0d34-0410-b5e6-96231b3b80d8
be mostly functional. It currently has all folds from SelectionDAG.cpp
that do not involve a condition code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23184 91177308-0d34-0410-b5e6-96231b3b80d8
this, it is a requirement on PPC, which can have an f32 value in r3 at one
point in a function and a f64 value in r3 at another point. :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23160 91177308-0d34-0410-b5e6-96231b3b80d8
registers, and the incoming values have already been zero or sign extended
from the appopriate type to the register width.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23146 91177308-0d34-0410-b5e6-96231b3b80d8
putting it into the constant pool. This allows the isel machinery to
create constants that it will end up deciding are not needed, without them
ending up in the resultant function constant pool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23081 91177308-0d34-0410-b5e6-96231b3b80d8
These patches make threading optional in LLVM. The configuration scripts are now
modified to accept a --disable-threads switch. If this is used, the Mutex class
will be implemented with all functions as no-op. Furthermore, linking against
libpthread will not be done. Finally, the ParallelJIT example needs libpthread
so its makefile was changed to always add -lpthread to the link line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23003 91177308-0d34-0410-b5e6-96231b3b80d8
binary search to test for membership. This speeds up LLC a bit more on KC++,
e.g. on itanium from 16.6974s to 14.8272s, PPC from 11.4926s to 10.7089s and
X86 from 10.8128s to 9.7943s, with no difference in generated code (like all
of the RA patches).
With these changes, isel is the slowest pass for PPC/X86, but linscan+live
intervals is still > 50% of the compile time for itanium. More work could
be done, but this is the last for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22993 91177308-0d34-0410-b5e6-96231b3b80d8
rearrange some of the accessors to be more efficient.
This makes it much more efficient to iterate over all of the things with the
same value. This speeds up liveintervals analysis from 8.63s to 3.79s with
a release build of llc on kc++ with -march=ia64. This also speeds up live
var from 1.66s -> 0.87s as well, reducing total llc time from 20.1s->15.2s.
This also speeds up other targets slightly, e.g. llc time on X86 from 16.84
-> 16.45s, and PPC from 17.64->17.03s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22990 91177308-0d34-0410-b5e6-96231b3b80d8
is greater than the range of building selection dag node types, and
getTargetOpcode(), which returns the node opcode less the value of
isd::builtin_op_end, which specifies the end of the builtin types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22844 91177308-0d34-0410-b5e6-96231b3b80d8
used to tack a register number onto the node.
Instead of doing this, make a new node, RegisterSDNode, which is a leaf
containing a register number. These three operations just become normal
DAG nodes now, instead of requiring special handling.
Note that with this change, it is no longer correct to make illegal
CopyFromReg/CopyToReg nodes. The legalizer will not touch them, and this
is bad, so don't do it. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22806 91177308-0d34-0410-b5e6-96231b3b80d8
out into SimplifySelectCC. This allows both ISD::SELECT and ISD::SELECT_CC
to use the same set of simplifying folds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22779 91177308-0d34-0410-b5e6-96231b3b80d8
1. move assertions for node creation to getNode()
2. legalize the values returned in ExpandOp immediately
3. Move select_cc optimizations from SELECT's getNode() to SELECT_CC's,
allowing them to be cleaned up significantly.
This paves the way to pick up additional optimizations on SELECT_CC, such
as sum-of-absolute-differences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22757 91177308-0d34-0410-b5e6-96231b3b80d8
CC out of the SetCC operation, making SETCC a standard ternary operation and
CC's a standard DAG leaf. This will make it possible for other node to use
CC's as operands in the future...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22728 91177308-0d34-0410-b5e6-96231b3b80d8
to pass it in. Also, since it always returns a non-null pointer, make it
return a reference instead for easier use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22686 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlock's removePredecessor routine. This requires shuffling around
the definition and implementation of hasContantValue from Utils.h,cpp into
Instructions.h,cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22664 91177308-0d34-0410-b5e6-96231b3b80d8
near the GOT, which new doesn't do. So break out the allocate into a new function.
Also move GOT index handling into JITResolver. This lets it update the mapping when a Lazy
function is JITed. It doesn't managed the table, just the mapping. Note that this is
still non-ideal, as any function that takes a function address should also take a GOT
index, but that is a lot of changes. The relocation resolve process updates any GOT entry
it sees is out of date.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22537 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the script assumed the version number was the last field, now
it assumes it is the first sequence of digits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22527 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first incremental patch to implement this feature. It adds no
functionality to LLVM but setup up the information needed from targets in
order to implement the optimization correctly. Each target needs to specify
the maximum number of store operations for conversion of the llvm.memset,
llvm.memcpy, and llvm.memmove intrinsics into a sequence of store operations.
The limit needs to be chosen at the threshold of performance for such an
optimization (generally smallish). The target also needs to specify whether
the target can support unaligned stores for multi-byte store operations.
This helps ensure the optimization doesn't generate code that will trap on
an alignment errors.
More patches to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22468 91177308-0d34-0410-b5e6-96231b3b80d8
vector that represents the .o file at once, build up a vector for each
section of the .o file. This is needed because the .o file writer needs
to be able to switch between sections as it emits them (e.g. switch
between the .text section and the .rel section when emitting code).
This patch has no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22453 91177308-0d34-0410-b5e6-96231b3b80d8
we actually get the path and not $GRAPHVIZ as the value.
* Add a #define for the gv program (HAVE_GV) and its value LLVM_PATH_GV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22433 91177308-0d34-0410-b5e6-96231b3b80d8
GRAPHVIZ will contain the path to the program if its found (or "echo Graphviz"
if not) and the #define HAVE_GRAPHVIZ will be defined if its found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22424 91177308-0d34-0410-b5e6-96231b3b80d8
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22404 91177308-0d34-0410-b5e6-96231b3b80d8
Add a Mutex class for thread synchronization in a platform-independent way.
The current implementation only supports pthreads. Win32 use of Critical
Sections will be added later. The design permits other threading models to
be used if (and only if) pthreads is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22403 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the X86 Subtarget.
This consolidates the checks for target triple, and setting options based
on target triple into one place. This allows us to convert the asm printer
and isel over from being littered with "forDarwin", "forCygwin", etc. into
just having the appropriate flags for each subtarget feature controlling
the code for that feature.
This patch also implements indirect external and weak references in the
X86 pattern isel, for darwin. Next up is to convert over the asm printers
to use this new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22389 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last MVTSDNode.
This allows us to eliminate a bunch of special case code for handling
MVTSDNodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22367 91177308-0d34-0410-b5e6-96231b3b80d8
MVTSDNode class. This class is used to provide an operand to operators
that require an extra type. We start by converting FP_ROUND_INREG and
SIGN_EXTEND_INREG over to using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22364 91177308-0d34-0410-b5e6-96231b3b80d8
This chagne just renames some sys::Path methods to ensure they are not
misused. The Path documentation now divides methods into two dimensions:
Path/Disk and accessor/mutator. Path accessors and mutators only operate
on the Path object itself without making any disk accesses. Disk accessors
and mutators will also access or modify the file system. Because of the
potentially destructive nature of disk mutators, it was decided that all
such methods should end in the work "Disk" to ensure the user recognizes
that the change will occur on the file system. This patch makes that
change. The method name changes are:
makeReadable -> makeReadableOnDisk
makeWriteable -> makeWriteableOnDisk
makeExecutable -> makeExecutableOnDisk
setStatusInfo -> setStatusInfoOnDisk
createDirectory -> createDirectoryOnDisk
createFile -> createFileOnDisk
createTemporaryFile -> createTemporaryFileOnDisk
destroy -> eraseFromDisk
rename -> renamePathOnDisk
These changes pass the Linux Deja Gnu tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22354 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of the difference between file paths and directory paths. The Path
class now simply stores a path that can refer to either a file or a
directory. This required various changes in the implementation and interface
of the class with the corresponding impact to its users. Doxygen comments were
also updated to reflect these changes. Interface changes are:
appendDirectory -> appendComponent
appendFile -> appendComponent
elideDirectory -> eraseComponent
elideFile -> eraseComponent
elideSuffix -> eraseSuffix
renameFile -> rename
setDirectory -> set
setFile -> set
Changes pass Dejagnu and llvm-test/SingleSource tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22349 91177308-0d34-0410-b5e6-96231b3b80d8
1. Pass Value*'s into lowering methods so that the proper pointers can be
added to load/stores from the valist
2. Intrinsics that return void should only return a token chain, not a token
chain/retval pair.
3. Rename LowerVAArgNext -> LowerVAArg, because VANext is long gone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22338 91177308-0d34-0410-b5e6-96231b3b80d8
For now, the elf writer is only capable of emitting an empty elf file, with
a section table and a section table string table. This will be enhanced
in the future :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22290 91177308-0d34-0410-b5e6-96231b3b80d8
enhancement for ffs, ffsl, and ffsll optimizations. We can't do the opt
unless we also have the at least ffsll function. Notably SVR4 doesn't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22033 91177308-0d34-0410-b5e6-96231b3b80d8
population (ctpop). Generic lowering is implemented, however only promotion
is implemented for SelectionDAG at the moment.
More coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21676 91177308-0d34-0410-b5e6-96231b3b80d8
(TRUNK)Stores and (EXT|ZEXT|SEXT)Loads have an extra SDOperand which is a SrcValueSDNode which contains the Value*. Note that if the operation is introduced by the backend, it will still have the operand, but the value* will be null.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21599 91177308-0d34-0410-b5e6-96231b3b80d8
compilation. This change has been waiting in the wings for a long time but
since Misha just did a global change, I figured now was the time to commit
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21431 91177308-0d34-0410-b5e6-96231b3b80d8
Add new ppc beta option related to using condition registers
Make pattern isel control flag (-enable-pattern-isel) global and tristate
0 == off
1 == on
2 == target default
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21309 91177308-0d34-0410-b5e6-96231b3b80d8
