of value info (sign/zero ext info) from one MBB to another. This doesn't
handle much right now because of two limitations:
1) only handles zext/sext, not random bit propagation (no assert exists
for this)
2) doesn't handle phis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52383 91177308-0d34-0410-b5e6-96231b3b80d8
I'm at it, rename it to FindInsertedValue.
The only functional change is that newly created instructions are no longer
added to instcombine's worklist, but that is not really necessary anyway (and
I'll commit some improvements next that will completely remove the need).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52315 91177308-0d34-0410-b5e6-96231b3b80d8
still excluding types like i1 (not byte sized)
and i120 (loading an i120 requires loading an i64,
an i32, an i16 and an i8, which is expensive).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52310 91177308-0d34-0410-b5e6-96231b3b80d8
take into account the instrucion pointed by InsertPt. Thanks to it,
returning the new value of InsertPt to the InsertBinop() caller can be
avoided. The bug was, actually, in visitAddRecExpr() method which wasn't
correctly handling changes of InsertPt. There shouldn't be any
performance regression, as -gvn pass (run after -indvars) removes any
redundant binops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52291 91177308-0d34-0410-b5e6-96231b3b80d8
wrong for volatile loads and stores. In fact this
is almost all of them! There are three types of
problems: (1) it is wrong to change the width of
a volatile memory access. These may be used to
do memory mapped i/o, in which case a load can have
an effect even if the result is not used. Consider
loading an i32 but only using the lower 8 bits. It
is wrong to change this into a load of an i8, because
you are no longer tickling the other three bytes. It
is also unwise to make a load/store wider. For
example, changing an i16 load into an i32 load is
wrong no matter how aligned things are, since the
fact of loading an additional 2 bytes can have
i/o side-effects. (2) it is wrong to change the
number of volatile load/stores: they may be counted
by the hardware. (3) it is wrong to change a volatile
load/store that requires one memory access into one
that requires several. For example on x86-32, you
can store a double in one processor operation, but to
store an i64 requires two (two i32 stores). In a
multi-threaded program you may want to bitcast an i64
to a double and store as a double because that will
occur atomically, and be indivisible to other threads.
So it would be wrong to convert the store-of-double
into a store of an i64, because this will become two
i32 stores - no longer atomic. My policy here is
to say that the number of processor operations for
an illegal operation is undefined. So it is alright
to change a store of an i64 (requires at least two
stores; but could be validly lowered to memcpy for
example) into a store of double (one processor op).
In short, if the new store is legal and has the same
size then I say that the transform is ok. It would
also be possible to say that transforms are always
ok if before they were illegal, whether after they
are illegal or not, but that's more awkward to do
and I doubt it buys us anything much.
However this exposed an interesting thing - on x86-32
a store of i64 is considered legal! That is because
operations are marked legal by default, regardless of
whether the type is legal or not. In some ways this
is clever: before type legalization this means that
operations on illegal types are considered legal;
after type legalization there are no illegal types
so now operations are only legal if they really are.
But I consider this to be too cunning for mere mortals.
Better to do things explicitly by testing AfterLegalize.
So I have changed things so that operations with illegal
types are considered illegal - indeed they can never
map to a machine operation. However this means that
the DAG combiner is more conservative because before
it was "accidentally" performing transforms where the
type was illegal because the operation was nonetheless
marked legal. So in a few such places I added a check
on AfterLegalize, which I suppose was actually just
forgotten before. This causes the DAG combiner to do
slightly more than it used to, which resulted in the X86
backend blowing up because it got a slightly surprising
node it wasn't expecting, so I tweaked it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52254 91177308-0d34-0410-b5e6-96231b3b80d8
with code that was expecting different bit widths for different values.
Make getTruncateOrZeroExtend a method on ScalarEvolution, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52248 91177308-0d34-0410-b5e6-96231b3b80d8
maps can be deleted. This happens when RAUW
replaces a node N with another equivalent node
E, deleting the first node. Solve this by
adding (N, E) to ReplacedNodes, which is already
used to remap nodes to replacements. This means
that deleted nodes are being allowed in maps,
which can be delicate: the memory may be reused
for a new node which might get confused with the
old deleted node pointer hanging around in the
maps, so detect this and flush out maps if it
occurs (ExpungeNode). The expunging operation
is expensive, however it never occurs during
a llvm-gcc bootstrap or anywhere in the nightly
testsuite. It occurs three times in "make check":
Alpha/illegal-element-type.ll,
PowerPC/illegal-element-type.ll and
X86/mmx-shift.ll. If expunging proves to be too
expensive then there are other more complicated
ways of solving the problem.
In the normal case this patch adds the overhead
of a few more map lookups, which is hopefully
negligable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52214 91177308-0d34-0410-b5e6-96231b3b80d8
of integer types. Fix the isMask APInt method to
actually work (hopefully) rather than crashing
because it adds apints of different bitwidths.
It looks like isShiftedMask is also broken, but
I'm leaving that one to the APInt people (it is
not used anywhere).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52142 91177308-0d34-0410-b5e6-96231b3b80d8
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52098 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
Add a Name argment to two init methods in these classes as well to make things
a bit more consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51937 91177308-0d34-0410-b5e6-96231b3b80d8
are the same as in unpacked structs, only field
positions differ. This only matters for structs
containing x86 long double or an apint; it may
cause backwards compatibility problems if someone
has bitcode containing a packed struct with a
field of one of those types.
The issue is that only 10 bytes are needed to
hold an x86 long double: the store size is 10
bytes, but the ABI size is 12 or 16 bytes (linux/
darwin) which comes from rounding the store size
up by the alignment. Because it seemed silly not
to pack an x86 long double into 10 bytes in a
packed struct, this is what was done. I now
think this was a mistake. Reserving the ABI size
for an x86 long double field even in a packed
struct makes things more uniform: the ABI size is
now always used when reserving space for a type.
This means that developers are less likely to
make mistakes. It also makes life easier for the
CBE which otherwise could not represent all LLVM
packed structs (PR2402).
Front-end people might need to adjust the way
they create LLVM structs - see following change
to llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51928 91177308-0d34-0410-b5e6-96231b3b80d8
out of instcombine into a new file in libanalysis. This also teaches
ComputeNumSignBits about the number of sign bits in a constantint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51863 91177308-0d34-0410-b5e6-96231b3b80d8
getSwappedPredicate, from ICmpInst and FCmpInst into common
methods in CmpInst. This allows CmpInsts to be manipulated
generically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51810 91177308-0d34-0410-b5e6-96231b3b80d8
insertvalue and extractvalue to use constant indices instead of
Value* indices. And begin updating LangRef.html.
There's definately more to come here, but I'm checking this
basic support in now to make it available to people who are
interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51806 91177308-0d34-0410-b5e6-96231b3b80d8
instruction to execute. This can be used for transformations (like two-address
conversion) to remat an instruction instead of generating a "move"
instruction. The idea is to decrease the live ranges and register pressure and
all that jazz.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51660 91177308-0d34-0410-b5e6-96231b3b80d8
the section or the visibility from one global
value to another: copyAttributesFrom. This is
particularly useful for duplicating functions:
previously this was done by explicitly copying
each attribute in turn at each place where a
new function was created out of an old one, with
the result that obscure attributes were regularly
forgotten (like the collector or the section).
Hopefully now everything is uniform and nothing
is forgotten.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51567 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis/ConstantFolding to fold ConstantExpr's, then make instcombine use it
to try to use targetdata to fold constant expressions on void instructions.
Also extend the icmp(inttoptr, inttoptr) folding to handle the case where
int size != ptr size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51559 91177308-0d34-0410-b5e6-96231b3b80d8
and bitcode support for the extractvalue and insertvalue
instructions and constant expressions.
Note that this does not yet include CodeGen support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51468 91177308-0d34-0410-b5e6-96231b3b80d8
that currently uses Type::isFirstClassType and depends on it
returning false for struct or array types.
This commit doesn't change the behavior of Type::isFirstClassType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51396 91177308-0d34-0410-b5e6-96231b3b80d8
they aren't in the header file, systems with a <string> header file that isn't
64-bit clean shouldn't warn if #including Path.h and specifying
-Wshorten-64-to-32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51393 91177308-0d34-0410-b5e6-96231b3b80d8
1. The "JITState" object creates a PassManager with the ModuleProvider that the
jit is created with. If the ModuleProvider is removed and deleted, the
PassManager is invalid.
2. The Global maps in the JIT were not invalidated with a ModuleProvider was
removed. This could lead to a case where the Module would be freed, and a
new Module with Globals at the same addresses could return invalid results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51384 91177308-0d34-0410-b5e6-96231b3b80d8
