This patch wires up the SystemZ target in configure, so that it can now be
built using --enable-targets=systemz. It is not yet included in the default
build (--enable-targets=all); this will be done by a follow-up patch.
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181208 91177308-0d34-0410-b5e6-96231b3b80d8
The intended semantics mirror autoconf, where the user is able to
specify a host triple, but if it's left to the build system then
"config.guess" is invoked for the default.
This also renames the LLVM_HOSTTRIPLE define to LLVM_HOST_TRIPLE to
fit in with the style of the surrounding defines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181112 91177308-0d34-0410-b5e6-96231b3b80d8
This makes llvm-dwarfdump and llvm-symbolizer understand
debug info sections compressed by ld.gold linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180088 91177308-0d34-0410-b5e6-96231b3b80d8
to have them appear in the right order. Instead append all warnings explicitly
to the language flags. This was already the case for many warnings. Fixes the
issue of -Wno-maybe-uninitialized not being effective because -Wall was being
placed after it rather than before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177866 91177308-0d34-0410-b5e6-96231b3b80d8
it. NetBSD/ARM and TILE-Gx are examples for platforms that have an
unusable fenv.h and this avoids the need for a blacklist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177865 91177308-0d34-0410-b5e6-96231b3b80d8
CMake and autotools disagree on what "host" means in a cross-compilation
context. Autotools (and lit) take it to be the machine the binaries being
compiled now will run on. CMake takes it to be the machine actually compiling
the binaries now.
This change makes lit.site-cfg more consistent between autotools and CMake,
allowing lit tests (particularly in ExecutionEngine) to run correctly when
cross-compiled with CMake
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175179 91177308-0d34-0410-b5e6-96231b3b80d8
check_cxx_symbol_exists requires CMake 2.8.6, so even though I
recommended it to Owen it's probably better to stay away for now.
This check is not technically correct because we're checking <math.h>
but then using <cmath> in the actual code, but if we run into problems we
can do the same sort of dance as isinf() and isnan() where we check /both/
headers and then write a wrapper header around them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174773 91177308-0d34-0410-b5e6-96231b3b80d8
Added support to the cmake build to turn off uninitialized use warnings
for gcc. This cleans the build up somewhat.
Used logic simpler than found in autoconf by making use of the fact that
although gcc won't complain about unsupported -Wno-* flags it *will*
complain about unsupported -W flags.
Reviewers: gribozavr, doug.gregor, chandlerc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174299 91177308-0d34-0410-b5e6-96231b3b80d8
catches uses of an extremely minor and widely-available C++ extension (which
every C++ compiler I could find supports, but EDG and Clang reject in strict
mode).
The diagnosed code pattern looks like this:
struct X {
union {
struct {
int a;
int b;
} S;
};
};
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174103 91177308-0d34-0410-b5e6-96231b3b80d8
gcc produces false positives for empty braces so turning the warning off.
Instead, turning the warning on for clang so proper warnings aren't missed.
Reviewers: dblaikie, chandlerc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174073 91177308-0d34-0410-b5e6-96231b3b80d8
For example,
cur) unittests/ADT/Release/ADTTests
new) unittests/ADT/ADTTests
RUNTIME_BUILD_MODE can be substituted to CMAKE_CFG_INTDIR.
With Make and Ninja, the tree is not built with multiple configurations.
Then, including the build type in target directory doesn't make sense.
See also "How can I build multiple modes without switching?"
http://www.cmake.org/Wiki/CMake_FAQ
CMAKE_CFG_INTDIR is set to "."
With multiple-configuration-aware build system, like Visual Studio, each unittest is built on appropriate directory, for example,
unittests/ADT/Release/ADTTests.exe
CMAKE_CFG_INTDIR is set to build system's variable, like "$(Configuration)" or "$(OutDir)".
Thus, "--param build_config" is also deprecated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173616 91177308-0d34-0410-b5e6-96231b3b80d8
This warning fires on:
Operator::~Operator() {
llvm_unreachable("should never destroy an Operator");
}
That seems like a false positive. I don't see any good way to silence
the warning here, so I'm disabling it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173455 91177308-0d34-0410-b5e6-96231b3b80d8
wall time, user time, and system time since a process started.
For walltime, we currently use TimeValue's interface and a global
initializer to compute a close approximation of total process runtime.
For user time, this adds support for an somewhat more precise timing
mechanism -- clock_gettime with the CLOCK_PROCESS_CPUTIME_ID clock
selected.
For system time, we have to do a full getrusage call to extract the
system time from the OS. This is expensive but unavoidable.
In passing, clean up the implementation of the old APIs and fix some
latent bugs in the Windows code. This might have manifested on Windows
ARM systems or other systems with strange 64-bit integer behavior.
The old API for this both user time and system time simultaneously from
a single getrusage call. While this results in fewer system calls, it
also results in a lower precision user time and if only user time is
desired, it introduces a higher overhead. It may be worthwhile to switch
some of the pass timers to not track system time and directly track user
and wall time. The old API also tracked walltime in a confusing way --
it just set it to the current walltime rather than providing any measure
of wall time since the process started the way buth user and system time
are tracked. The new API is more consistent here.
The plan is to eventually implement these methods for a *child* process
by using the wait3(2) system call to populate an rusage struct
representing the whole subprocess execution. That way, after waiting on
a child process its stats will become accurate and cheap to query.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171551 91177308-0d34-0410-b5e6-96231b3b80d8
"check-all" can be executed with 0 status, "check-all does nothing, no tools built."
LLVM_EXTERNAL_CLANG_BUILD=OFF LLVM_BUILD_TOOLS=OFF can reproduce this.
Oscar Fuentes reported this. Thank you.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171046 91177308-0d34-0410-b5e6-96231b3b80d8
If the local checkout does not have 'git svn' references set up, don't try
to use 'git svn' for version information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169749 91177308-0d34-0410-b5e6-96231b3b80d8
Adding CXX_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG
C_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG
This is to handle the wackiness on a Mac host where cmake detects:
CMAKE_CXX_COMPILER == "/usr/bin/c++"
CMAKE_C_COMPILER == "/usr/bin/gcc"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168577 91177308-0d34-0410-b5e6-96231b3b80d8
- Substitute hyphen to underscore, s/-/_/g, as the variable name.
- Additional parameter can be specified as the name of directory.
e.g.) add_llvm_external_project(clang-tools-extra extra)
- LLVM_EXTERNAL_CLANG_TOOLS_EXTRA_SOURCE_DIR=/path/to/llvm-srcroot/tools/clang/tools/extra, by default.
- Build directory is in ${CMAKE_CURRENT_BINARY_DIR}/extra
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165311 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows us to use cmake to specify a cross compiler: target different
than host. In particular, it moves LLVM_DEFAULT_TARGET_TRIPLE and TARGET_TRIPLE
variables from cmake/config-ix.cmake to the toplevel CMakeLists.txt to make them
available at configure time.
Here is the command line that I have used to test my patches to create a Hexagon
cross compiler hosted on x86:
$ cmake -G Ninja -D LLVM_TARGETS_TO_BUILD:STRING=Hexagon -D TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_DEFAULT_TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_TARGET_ARCH:STRING=hexagon-unknown-linux-gnu ..
$ ninja check
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162219 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows us to use cmake to specify a cross compiler for Hexagon.
In particular, the patch adds a missing case for the target Hexagon in
cmake/config-ix.cmake, and it moves LLVM_DEFAULT_TARGET_TRIPLE and TARGET_TRIPLE
variables from cmake/config-ix.cmake to the toplevel CMakeLists.txt to make them
available at configure time. Here is the command line that I have used to test
my patches:
$ cmake -G Ninja -D BUILD_SHARED_LIBS:BOOL=ON -D LLVM_TARGETS_TO_BUILD:STRING=Hexagon -D TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_DEFAULT_TARGET_TRIPLE:STRING=hexagon-unknown-linux-gnu -D LLVM_TARGET_ARCH:STRING=hexagon-unknown-linux-gnu -D LLVM_ENABLE_PIC:BOOL=OFF ..
$ ninja check
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161504 91177308-0d34-0410-b5e6-96231b3b80d8
in the abstraction for lit test suites so that the various other layers
of abstraction pick up the same behavioral fix, and so that we still get
a complete list of dependencies for the 'check-all' target.
This should fix the follow-on issues of the same nature with various
other build targets, including Clang targets. Sorry for the churn, and
again thanks to Matt for testing and breaking this more thoroughly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159593 91177308-0d34-0410-b5e6-96231b3b80d8
due to strange scoping rules to the actual canonical variable name
within the LLVM CMake build.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159575 91177308-0d34-0410-b5e6-96231b3b80d8
re-used. Also, build in direct support for accumulating a set of lit
parameters, arguments, and testsuites to run as part of a 'check-all'
rule. This sinks 'check-all' from a Clang-specific construct to
a generic construct of the project.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159482 91177308-0d34-0410-b5e6-96231b3b80d8
Makefiles, the CMake files in every other part of the LLVM tree, and
sanity.
This should also restore the output tree structure of all the unit
tests, sorry for breaking that, and thanks for letting me know.
The fundamental change is to put a CMakeLists.txt file in the unittest
directory, with a single test binary produced from it. This has several
advantages:
- No more weird directory stripping in the unittest macro, allowing it
to be used more readily in other projects.
- No more directory prefixes on all the source files.
- Allows correct and precise use of LLVM's per-directory dependency
system.
- Allows use of the checking logic for source files that have not been
added to the CMake build. This uncovered a file being skipped with
CMake in LLVM and one in Clang's unit tests.
- Makes Specifying conditional compilation or other custom logic for JIT
tests easier.
It did require adding the concept of an explicit 'optional' source file
to the CMake build so that the missing-file check can skip cases where
the file is *supposed* to be missing. =]
This is another chunk of refactoring the CMake build in order to make it
usable for other clients like CompilerRT / ASan / TSan.
Note that this is interdependent with a Clang CMake change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158909 91177308-0d34-0410-b5e6-96231b3b80d8
a helper function in CMake. This will allow us to share all of this
logic with Clang, and eventually CompilerRT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158896 91177308-0d34-0410-b5e6-96231b3b80d8
facilities.
This was only used in one place in LLVM, and was used pervasively (but
with different code!) in Clang. It has no advantages over the standard
CMake facilities and in some cases disadvantages.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158889 91177308-0d34-0410-b5e6-96231b3b80d8
This was previously only done for executables and shared libraries, but not
for modules. As modules are essentially shared libraries (that need to be
dlopened explicitly), threating them the same as shared libraries seems
reasonable. This fixes the LLVM_BUILD_32_BITS build of Polly.
Contributed by: Ondra Hosek <ondra.hosek@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158195 91177308-0d34-0410-b5e6-96231b3b80d8
output. Peter Collingbourne also reports that it is showing up in
$(llvm-config --cflags).
Revert this for now since I don't know enough cmake to fix it properly.
This reverts commit 18efed7adc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156392 91177308-0d34-0410-b5e6-96231b3b80d8
While making lld build under the tools directory I decided to refactor how this
works.
There is now a macro, add_llvm_external_project, which takes the name of the
expected subdirectory. This sets up two CMake options.
* LLVM_EXTERNAL_${NAME}_SOURCE_DIR
This is the path to the source. It defaults to
${CMAKE_CURRENT_SOURCE_DIR}/${name}.
* LLVM_EXTERNAL_${NAME}_BUILD
Enable and disable building the tool as part of LLVM.
I chose LLVM_EXTERNAL_${NAME} as a prefix so they all show up together in the
GUI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155654 91177308-0d34-0410-b5e6-96231b3b80d8
Clang builds. The detection logic for compilers that support the warning
isn't working. Rafael is going to investigate it, but didn't want people
to have to wade through build spam until then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151649 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for clients that want to maintain compatibility
across multiple releases of LLVM. Currently users like Klee and
Mesa all have to roll their own 'parse llvm-config --version
output and generate defines' solution.
Also reuse the new macros so that version information is less
redundant/likely to fall out of sync again in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150405 91177308-0d34-0410-b5e6-96231b3b80d8
dealing in the host triple, be honest about it and document the decision
to default the target triple to the host triple unless overridden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148822 91177308-0d34-0410-b5e6-96231b3b80d8
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
revision and git commit data extracted. This will be used in the Clang
CMake build to avoid trying to re-detect the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146324 91177308-0d34-0410-b5e6-96231b3b80d8
in CMake a bit more handy. Previously we would get such charming
versions as the following for revision NNNN and commit-ish XXXXX:
3.1svnsvn-rNNNN
3.1svngit-svn-rNNNN
3.1svngit-svn-XXXXX
The mechanism selecting betwene the latter two was particularly odd, and
didn't work with all of the ways git-svn repos are set up apparently. It
also misses an important point -- both the revision *and* the git commit
might be relevant when working on a local branch some distance from
mainline. The new logic does several things:
1) It strips the redundant initial 'svn'.
2) It always looks for a git-svn revision number base, and when found
includes it in the version.
3) If the git commit-ish for the current HEAD is not exactly that
revision number, it is also included.
The resulting strings should roughly be:
3.1svn-rNNNN
3.1git-svn-rNNNN
3.1git-svn-rNNNN-XXXXX
Suggestions on formatting etc always welcome. =] I've only looked at the
LLVM version string here, not Clang's (yet).
Note that the commit-ish reported is *not* terribly accurate. It updates
when 'cmake' is run, not when the binary is built. Still, it may be
better than nothing, especially if people have fairly long-lived git
repos and branches. This is not a new limitation, just didn't want
anyone to be surprised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146323 91177308-0d34-0410-b5e6-96231b3b80d8
- I verified locally that the current dependency lists are identical.
- This makes add_llvm_library_dependencies() a no-op. I'll remove it once this
change passes the bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145355 91177308-0d34-0410-b5e6-96231b3b80d8
Now that it needs to be exported in a public header (Valgrind.h)
it should be prefixed to avoid collision with other projects.
Add it to llvm-config.h as well.
This'll require regenerating the configure script after this
commit, but I don't have the required autoconf version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145214 91177308-0d34-0410-b5e6-96231b3b80d8
CMAKE_CONFIGURATION_TYPES is only set on Visual Studio generators. For NMake CMAKE_BUILD_TYPE is used instead.
Patch by EJose Fonseca!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143898 91177308-0d34-0410-b5e6-96231b3b80d8
one aspect of them by having them use the (annoying, if not broken)
proper library dependency model for adding the LLVMTableGen library as
a dependency. This could manifest as a link order issue in the presence
of separate LLVM / Clang source builds with CMake and a linker that
really cares about such things.
Also, add the Support dependency to llvm-tblgen itself so that it
doesn't rely on TableGen's transitive Support dependency. A parallel
change for clang-tblgen will be forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143531 91177308-0d34-0410-b5e6-96231b3b80d8
(void)static_func; it is used as idiom in llvm source tree to suppress "Unused static function" warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137800 91177308-0d34-0410-b5e6-96231b3b80d8
sub-library for the targets depended on the core target CodeGen library.
This completely undermined the careful work to separate the those
libraries, especially the MC-layer ones. This surfaced as circular
dependencies when the libraries were built as shared libraries where
CMake doesn't allow cycles.
This should fix PR10537. I'll watch the bots to see if there is fallout
on other platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136565 91177308-0d34-0410-b5e6-96231b3b80d8
globally scoped constructs. Also, round-trip these dependencies through
the LLVMConfig.cmake.in file thata is used by CMake-based clients of
"installed" (or built) LLVM trees.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136543 91177308-0d34-0410-b5e6-96231b3b80d8
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136433 91177308-0d34-0410-b5e6-96231b3b80d8
The first problem to fix is to stop creating synthetic *Table_gen
targets next to all of the LLVM libraries. These had no real effect as
CMake specifies that add_custom_command(OUTPUT ...) directives (what the
'tablegen(...)' stuff expands to) are implicitly added as dependencies
to all the rules in that CMakeLists.txt.
These synthetic rules started to cause problems as we started more and
more heavily using tablegen files from *subdirectories* of the one where
they were generated. Within those directories, the set of tablegen
outputs was still available and so these synthetic rules added them as
dependencies of those subdirectories. However, they were no longer
properly associated with the custom command to generate them. Most of
the time this "just worked" because something would get to the parent
directory first, and run tablegen there. Once run, the files existed and
the build proceeded happily. However, as more and more subdirectories
have started using this, the probability of this failing to happen has
increased. Recently with the MC refactorings, it became quite common for
me when touching a large enough number of targets.
To add insult to injury, several of the backends *tried* to fix this by
adding explicit dependencies back to the parent directory's tablegen
rules, but those dependencies didn't work as expected -- they weren't
forming a linear chain, they were adding another thread in the race.
This patch removes these synthetic rules completely, and adds a much
simpler function to declare explicitly that a collection of tablegen'ed
files are referenced by other libraries. From that, we can add explicit
dependencies from the smaller libraries (such as every architectures
Desc library) on this and correctly form a linear sequence. All of the
backends are updated to use it, sometimes replacing the existing attempt
at adding a dependency, sometimes adding a previously missing dependency
edge.
Please let me know if this causes any problems, but it fixes a rather
persistent and problematic source of build flakiness on our end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136023 91177308-0d34-0410-b5e6-96231b3b80d8
refactorings. Several places that shouldn't have dependend on Target no
longer do. Also almost all of the CodeGen dependencies have gone away
for the MCDisassembler. Others add reasonable dependencies within the
target-specific layers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135977 91177308-0d34-0410-b5e6-96231b3b80d8
The header file was already properly located. The previous need for it
in Support had to do with the version string printing which was fixed in
r135757.
Also update build dependencies where libraries that needed the
functionality of the Target library (in the form of the TargetRegistry)
were picking it up via Support. This is pretty pervasive, essentially
every TargetInfo library (ARMInfo, etc) uses TargetRegistry, making it
depend on Target. All of these were previously just sneaking by.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135760 91177308-0d34-0410-b5e6-96231b3b80d8
Evan's recent refactorings (I believe). Specifically, MCDisassembler no
longer depends on Target, and ARMDisassembler no longer depends on
CodeGen. The added dependencies from ARMAsmParser to ARMDesc looks
correct based on header file inclusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135759 91177308-0d34-0410-b5e6-96231b3b80d8
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135468 91177308-0d34-0410-b5e6-96231b3b80d8
backend. Moved some MCAsmInfo files down into the MCTargetDesc
sublibraries, removed some (i suspect long) dead files from other parts
of the CMake build, etc. Also copied the include directory hack from the
Makefile.
Finally, updated the lib deps. I spot checked this, and think its
correct, but review appreciated there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135234 91177308-0d34-0410-b5e6-96231b3b80d8
It's now replaced with a simple ifdef _MSC_VER in the one
place it's needed (clang's FileManager.h header).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133711 91177308-0d34-0410-b5e6-96231b3b80d8
Take #2. Don't piggyback on the existing config.build_mode. Instead,
define a new lit feature for each build feature we need (currently
just "asserts"). Teach both autoconf'd and cmake'd Makefiles to define
this feature within test/lit.site.cfg. This doesn't require any lit
harness changes and should be more robust across build systems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133664 91177308-0d34-0410-b5e6-96231b3b80d8
under cmake).
Add libprofile_rt.a so that we can tell clang to link against it in --coverage
mode. Also turn it on by default in cmake builds.
Oscar, this touches a change you made for EXCLUDE_FROM_ALL support -- I think
I've done the right thing, but please let me know (or fix and commit) if not!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130470 91177308-0d34-0410-b5e6-96231b3b80d8
component names such as "engine" do not expand to "jit" and hence to
the native target libraries for external users.
Thanks to arrowdodger for reporting and diagnosing the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129444 91177308-0d34-0410-b5e6-96231b3b80d8
