Instead operands are treated as negative immediates
where the sign bit is implicit in the instruction
encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181151 91177308-0d34-0410-b5e6-96231b3b80d8
Now even the small structures could be passed within byval (small enough
to be stored in GPRs).
In regression tests next function prototypes are checked:
PR15293:
%artz = type { i32 }
define void @foo(%artz* byval %s)
define void @foo2(%artz* byval %s, i32 %p, %artz* byval %s2)
foo: "s" stored in R0
foo2: "s" stored in R0, "s2" stored in R2.
Next AAPCS rules are checked:
5.5 Parameters Passing, C.4 and C.5,
"ParamSize" is parameter size in 32bit words:
-- NSAA != 0, NCRN < R4 and NCRN+ParamSize > R4.
Parameter should be sent to the stack; NCRN := R4.
-- NSAA != 0, and NCRN < R4, NCRN+ParamSize < R4.
Parameter stored in GPRs; NCRN += ParamSize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181148 91177308-0d34-0410-b5e6-96231b3b80d8
X86ISelLowering has support to treat:
(icmp ne (and (xor %flags, -1), (shl 1, flag)), 0)
as if it were actually:
(icmp eq (and %flags, (shl 1, flag)), 0)
However, r179386 has code at the InstCombine level to handle this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181145 91177308-0d34-0410-b5e6-96231b3b80d8
This removes dire warnings about AArch64 being unsupported and enables
the tests when appropriate on this platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181135 91177308-0d34-0410-b5e6-96231b3b80d8
R_AARCH64_PCREL32 is present in even trivial .eh_frame sections and so
is required to compile any function without the "nounwind" attribute.
This change implements very basic infrastructure in the RuntimeDyldELF
file and allows (for example) the test-shift.ll MCJIT test to pass
on AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181131 91177308-0d34-0410-b5e6-96231b3b80d8
This let us to remove some custom code that matched constant offsets
from globals at instruction selection time as a special addressing mode.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181126 91177308-0d34-0410-b5e6-96231b3b80d8
The code now makes use of ComputeMaskedBits,
SelectionDAG::isBaseWithConstantOffset and TargetLowering::isGAPlusOffset
where appropriate reducing the amount of logic needed in XCoreISelLowering.
No intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181125 91177308-0d34-0410-b5e6-96231b3b80d8
Thread local storage is not supported by the XMOS linker so we handle
thread local variables by lowering the variable to an array of n elements
(where n is the number of hardware threads per core, currently 8
for all XMOS devices) indexed by the the current thread ID.
Previously this lowering was spread across the XCoreISelLowering and the
XCoreAsmPrinter classes. Moving this to a separate pass should be much
cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181124 91177308-0d34-0410-b5e6-96231b3b80d8
Supporting TLS in the large memory model is rather difficult at the
moment, so make sure no-one gets into difficulties by mistake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181121 91177308-0d34-0410-b5e6-96231b3b80d8
The MOVZ/MOVK instruction sequence may not be the most efficient (a
literal-pool load could be better) but adding that would require
reinstating the ConstantIslands pass.
For now the sequence is correct, and that's enough. Beware, as of
commit GNU ld does not appear to support the relocations needed for
this. Its primary purpose (for now) will be to support JITed code,
since in that case there is no guarantee of where your code will end
up in memory relative to external symbols it references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181117 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to get get rid of a hack in XCoreTargetObjectFile where the
the DataRel* sections were overridden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181116 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC assemblers are supposed to support a stand-alone '$' symbol
as an alternative of '.' to refer to the current PC. This does not
work in the LLVM assembler parser yet.
To avoid bootstrap failures when using the LLVM assembler as system
assembler, this patch modifies the assembler source code generated
by LLVM to avoid using '$' (and simply use '.' instead).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181054 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a couple of Book II instructions (isync, icbi) to the
PowerPC assembler parser. These are needed when bootstrapping clang
with the integrated assembler forced on, because they are used in
inline asm statements in the code base.
The test case adds the full list of Book II storage control instructions,
including associated extended mnemonics. Again, those that are not yet
supported as marked as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181052 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds infrastructure to support extended mnemonics in the
PowerPC assembler parser. It adds support specifically for those
extended mnemonics that LLVM will itself generate.
The test case lists *all* extended mnemonics according to the
PowerPC ISA v2.06 Book I, but marks those not yet supported
as FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181051 91177308-0d34-0410-b5e6-96231b3b80d8
This adds assembler parser support to the PowerPC back end.
The parser will run for any powerpc-*-* and powerpc64-*-* triples,
but was tested only on 64-bit Linux. The supported syntax is
intended to be compatible with the GNU assembler.
The parser does not yet support all PowerPC instructions, but
it does support anything that is generated by LLVM itself.
There is no support for testing restricted instruction sets yet,
i.e. the parser will always accept any instructions it knows,
no matter what feature flags are given.
Instruction operands will be checked for validity and errors
generated. (Error handling in general could still be improved.)
The patch adds a number of test cases to verify instruction
and operand encodings. The tests currently cover all instructions
from the following PowerPC ISA v2.06 Book I facilities:
Branch, Fixed-point, Floating-Point, and Vector.
Note that a number of these instructions are not yet supported
by the back end; they are marked with FIXME.
A number of follow-on check-ins will add extra features. When
they are all included, LLVM passes all tests (including bootstrap)
when using clang -cc1as as the system assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181050 91177308-0d34-0410-b5e6-96231b3b80d8
its fields.
This removes false dependencies between DSP instructions which access different
fields of the the control register. Implicit register operands are added to
instructions RDDSP and WRDSP after instruction selection, depending on the
value of the mask operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181041 91177308-0d34-0410-b5e6-96231b3b80d8
Build attribute sections can now be read if they exist via ELFObjectFile, and
the llvm-readobj tool has been extended with an option to dump this information
if requested. Regression tests are also included which exercise these features.
Also update the docs with a fixed ARM ABI link and a new link to the Addenda
which provides the build attributes specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181009 91177308-0d34-0410-b5e6-96231b3b80d8
the "identifier" parsed by the frontend callback by skipping forward
until we've consumed a token that ends at the point dictated by the
callback.
In addition, inform the callback when it's parsing an unevaluated
operand (e.g. mov eax, LENGTH A::x) as opposed to an evaluated one
(e.g. mov eax, [A::x]).
This commit depends on a clang commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180978 91177308-0d34-0410-b5e6-96231b3b80d8
register.
- Define pseudo instructions which store or load ccond field of the DSP
control register.
- Emit the pseudos in MipsSEInstrInfo::storeRegToStack and loadRegFromStack.
- Expand the pseudos before callee-scan save.
- Emit instructions RDDSP or WRDSP to copy between ccond field and GPRs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180969 91177308-0d34-0410-b5e6-96231b3b80d8
* lib/Target/Hexagon/HexagonInstrInfo.td: Add patterns to combine a
sequence of a pair of i32->i64 extensions followed by a "bitwise or"
into COMBINE_rr.
* lib/Target/Hexagon/HexagonPeephole.cpp: Copy propagate Rx in the
instruction Rp = COMBINE_Ir_V4(0, Rx) to the uses of Rp:subreg_loreg.
* test/CodeGen/Hexagon/union-1.ll: New test.
* test/CodeGen/Hexagon/combine_ir.ll: Fix test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180946 91177308-0d34-0410-b5e6-96231b3b80d8
* lib/Target/Hexagon/HexagonInstrInfo.cpp (GetDotNewPredOp):
Given a jump opcode return the right pred.new jump opcode with
a taken vs not-taken hint based on branch probabilities provided
by the target independent module.
* lib/Target/Hexagon/HexagonVLIWPacketizer.cpp: Use the above function.
* lib/Target/Hexagon/HexagonNewValueJump.cpp(getNewvalueJumpOpcode):
Enhance existing function use branch probabilities like
HexagonInstrInfo::GetDotNewPredOp but for New Value (GPR) Jumps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180923 91177308-0d34-0410-b5e6-96231b3b80d8
All but two patterns have been converted to the new syntax. The
remaining two patterns will require COPY_TO_REGCLASS instructions, which
the VLIW DAG Scheduler cannot handle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180922 91177308-0d34-0410-b5e6-96231b3b80d8
Fortunately this pattern never matched, otherwise
we would have generated incorrect code.
Signed-off-by: Christian K??nig <christian.koenig@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180921 91177308-0d34-0410-b5e6-96231b3b80d8
