This reverts revision 232190 due to buildbot failure reported on clang-hexagon-elf
for test arm64_vtst.c. To be investigated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232196 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds initial support for vector instructions to the reassociation
pass. It enables most parts of the pass to work with vectors but to keep the
size of the patch small, optimization of Xor trees, canonicalization of
negative constants and converting shifts to muls, etc., have been left out.
This will be handled in later patches.
The patch is based on an initial patch by Chad Rosier.
Differential Revision: http://reviews.llvm.org/D7566
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232190 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232184 91177308-0d34-0410-b5e6-96231b3b80d8
Constant folding for shift IR instructions ignores all bits above 32 of
second argument (shift amount).
Because of that, some undef results are not recognized and APInt can
raise an assert failure if second argument has more than 64 bits.
Patch by Paweł Bylica!
Differential Revision: http://reviews.llvm.org/D7701
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232176 91177308-0d34-0410-b5e6-96231b3b80d8
It's firstly committed at r231630, and reverted at r231635.
Function pass InstructionSimplifier is inserted as barrier to
make sure loop unroll pass won't affect on LICM pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232011 91177308-0d34-0410-b5e6-96231b3b80d8
Given that large parts of inst combine is restricted to instructions which have one use, getting rid of a use on the condition can help the effectiveness of the optimizer. Also, it allows the condition to potentially be deleted by instcombine rather than waiting for another pass.
I noticed this completely by accident in another test case. It's not anything that actually came from a real workload.
p.s. We should probably do the same thing for switch instructions.
Differential Revision: http://reviews.llvm.org/D8220
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231881 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds limited support in ValueTracking for inferring known bits of a value from conditional expressions which must be true to reach the instruction we're trying to optimize. At this time, the feature is off by default. Once landed, I'm hoping for feedback from others on both profitability and compile time impact.
Forms of conditional value propagation have been tried in LLVM before and have failed due to compile time problems. In an attempt to side step that, this patch only considers conditions where the edge leaving the branch dominates the context instruction. It does not attempt full dataflow. Even with that restriction, it handles many interesting cases:
* Early exits from functions
* Early exits from loops (for context instructions in the loop and after the check)
* Conditions which control entry into loops, including multi-version loops (such as those produced during vectorization, IRCE, loop unswitch, etc..)
Possible applications include optimizing using information provided by constructs such as: preconditions, assumptions, null checks, & range checks.
This patch implements two approaches to the problem that need further benchmarking. Approach 1 is to directly walk the dominator tree looking for interesting conditions. Approach 2 is to inspect other uses of the value being queried for interesting comparisons. From initial benchmarking, it appears that Approach 2 is faster than Approach 1, but this needs to be further validated.
Differential Revision: http://reviews.llvm.org/D7708
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231879 91177308-0d34-0410-b5e6-96231b3b80d8
ReplaceInstUsesWith needs to return nullptr when the input has no users,
because in that case it does not mutate the program. Otherwise, we can
get stuck in an infinite loop of repeatedly attempting to constant fold
and instruction with no users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231755 91177308-0d34-0410-b5e6-96231b3b80d8
For inner one of nested loops, it is more likely to be a hot loop,
and the runtime check can be promoted out from patch 0001, so the
overhead is less, we can try a doubled threshold to unroll more loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231632 91177308-0d34-0410-b5e6-96231b3b80d8
Runtime unrolling is an expensive optimization which can bring benefit
only if the loop is hot and iteration number is relatively large enough.
For some loops, we know they are not worth to be runtime unrolled.
The scalar loop from vectorization is one of the cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231631 91177308-0d34-0410-b5e6-96231b3b80d8
Runtime unrollng will introduce a runtime check in loop prologue.
If the unrolled loop is a inner loop, then the proglogue will be inside
the outer loop. LICM pass can help to promote the runtime check out if
the checked value is loop invariant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231630 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
See the two test cases.
; Can fold fcmp with undef on one side by choosing NaN for the undef
; Can fold fcmp with undef on both side
; fcmp u_pred undef, undef -> true
; fcmp o_pred undef, undef -> false
; because whatever you choose for the first undef
; you can choose NaN for the other undef
Reviewers: hfinkel, chandlerc, majnemer
Reviewed By: majnemer
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D7617
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231626 91177308-0d34-0410-b5e6-96231b3b80d8
This pass interchanges loops to provide a more cache-friendly memory access.
For e.g. given a loop like -
for(int i=0;i<N;i++)
for(int j=0;j<N;j++)
A[j][i] = A[j][i]+B[j][i];
is interchanged to -
for(int j=0;j<N;j++)
for(int i=0;i<N;i++)
A[j][i] = A[j][i]+B[j][i];
This pass is currently disabled by default.
To give a brief introduction it consists of 3 stages-
LoopInterchangeLegality : Checks the legality of loop interchange based on Dependency matrix.
LoopInterchangeProfitability: A very basic heuristic has been added to check for profitibility. This will evolve over time.
LoopInterchangeTransform : Which does the actual transform.
LNT Performance tests shows improvement in Polybench/linear-algebra/kernels/mvt and Polybench/linear-algebra/kernels/gemver becnmarks.
TODO:
1) Add support for reductions and lcssa phi.
2) Improve profitability model.
3) Improve loop selection algorithm to select best loop for interchange. Currently the innermost loop is selected for interchange.
4) Improve compile time regression found in llvm lnt due to this pass.
5) Fix issues in Dependency Analysis module.
A special thanks to Hal for reviewing this code.
Review: http://reviews.llvm.org/D7499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231458 91177308-0d34-0410-b5e6-96231b3b80d8
At this point, we should have decent coverage of the involved code. I've got a few more test cases to cleanup and submit, but what's here is already reasonable.
I've got a collection of liveness tests which will be posted for review along with a decent liveness algorithm in the next few days. Once those are in, the code in this file should be well tested and I can start renaming things without risk of serious breakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231414 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231270 91177308-0d34-0410-b5e6-96231b3b80d8
RewriteStatepointsForGC pass emits an alloca for each GC pointer which will be relocated. It then inserts stores after def and all relocations, and inserts loads before each use as well. In the end, mem2reg is used to update IR with relocations in SSA form.
However, there is a problem with inserting stores for values defined by invoke instructions. The code didn't expect a def was a terminator instruction, and inserting instructions after these terminators resulted in malformed IR.
This patch fixes this problem by handling invoke instructions as a special case. If the def is an invoke instruction, the store will be inserted at the beginning of the normal destination block. Since return value from invoke instruction does not dominate the unwind destination block, no action is needed there.
Patch by: Chen Li
Differential Revision: http://reviews.llvm.org/D7923
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231183 91177308-0d34-0410-b5e6-96231b3b80d8
Selection conditions may be vectors or scalars. Make sure InstCombine
doesn't indiscriminately assume that a select which is value dependent
on another select have identical select condition types.
This fixes PR22773.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231156 91177308-0d34-0410-b5e6-96231b3b80d8
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231082 91177308-0d34-0410-b5e6-96231b3b80d8
By loading from indexed offsets into a byte array and applying a mask, a
program can test bits from the bit set with a relatively short instruction
sequence. For example, suppose we have 15 bit sets to lay out:
A (16 bits), B (15 bits), C (14 bits), D (13 bits), E (12 bits),
F (11 bits), G (10 bits), H (9 bits), I (7 bits), J (6 bits), K (5 bits),
L (4 bits), M (3 bits), N (2 bits), O (1 bit)
These bits can be laid out in a 16-byte array like this:
Byte Offset
0123456789ABCDEF
Bit
7 HHHHHHHHHIIIIIII
6 GGGGGGGGGGJJJJJJ
5 FFFFFFFFFFFKKKKK
4 EEEEEEEEEEEELLLL
3 DDDDDDDDDDDDDMMM
2 CCCCCCCCCCCCCCNN
1 BBBBBBBBBBBBBBBO
0 AAAAAAAAAAAAAAAA
For example, to test bit X of A, we evaluate ((bits[X] & 1) != 0), or to
test bit X of I, we evaluate ((bits[9 + X] & 0x80) != 0). This can be done
in 1-2 machine instructions on x86, or 4-6 instructions on ARM.
This uses the LPT multiprocessor scheduling algorithm to lay out the bits
efficiently.
Saves ~450KB of instructions in a recent build of Chromium.
Differential Revision: http://reviews.llvm.org/D7954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231043 91177308-0d34-0410-b5e6-96231b3b80d8
There's really no reason to have them have entries in the symbol table
anymore. Old versions of ld64 had some bugs in this area but those have
been fixed long ago.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231041 91177308-0d34-0410-b5e6-96231b3b80d8
This re-lands change r230921. r230921 was reverted because it broke a
clang test; a checkin fixing the clang test will be commited shortly.
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
This reverts commit 1ade0f0faa (SVN: 222213).
Revert "IndVarSimplify: Don't let LFTR compare against a poison value"
This reverts commit c0f2b8b528 (SVN: 217102).
Reviewers: majnemer, atrick, spatel
Differential Revision: http://reviews.llvm.org/D7979
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230921 91177308-0d34-0410-b5e6-96231b3b80d8
r228631 stopped using `DW_OP_piece` inside `DIExpression`s in the IR,
but it apparently missed updating these testcases. Caught by verifier
checks for `MDExpression` while working on moving the new hierarchy into
place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230882 91177308-0d34-0410-b5e6-96231b3b80d8
Leaving empty blocks around just opens up a can of bugs like PR22704. Deleting
them early also slightly simplifies code.
Thanks to Sanjay for the IR test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230856 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out the naming of inserted phis and selects is sensative to the order in which two sets are iterated. We need to nail this down to avoid non-deterministic output and possible test failures.
The modified test is the one I first noticed something odd in. The change is making it more strict to report the error. With the test change, but without the code change, the test fails roughly 1 in 5. With the code change, I've run ~30 runs without error.
Long term, the right fix here is to adjust the naming scheme. I'm checking in this hack to avoid any possible non-determinism in the tests over the weekend. HJust because I only noticed one case doesn't mean it's actually the only case. I hope to get to the right change Monday.
std->llvm data structure changes bugfix change #3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230835 91177308-0d34-0410-b5e6-96231b3b80d8
These tests cover the 'base object' identification and rewritting portion of RewriteStatepointsForGC. These aren't completely exhaustive, but they've proven to be reasonable effective over time at finding regressions.
In the process of porting these tests over, I found my first "cleanup per llvm code style standards" bug. We were relying on the order of iteration when testing the base pointers found for a derived pointer. When we switched from std::set to DenseSet, this stopped being a safe assumption. I'm suspecting I'm going to find more of those. In particular, I'm now really wondering about the main iteration loop for this algorithm. I need to go take a closer look at the assumptions there.
I'm not really happy with the fact these are testing what is essentially debug output (i.e. enabled via command line flags). Suggestions for how to structure this better are very welcome.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230818 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine has long had logic to convert aligned Altivec load/store intrinsics
into regular loads and stores. This mirrors that functionality for QPX vector
load/store intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230660 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine has logic to convert aligned Altivec load/store intrinsics into
regular loads and stores. Unfortunately, there seems to be no regression test
covering this behavior. Adding one...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230632 91177308-0d34-0410-b5e6-96231b3b80d8
IRCE can now split the iteration space for loops like:
for (i = n; i >= 0; i--)
a[i + k] = 42; // bounds check on access
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230618 91177308-0d34-0410-b5e6-96231b3b80d8
Use the IRBuilder helpers for gc.statepoint and gc.result, instead of
coding the construction by hand. Note that the gc.statepoint IRBuilder
handles only CallInst, not InvokeInst; retain that part of hand-coding.
Differential Revision: http://reviews.llvm.org/D7518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230591 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-on to r227491 which tightens the check for propagating FP
values. If a non-constant value happens to be a zero, we would hit the same
bug as before.
Bug noted and patch suggested by Eli Friedman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230564 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: SROA generates code that isn't quite as easy to optimize and contains unusual-sized shuffles, but that code is generally correct. As discussed in D7487 the right place to clean things up is InstCombine, which will pick up the type-punning pattern and transform it into a more obvious bitcast+extractelement, while leaving the other patterns SROA encounters as-is.
Test Plan: make check
Reviewers: jvoung, chandlerc
Subscribers: llvm-commits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230560 91177308-0d34-0410-b5e6-96231b3b80d8
This change aligns globals to the next highest power of 2 bytes, up to a
maximum of 128. This makes it more likely that we will be able to compress
bit sets with a greater alignment. In many more cases, we can now take
advantage of a new optimization also introduced in this patch that removes
bit set checks if the bit set is all ones.
The 128 byte maximum was found to provide the best tradeoff between instruction
overhead and data overhead in a recent build of Chromium. It allows us to
remove ~2.4MB of instructions at the cost of ~250KB of data.
Differential Revision: http://reviews.llvm.org/D7873
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230540 91177308-0d34-0410-b5e6-96231b3b80d8
(The change was landed in r230280 and caused the regression PR22674.
This version contains a fix and a test-case for PR22674).
When emitting the increment operation, SCEVExpander marks the
operation as nuw or nsw based on the flags on the preincrement SCEV.
This is incorrect because, for instance, it is possible that {-6,+,1}
is <nuw> while {-6,+,1}+1 = {-5,+,1} is not.
This change teaches SCEV to mark the increment as nuw/nsw only if it
can explicitly prove that the increment operation won't overflow.
Apart from the attached test case, another (more realistic)
manifestation of the bug can be seen in
Transforms/IndVarSimplify/pr20680.ll.
Differential Revision: http://reviews.llvm.org/D7778
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230533 91177308-0d34-0410-b5e6-96231b3b80d8
With a diabolically crafted test case, we could recurse
through this code and return true instead of false.
The larger engineering crime is the use of magic numbers.
Added FIXME comments for those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230515 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change fixes the FIXME that you recently added when you committed
(a modified version of) my patch. When `InstCombine` combines a load and
store of an pointer to those of an equivalently-sized integer, it currently
drops any `!nonnull` metadata that might be present. This change replaces
`!nonnull` metadata with `!range !{ 1, -1 }` metadata instead.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230462 91177308-0d34-0410-b5e6-96231b3b80d8
The builder is based on a layout algorithm that tries to keep members of
small bit sets together. The new layout compresses Chromium's bit sets to
around 15% of their original size.
Differential Revision: http://reviews.llvm.org/D7796
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230394 91177308-0d34-0410-b5e6-96231b3b80d8
This case is interesting because ScalarEvolutionExpander lowers min(a,
b) as ~max(~a,~b). I think the profitability heuristics can be made
more clever/aggressive, but this is a start.
Differential Revision: http://reviews.llvm.org/D7821
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230285 91177308-0d34-0410-b5e6-96231b3b80d8
When emitting the increment operation, SCEVExpander marks the
operation as nuw or nsw based on the flags on the preincrement SCEV.
This is incorrect because, for instance, it is possible that {-6,+,1}
is <nuw> while {-6,+,1}+1 = {-5,+,1} is not.
This change teaches SCEV to mark the increment as nuw/nsw only if it
can explicitly prove that the increment operation won't overflow.
Apart from the attached test case, another (more realistic) manifestation
of the bug can be seen in Transforms/IndVarSimplify/pr20680.ll.
NOTE: this change was landed with an incorrect commit message in
rL230275 and was reverted for that reason in rL230279. This commit
message is the correct one.
Differential Revision: http://reviews.llvm.org/D7778
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230280 91177308-0d34-0410-b5e6-96231b3b80d8
230275 got committed with an incorrect commit message due to a mixup
on my side. Will re-land in a few moments with the correct commit
message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230279 91177308-0d34-0410-b5e6-96231b3b80d8
The bug was a result of getPreStartForExtend interpreting nsw/nuw
flags on an add recurrence more strongly than is legal. {S,+,X}<nsw>
implies S+X is nsw only if the backedge of the loop is taken at least
once.
Differential Revision: http://reviews.llvm.org/D7808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230275 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the isProfitableToHoist API. For AArch64, we want to prevent a
fmul from being hoisted in cases where it is more profitable to form a
fmsub/fmadd.
Phabricator Review: http://reviews.llvm.org/D7299
Patch by Lawrence Hu <lawrence@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230241 91177308-0d34-0410-b5e6-96231b3b80d8
calculations. Semantically non-functional change.
This gets rid of some of the SCEV -> Value -> SCEV round tripping and
the Construct(SMin|SMax)Of and MaybeSimplify helper routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230150 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, this pass ran over every function in the Module if added to the pass order. With this change, it runs only over those with a GC attribute where the GC explicitly opts in. A GC can also choose which of entry safepoint polls, backedge safepoint polls, and call safepoints it wants. I hope to get these exposed as checks on the GCStrategy at some point, but for now, the checks are manual string comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230097 91177308-0d34-0410-b5e6-96231b3b80d8
Yet another chapter in the endless story. While this looks like we leave
the loop in a non-canonical state this replicates the logic in
LoopSimplify so it doesn't diverge from the canonical form in any way.
PR21968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230058 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new mechanism that allows IR modules to co-operatively
build pointer sets corresponding to addresses within a given set of
globals. One particular use case for this is to allow a C++ program to
efficiently verify (at each call site) that a vtable pointer is in the set
of valid vtable pointers for the class or its derived classes. One way of
doing this is for a toolchain component to build, for each class, a bit set
that maps to the memory region allocated for the vtables, such that each 1
bit in the bit set maps to a valid vtable for that class, and lay out the
vtables next to each other, to minimize the total size of the bit sets.
The patch introduces a metadata format for representing pointer sets, an
'@llvm.bitset.test' intrinsic and an LTO lowering pass that lays out the globals
and builds the bitsets, and documents the new feature.
Differential Revision: http://reviews.llvm.org/D7288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230054 91177308-0d34-0410-b5e6-96231b3b80d8
Before calling Function::getGC to test for enablement, we need to make sure there's actually a GC at all via Function::hasGC. Otherwise, we'd crash on functions without a GC. Thankfully, this only mattered if you manually scheduled the pass, but still, oops. :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230040 91177308-0d34-0410-b5e6-96231b3b80d8
This change addresses a deficiency pointed out in PR22629. To copy from the bug
report:
[from the bug report]
Consider this code:
int f(int x) {
int a[] = {12};
return a[x];
}
GCC knows to optimize this to
movl $12, %eax
ret
The code generated by recent Clang at -O3 is:
movslq %edi, %rax
movl .L_ZZ1fiE1a(,%rax,4), %eax
retq
.L_ZZ1fiE1a:
.long 12 # 0xc
[end from the bug report]
This definitely seems worth fixing. I've also seen this kind of code before (as
the base case of generic vector wrapper templates with one element).
The general idea is to look at the GEP feeding a load or a store, which has
some variable as its first non-zero index, and determine if that index must be
zero (or else an out-of-bounds access would occur). We can do this for allocas
and globals with constant initializers where we know the maximum size of the
underlying object. When we find such a GEP, we create a new one for the memory
access with that first variable index replaced with a constant zero.
Even if we can't eliminate the memory access (and sometimes we can't), it is
still useful because it removes unnecessary indexing calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229959 91177308-0d34-0410-b5e6-96231b3b80d8
When back merging the changes in 229945 I noticed that I forgot to mark the test cases with the appropriate GC. We want the rewriting to be off by default (even when manually added to the pass order), not on-by default. To keep the current test working, mark them as using the statepoint-example GC and whitelist that GC.
Longer term, we need a better selection mechanism here for both actual usage and testing. As I migrate more tests to the in tree version of this pass, I will probably need to update the enable/disable logic as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229954 91177308-0d34-0410-b5e6-96231b3b80d8
This patch consists of a single pass whose only purpose is to visit previous inserted gc.statepoints which do not have gc.relocates inserted yet, and insert them. This can be used either immediately after IR generation to perform 'early safepoint insertion' or late in the pass order to perform 'late insertion'.
This patch is setting the stage for work to continue in tree. In particular, there are known naming and style violations in the current patch. I'll try to get those resolved over the next week or so. As I touch each area to make style changes, I need to make sure we have adequate testing in place. As part of the cleanup, I will be cleaning up a collection of test cases we have out of tree and submitting them upstream. The tests included in this change are very basic and mostly to provide examples of usage.
The pass has several main subproblems it needs to address:
- First, it has identify any live pointers. In the current code, the use of address spaces to distinguish pointers to GC managed objects is hard coded, but this will become parametrizable in the near future. Note that the current change doesn't actually contain a useful liveness analysis. It was seperated into a followup change as the code wasn't ready to be shared. Instead, the current implementation just considers any dominating def of appropriate pointer type to be live.
- Second, it has to identify base pointers for each live pointer. This is a fairly straight forward data flow algorithm.
- Third, the information in the previous steps is used to actually introduce rewrites. Rather than trying to do this by hand, we simply re-purpose the code behind Mem2Reg to do this for us.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229945 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r223862, r224198, r224203, and r224754, which were
reverted in r228129 because they exposed Clang misalignment problems
when self-hosting.
The combine caused the crashes because we turned ISD::LOAD/STORE nodes
to ARMISD::VLD1/VST1_UPD nodes. When selecting addressing modes, we
were very lax for the former, and only emitted the alignment operand
(as in "[r1:128]") when it was larger than the standard alignment of
the memory type.
However, for ARMISD nodes, we just used the MMO alignment, no matter
what. In our case, we turned ISD nodes to ARMISD nodes, and this
caused the alignment operands to start being emitted.
And that's how we exposed alignment problems that were ignored before
(but I believe would have been caught with SCTRL.A==1?).
To fix this, we can just mirror the hack done for ISD nodes: only
take into account the MMO alignment when the access is overaligned.
Original commit message:
We used to only combine intrinsics, and turn them into VLD1_UPD/VST1_UPD
when the base pointer is incremented after the load/store.
We can do the same thing for generic load/stores.
Note that we can only combine the first load/store+adds pair in
a sequence (as might be generated for a v16f32 load for instance),
because other combines turn the base pointer addition chain (each
computing the address of the next load, from the address of the last
load) into independent additions (common base pointer + this load's
offset).
rdar://19717869, rdar://14062261.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229932 91177308-0d34-0410-b5e6-96231b3b80d8
First, don't combine bit masking into vector shuffles (even ones the
target can handle) once operation legalization has taken place. Custom
legalization of vector shuffles may exist for these patterns (making the
predicate return true) but that custom legalization may in some cases
produce the exact bit math this matches. We only really want to handle
this prior to operation legalization.
However, the x86 backend, in a fit of awesome, relied on this. What it
would do is mark VSELECTs as expand, which would turn them into
arithmetic, which this would then match back into vector shuffles, which
we would then lower properly. Amazing.
Instead, the second change is to teach the x86 backend to directly form
vector shuffles from VSELECT nodes with constant conditions, and to mark
all of the vector types we support lowering blends as shuffles as custom
VSELECT lowering. We still mark the forms which actually support
variable blends as *legal* so that the custom lowering is bypassed, and
the legal lowering can even be used by the vector shuffle legalization
(yes, i know, this is confusing. but that's how the patterns are
written).
This makes the VSELECT lowering much more sensible, and in fact should
fix a bunch of bugs with it. However, as you'll see in the test cases,
right now what it does is point out the *hilarious* deficiency of the
new vector shuffle lowering when it comes to blends. Fortunately, my
very next patch fixes that. I can't submit it yet, because that patch,
somewhat obviously, forms the exact and/or pattern that the DAG combine
is matching here! Without this patch, teaching the vector shuffle
lowering to produce the right code infloops in the DAG combiner. With
this patch alone, we produce terrible code but at least lower through
the right paths. With both patches, all the regressions here should be
fixed, and a bunch of the improvements (like using 2 shufps with no
memory loads instead of 2 andps with memory loads and an orps) will
stay. Win!
There is one other change worth noting here. We had hilariously wrong
vectorization cost estimates for vselect because we fell through to the
code path that assumed all "expand" vector operations are scalarized.
However, the "expand" lowering of VSELECT is vector bit math, most
definitely not scalarized. So now we go back to the correct if horribly
naive cost of "1" for "not scalarized". If anyone wants to add actual
modeling of shuffle costs, that would be cool, but this seems an
improvement on its own. Note the removal of 16 and 32 "costs" for doing
a blend. Even in SSE2 we can blend in fewer than 16 instructions. ;] Of
course, we don't right now because of OMG bad code, but I'm going to fix
that. Next patch. I promise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229835 91177308-0d34-0410-b5e6-96231b3b80d8
Don't spend the entire iteration space in the scalar loop prologue if
computing the trip count overflows. This change also gets rid of the
backedge check in the prologue loop and the extra check for
overflowing trip-count.
Differential Revision: http://reviews.llvm.org/D7715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229731 91177308-0d34-0410-b5e6-96231b3b80d8
See the comment in the code.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229627 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombiner::visitGetElementPtrInst was using getFirstNonPHI to compute the
insertion point, which caused the verifier to complain when a GEP was inserted
before a landingpad instruction. This commit fixes it to use getFirstInsertionPt
instead.
rdar://problem/19394964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229619 91177308-0d34-0410-b5e6-96231b3b80d8
When visiting the initial list of "root" instructions (those which must always
be alive), for those that are integer-valued (such as invokes returning an
integer), we mark their bits as (initially) all dead (we might, obviously, find
uses of those bits later, but all bits are assumed dead until proven
otherwise). Don't do so, however, if we're already seen a use of those bits by
another root instruction (such as a store).
Fixes a miscompile of the sanitizer unit tests on x86_64.
Also, add a debug line for visiting the root instructions, and remove a debug
line which tried to print instructions being removed (printing dead
instructions is dangerous, and can sometimes crash).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229618 91177308-0d34-0410-b5e6-96231b3b80d8
BDCE is a bit-tracking dead code elimination pass. It is based on ADCE (the
"aggressive DCE" pass), with the added capability to track dead bits of integer
valued instructions and remove those instructions when all of the bits are
dead.
Currently, it does not actually do this all-bits-dead removal, but rather
replaces the instruction's uses with a constant zero, and lets instcombine (and
the later run of ADCE) do the rest. Because we essentially get a run of ADCE
"for free" while tracking the dead bits, we also do what ADCE does and removes
actually-dead instructions as well (this includes instructions newly trivially
dead because all bits were dead, but not all such instructions can be removed).
The motivation for this is a case like:
int __attribute__((const)) foo(int i);
int bar(int x) {
x |= (4 & foo(5));
x |= (8 & foo(3));
x |= (16 & foo(2));
x |= (32 & foo(1));
x |= (64 & foo(0));
x |= (128& foo(4));
return x >> 4;
}
As it turns out, if you order the bit-field insertions so that all of the dead
ones come last, then instcombine will remove them. However, if you pick some
other order (such as the one above), the fact that some of the calls to foo()
are useless is not locally obvious, and we don't remove them (without this
pass).
I did a quick compile-time overhead check using sqlite from the test suite
(Release+Asserts). BDCE took ~0.4% of the compilation time (making it about
twice as expensive as ADCE).
I've not looked at why yet, but we eliminate instructions due to having
all-dead bits in:
External/SPEC/CFP2006/447.dealII/447.dealII
External/SPEC/CINT2006/400.perlbench/400.perlbench
External/SPEC/CINT2006/403.gcc/403.gcc
MultiSource/Applications/ClamAV/clamscan
MultiSource/Benchmarks/7zip/7zip-benchmark
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229462 91177308-0d34-0410-b5e6-96231b3b80d8
We won't find a root with index zero in any loop that we are able to reroll.
However, we may find one in a non-rerollable loop, so bail gracefully instead
of failing hard.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229406 91177308-0d34-0410-b5e6-96231b3b80d8
If a PHI has no users, don't crash; bail gracefully. This shouldn't
happen often, but we can make no guarantees that previous passes didn't leave
dead code around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229405 91177308-0d34-0410-b5e6-96231b3b80d8
We didn't properly handle the out-of-bounds case for
ConstantAggregateZero and UndefValue. This would manifest as a crash
when the constant folder was asked to fold a load of a constant global
whose struct type has no operands.
This fixes PR22595.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229352 91177308-0d34-0410-b5e6-96231b3b80d8
The "dereferenceable" attribute cannot be added via .addAttribute(),
since it also expects a size in bytes. AttrBuilder#addAttribute or
AttributeSet#addAttribute is wrapped by classes Function, InvokeInst,
and CallInst. Add corresponding wrappers to
AttrBuilder#addDereferenceableAttr.
Having done this, propagate the dereferenceable attribute via
gc.relocate, adding a test to exercise it. Note that -datalayout is
required during execution over and above -instcombine, because
InstCombine only optionally requires DataLayoutPass.
Differential Revision: http://reviews.llvm.org/D7510
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229265 91177308-0d34-0410-b5e6-96231b3b80d8
If we know that the sign bit of a value being sign extended is zero, we can use a zero extension instead. This is motivated by the fact that zero extensions are generally cheaper on x86 (and most other architectures?). We already apply a similar transform in DAGCombine, this just extends that to the IR level.
This comes up when we eagerly canonicalize gep indices to the width of a machine register (i64 on x86_64). To do so, we insert sign extensions (sext) to promote smaller types.
Differential Revision: http://reviews.llvm.org/D7255
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229189 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a problem I accidentally introduced in an instruction combine
on select instructions added at r227197. That revision taught the instruction
combiner how to fold a cttz/ctlz followed by a icmp plus select into a single
cttz/ctlz with flag 'is_zero_undef' cleared.
However, the new rule added at r227197 would have produced wrong results in the
case where a cttz/ctlz with flag 'is_zero_undef' cleared was follwed by a
zero-extend or truncate. In that case, the folded instruction would have
been inserted in a wrong location thus leaving the CFG in an inconsistent
state.
This patch fixes the problem and add two reproducible test cases to
existing test 'InstCombine/select-cmp-cttz-ctlz.ll'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229124 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG now knows how to speculate calls to intrinsic cttz/ctlz that are
'cheap' for the target. Therefore, some of the logic in CodeGenPrepare
that was originally added at revision 224899 can now be removed.
This patch is basically a no functional change. It removes the duplicated
logic in CodeGenPrepare and converts all the existing target specific tests
for cttz/ctlz into SimplifyCFG tests.
Differential Revision: http://reviews.llvm.org/D7608
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229105 91177308-0d34-0410-b5e6-96231b3b80d8
The issues with the new unroll analyzer are more fundamental than code
cleanup, algorithm, or data structure changes. I've sent an email to the
original commit thread with details and a proposal for how to redesign
things. I'm disabling this for now so that we don't spend time
debugging issues with it in its current state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229064 91177308-0d34-0410-b5e6-96231b3b80d8
- First, there's a crash when we try to combine that pointers into `icmp`
directly by creating a `bitcast`, which is invalid if that two pointers are
from different address spaces.
- It's not always appropriate to cast one pointer to another if they are from
different address spaces as that is not no-op cast. Instead, we only combine
`icmp` from `ptrtoint` if that two pointers are of the same address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229063 91177308-0d34-0410-b5e6-96231b3b80d8
propagating of metadata.
We were propagating !nonnull metadata even when the newly formed load is
no longer of a pointer type. This is clearly broken and results in LLVM
failing the verifier and aborting. This patch just restricts the
propagation of !nonnull metadata to when we actually have a pointer
type.
This bug report and the initial version of this patch was provided by
Charles Davis! Many thanks for finding this!
We still need to add logic to round-trip the metadata correctly if we
combine from pointer types to integer types and then back by using range
metadata for the integer type loads. But this is the minimal and safe
version of the patch, which is important so we can backport it into 3.6.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229029 91177308-0d34-0410-b5e6-96231b3b80d8
