more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207302 91177308-0d34-0410-b5e6-96231b3b80d8
right intrinsics.
A packed logical shift right with a shift count bigger than or equal to the
element size always produces a zero vector. In all other cases, it can be
safely replaced by a 'lshr' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207299 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207135 91177308-0d34-0410-b5e6-96231b3b80d8
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
This excludes avx512 as I don't have hardware to verify. It excludes _dq
variants because they are represented in the IR as <{2,4} x i64> when it's
actually a byte shift of the entire i{128,265}.
This also excludes _dq_bs as they aren't at all supported by the backend.
There are also no corresponding instructions in the ISA. I have no idea why
they exist...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207058 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Since the upper 64 bits of the destination register are undefined when
performing this operation, we can substitute it and let the optimizer
figure out that only a copy is needed.
Also added range merging, if an instruction copies a range that can be
merged with a previous copied range.
Added test cases for both optimizations.
Reviewers: grosbach, nadav
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3357
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207055 91177308-0d34-0410-b5e6-96231b3b80d8
Don't replace shifts greater than the type with the maximum shift.
This isn't hit anywhere in the tests, and somewhere else is replacing
these with undef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207000 91177308-0d34-0410-b5e6-96231b3b80d8
Pass::doInitialization is supposed to return False when it did not
change the program, not when a fatal error occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206975 91177308-0d34-0410-b5e6-96231b3b80d8
In the case where the constant comes from a cloned cast instruction, the
materialization code has to go before the cloned cast instruction.
This commit fixes the method that finds the materialization insertion point
by making it aware of this case.
This fixes <rdar://problem/15532441>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206913 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206844 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
With a constant mask a vpermil* is just a shufflevector. This patch implements
that simplification. This allows us to produce denser code. It should also
allow more folding down the line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206801 91177308-0d34-0410-b5e6-96231b3b80d8
The -tailcallelim pass should be checking if byval or inalloca args can
be captured before marking calls as tail calls. This was the real root
cause of PR7272.
With a better fix in place, revert the inliner change from r105255. The
test case it introduced still passes and has been moved to
test/Transforms/Inline/byval-tail-call.ll.
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D3403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206789 91177308-0d34-0410-b5e6-96231b3b80d8
header files and into the cpp files.
These files will require more touches as the header files actually use
DEBUG(). Eventually, I'll have to introduce a matched #define and #undef
of DEBUG_TYPE for the header files, but that comes as step N of many to
clean all of this up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206777 91177308-0d34-0410-b5e6-96231b3b80d8
This flag replaces inline instrumentation for checks and origin stores with
calls into MSan runtime library. This is a workaround for PR17409.
Disabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206585 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This prevents the discriminator generation pass from triggering if
the DWARF version being used in the module is prior to 4.
Reviewers: echristo, dblaikie
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206507 91177308-0d34-0410-b5e6-96231b3b80d8
