Summary:
For the moment, TargetMachine::getTargetTriple() still returns a StringRef.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: ted, llvm-commits, rengolin, jholewinski
Differential Revision: http://reviews.llvm.org/D10362
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239554 91177308-0d34-0410-b5e6-96231b3b80d8
This makes emitAbsoluteSymbolDiff always succeed and moves logic from the asm
printer to it.
The object one now also works on ELF. If two symbols are in the same fragment,
we will never move them apart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239552 91177308-0d34-0410-b5e6-96231b3b80d8
It hasn't been used since r130964.
This also removes MachineModuleInfo::isUsedFunction and
MachineModuleInfo::AnalyzeModule, both of which were only
there to support UsedFunctions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239501 91177308-0d34-0410-b5e6-96231b3b80d8
This always just set the User::OperandList which is now set
in that method instead of being returned.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239493 91177308-0d34-0410-b5e6-96231b3b80d8
PhiNode, SwitchInst, LandingPad and IndirectBr all had virtually identical
logic for growing the hung off uses.
Move it to User so that they can all call a single shared implementation.
Their destructors were all empty after this change and were deleted. They all
have virtual clone_impl methods which can be used as vtable anchors.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239492 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the subclasses which care about hung off uses let ~User clean it up,
there's no need for a separate method. Just inline it to ~User and delete it.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239491 91177308-0d34-0410-b5e6-96231b3b80d8
Currently all of the logic for deleting hung off uses, which PHI/switch/etc use,
is in their classes.
This adds a bit to Value which tracks whether that user had hung off uses,
then User can be responsible for clearing them instead of the sub classes.
Note, the bit used here was taken from NumOperands which was 30-bits.
Given the reduction to 29 bits, and the average User being just over 100 bytes,
a single User with 29-bits of num operands would need 50GB of RAM for itself
so its reasonable to assume that 29-bits is enough for now.
This is a step towards hiding all the hung off uses logic in the User.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239490 91177308-0d34-0410-b5e6-96231b3b80d8
PhiNode's need to allocate space for an array of Use[N] and then BasicBlock*[N].
They had their own allocHungOffUses to handle all of this. This moves the logic
in to User::allocHungOffUses and PhiNode passes in a bool to say to allocate
the BB* space too.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239489 91177308-0d34-0410-b5e6-96231b3b80d8
O2 compiles just before GlobalDCE, unless we are preparing for LTO.
This pass eliminates available externally globals (turning them into
declarations), regardless of whether they are dead/unreferenced, since
we are guaranteed to have a copy available elsewhere at link time.
This enables additional opportunities for GlobalDCE.
If we are preparing for LTO (e.g. a -flto -c compile), the pass is not
included as we want to preserve available externally functions for possible
link time inlining. The FE indicates whether we are doing an -flto compile
via the new PrepareForLTO flag on the PassManagerBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239480 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rafael
Reviewed By: rafael
Subscribers: rafael, ted, jfb, llvm-commits, rengolin, jholewinski
Differential Revision: http://reviews.llvm.org/D10311
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239467 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rafael
Reviewed By: rafael
Subscribers: rafael, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10307
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239465 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: echristo, rafael
Reviewed By: rafael
Subscribers: rafael, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239464 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 2e449ec5bcdf67b52b315b16c2128aaf25d5b73c.
This was svn r239440. Its currently failing an ARM test so reverting while I work out
what to do next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239441 91177308-0d34-0410-b5e6-96231b3b80d8
It wasn't possible to have a variable Symbol with offset or 'isCommon' so
this just enables better packing of the MCSymbol class.
Reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239440 91177308-0d34-0410-b5e6-96231b3b80d8
This gets all the handler info through to the asm printer and we can
look at the .xdata tables now. I've convinced one small catch-all test
case to work, but other than that, it would be a stretch to say this is
functional.
The state numbering algorithm avoids doing any scope reconstruction as
we do for C++ to simplify the implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239433 91177308-0d34-0410-b5e6-96231b3b80d8
Based on feedback to r239428 by David Blaikie, use const_cast to reduce
duplication of the const and non-const versions of getNameEntryPtr.
Also have that method return the pointer to the name directly instead
of users having to then get the name from the union.
Finally, add a FIXME that we should use a static_assert once available in
the new operator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239429 91177308-0d34-0410-b5e6-96231b3b80d8
This should hopefully fix the 32-bit bots which were allocating space for a pointer
but needed to be aligned to 64-bits.
Now we allocate enough space for a uint64_t and a pointer and cast to the appropriate storage
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239428 91177308-0d34-0410-b5e6-96231b3b80d8
that was resetting it.
Remove the uses of DisableTailCalls in subclasses of TargetLowering and use
the value of function attribute "disable-tail-calls" instead. Also,
unconditionally add pass TailCallElim to the pipeline and check the function
attribute at the start of runOnFunction to disable the pass on a per-function
basis.
This is part of the work to remove TargetMachine::resetTargetOptions, and since
DisableTailCalls was the last non-fast-math option that was being reset in that
function, we should be able to remove the function entirely after the work to
propagate IR-level fast-math flags to DAG nodes is completed.
Out-of-tree users should remove the uses of DisableTailCalls and make changes
to attach attribute "disable-tail-calls"="true" or "false" to the functions in
the IR.
rdar://problem/13752163
Differential Revision: http://reviews.llvm.org/D10099
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239427 91177308-0d34-0410-b5e6-96231b3b80d8
Similarly to User which allocates a number of Use's prior to the this pointer,
allocate space for the Name* for MCSymbol only when we need a name.
Given that an MCSymbol is 48-bytes on 64-bit systems, this saves a decent % of space.
Given the verify_uselistorder test case with debug info and llc, 50k symbols have names
out of 700k so this optimises for the common case of temporary unnamed symbols.
Reviewed by David Blaikie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239423 91177308-0d34-0410-b5e6-96231b3b80d8
make_error_code(object_error) is slow because object::object_category()
uses a ManagedStatic variable. But the real problem is that the function is
called too frequently. This patch uses std::error_code() instead of
object_error::success. In most cases, we return "success", so this patch
reduces number of function calls to that function.
http://reviews.llvm.org/D10333
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239409 91177308-0d34-0410-b5e6-96231b3b80d8
Specified the llvm namespace for the 2 calls to make_unique() which caused
compilation errors in Visual Studio 2013.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239405 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes most of the test suite on Windows with clang-cl.
I'm not sure why the test suite was passing with MSVC 2013. Maybe they
changed their behavior and we are emulating their old sign extension
behavior. I think this deserves more investigation, but I want to green
the bot first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239357 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This was a longstanding FIXME and is a necessary precursor to cases
where foldOperandImpl may have to create more than one instruction
(e.g. to constrain a register class). This is the split out NFC changes from
D6262.
Reviewers: pete, ributzka, uweigand, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, ted, llvm-commits
Differential Revision: http://reviews.llvm.org/D10174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239336 91177308-0d34-0410-b5e6-96231b3b80d8
on a per-function basis.
Previously some of the passes were conditionally added to ARM's pass pipeline
based on the target machine's subtarget. This patch makes changes to add those
passes unconditionally and execute them conditonally based on the predicate
functor passed to the pass constructors. This enables running different sets of
passes for different functions in the module.
rdar://problem/20542263
Differential Revision: http://reviews.llvm.org/D8717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239325 91177308-0d34-0410-b5e6-96231b3b80d8
The Fragment and Section, and a bool for HasFragment were all used to create
a PointerUnion. Just use a pointer union instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239324 91177308-0d34-0410-b5e6-96231b3b80d8
All of ELF, COFF and MachO now manipulate the flags in helpers so we don't need
anyone to read the flags directly, but instead via those helpers.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239317 91177308-0d34-0410-b5e6-96231b3b80d8
Also delete the now unused MCMachOSymbolFlags.h header as the only enum in there was moved to MCSymbolMachO.
Similarly to ELF and COFF, manipulating the flags is now done via helpers instead of spread
throughout the codebase.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239316 91177308-0d34-0410-b5e6-96231b3b80d8
All flags setting/getting is now done in the class with helper methods instead
of users having to get the bits in the correct order.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239314 91177308-0d34-0410-b5e6-96231b3b80d8
The flags field in MCSymbol only needs to be 16-bits on ELF and MachO.
This moves the 16-bit Type out of there so that it can be reduced in size in a future commit.
Reviewed by Rafael Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239313 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We need to add a runtime memcheck for pair of accesses (x,y) where at least one of x and y
are writes.
Assuming we have w writes and r reads, currently this number is estimated as being
w* (w+r-1). This estimation will count (write,write) pairs twice and will overestimate
the number of checks required.
This change adds a getNumberOfChecks method to RuntimePointerCheck, which
will count the number of runtime checks needed (similar in implementation to
needsAnyChecking) and uses it to produce the correct number of runtime checks.
Test Plan:
llvm test suite
spec2k
spec2k6
Performance results: no changes observed (not surprising since the formula for 1 writer is basically the same, which would covers most cases - at least with the current check limit).
Reviewers: anemet
Reviewed By: anemet
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D10217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239295 91177308-0d34-0410-b5e6-96231b3b80d8
Interleaved memory accesses are grouped and vectorized into vector load/store and shufflevector.
E.g. for (i = 0; i < N; i+=2) {
a = A[i]; // load of even element
b = A[i+1]; // load of odd element
... // operations on a, b, c, d
A[i] = c; // store of even element
A[i+1] = d; // store of odd element
}
The loads of even and odd elements are identified as an interleave load group, which will be transfered into vectorized IRs like:
%wide.vec = load <8 x i32>, <8 x i32>* %ptr
%vec.even = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
%vec.odd = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
The stores of even and odd elements are identified as an interleave store group, which will be transfered into vectorized IRs like:
%interleaved.vec = shufflevector <4 x i32> %vec.even, %vec.odd, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
store <8 x i32> %interleaved.vec, <8 x i32>* %ptr
This optimization is currently disabled by defaut. To try it by adding '-enable-interleaved-mem-accesses=true'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239291 91177308-0d34-0410-b5e6-96231b3b80d8
These were, originally, in a different form in lld.
They can be reused for other tools, e.g. llvm-readobj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239231 91177308-0d34-0410-b5e6-96231b3b80d8
The new naming is (to me) much easier to understand. Here is a summary
of the new state of the world:
- '*Threshold' is the threshold for full unrolling. It is measured
against the estimated unrolled cost as computed by getUserCost in TTI
(or CodeMetrics, etc). We will exceed this threshold when unrolling
loops where unrolling exposes a significant degree of simplification
of the logic within the loop.
- '*PercentDynamicCostSavedThreshold' is the percentage of the loop's
estimated dynamic execution cost which needs to be saved by unrolling
to apply a discount to the estimated unrolled cost.
- '*DynamicCostSavingsDiscount' is the discount applied to the estimated
unrolling cost when the dynamic savings are expected to be high.
When actually analyzing the loop, we now produce both an estimated
unrolled cost, and an estimated rolled cost. The rolled cost is notably
a dynamic estimate based on our analysis of the expected execution of
each iteration.
While we're still working to build up the infrastructure for making
these estimates, to me it is much more clear *how* to make them better
when they have reasonably descriptive names. For example, we may want to
apply estimated (from heuristics or profiles) dynamic execution weights
to the *dynamic* cost estimates. If we start doing that, we would also
need to track the static unrolled cost and the dynamic unrolled cost, as
only the latter could reasonably be weighted by profile information.
This patch is sadly not without functionality change for the new unroll
analysis logic. Buried in the heuristic management were several things
that surprised me. For example, we never subtracted the optimized
instruction count off when comparing against the unroll heursistics!
I don't know if this just got lost somewhere along the way or what, but
with the new accounting of things, this is much easier to keep track of
and we use the post-simplification cost estimate to compare to the
thresholds, and use the dynamic cost reduction ratio to select whether
we can exceed the baseline threshold.
The old values of these flags also don't necessarily make sense. My
impression is that none of these thresholds or discounts have been tuned
yet, and so they're just arbitrary placehold numbers. As such, I've not
bothered to adjust for the fact that this is now a discount and not
a tow-tier threshold model. We need to tune all these values once the
logic is ready to be enabled.
Differential Revision: http://reviews.llvm.org/D9966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239164 91177308-0d34-0410-b5e6-96231b3b80d8
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239151 91177308-0d34-0410-b5e6-96231b3b80d8
Add getFPUFeatures to TargetParser, which gets the list of subtarget features
that are enabled/disabled for each FPU, and use it when handling the .fpu
directive.
No functional change in this commit, though clang will start behaving
differently once it starts using this.
Differential Revision: http://reviews.llvm.org/D10237
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239150 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Only restoring AvailableFeatures is not enough and will lead to buggy behaviour.
For example, if we have a feature enabled and we ".set pop", the next time we try
to ".set" that feature nothing will happen because the "!(STI.getFeatureBits()[Feature])"
check will be false, because we didn't restore STI.FeatureBits.
In order to fix this, we need to make MipsAssemblerOptions remember the STI.FeatureBits
instead of the AvailableFeatures and then regenerate AvailableFeatures each time we ".set pop".
This is because, AFAIK, there is no way to convert from AvailableFeatures back to STI.FeatureBits,
but the reverse is possible by using ComputeAvailableFeatures(STI.FeatureBits).
I also moved the updating of AssemblerOptions inside the "if" statement in
setFeatureBits() and clearFeatureBits(), as there is no reason to update if
nothing changes.
Reviewers: dsanders, mkuper
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9156
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239144 91177308-0d34-0410-b5e6-96231b3b80d8
When we generate coverage data, we explicitly set each coverage map's
alignment to 8 (See InstrProfiling::lowerCoverageData), but when we
read the coverage data, we assume consecutive maps are exactly
adjacent. When we're dealing with 32 bit, maps can end on a 4 byte
boundary, causing us to think the padding is part of the next record.
Fix this by adjusting the buffer to an appropriately aligned address
between records.
This is pretty awkward to test, as it requires a binary with multiple
coverage maps to hit, so we'd need to check in multiple source files
and a binary blob as inputs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239129 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently this functionality isn't used in-tree (or I would go & make
the explicit unique_ptr constructions into implicit constructions to
make them more self documenting now that clone doesn't return a raw
owning pointer anymore) but only by the Julia frontend. This isn't
ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239091 91177308-0d34-0410-b5e6-96231b3b80d8
Originally committed in r237975, GCC 4.7 gave a compilation error
regarding "looser throw specification" though it seemed to be pointing
to a virtual defaulted dtor in a base class and an override defaulted
dtor in a derived class - so I'm not quite sure why/how they could end
up with different throw specifications. To simplify and reduce the risk
of this, I've just removed the pointless override in the derived class,
the base class's should be sufficient. *fingers crossed*
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239088 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we can look at users, we can trivially do this: when we would
have otherwise disabled GlobalMerge (currently -O<3), we can just run
it for minsize functions, as it's usually a codesize win.
Differential Revision: http://reviews.llvm.org/D10054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239087 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the FIXME and remove this old as(1) compat option. It was useful for
bringup of the integrated assembler to diff object files, but now it's
just causing more relocations than strictly necessary to be generated.
rdar://21201804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239084 91177308-0d34-0410-b5e6-96231b3b80d8
I made a few changes here in a couple of commits - breaking them out
into smaller ones in case I hit the GCC oddities again.
I'm still not /entirely/ sure what the issues were, so apologies if any
of these experiments break things again. Feel free to revert
immediately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239083 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Properly report the error in segment load commands from MachOObjectFile
constructor instead of crashing the program.
Adjust the test case accordingly.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239081 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently all load commands are parsed in MachOObjectFile constructor.
If the next load command cannot be parsed, or if command size is too
small, properly report it through the error code and fail to construct
the object, instead of crashing the program.
Test Plan: regression test suite
Reviewers: rafael, filcab
Subscribers: llvm-commits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239080 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid parsing object file each time MachOObjectFile::getHeader() is
called. Instead, cache the header in MachOObjectFile constructor, where
it's parsed anyway. In future, we must avoid constructing the object
at all if the header can't be parsed.
Test Plan: regression test suite.
Reviewers: rafael
Subscribers: llvm-commits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239075 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
-march=bpf -> host endian
-march=bpf_le -> little endian
-match=bpf_be -> big endian
Test Plan:
v1 was tested by IBM s390 guys and appears to be working there.
It bit rots too fast here.
Reviewers: chandlerc, tstellarAMD
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239071 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first of several patches to eliminate StringRef forms of GNU
triples from the internals of LLVM. After this is complete, GNU triples
will be replaced by a more authoratitive representation in the form of
an LLVM TargetTuple.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: ted, llvm-commits, rengolin, jholewinski
Differential Revision: http://reviews.llvm.org/D10236
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239036 91177308-0d34-0410-b5e6-96231b3b80d8
The fix is just that getOther had not been updated for packing the st_other
values in fewer bits and could return spurious values:
- unsigned Other = (getFlags() & (0x3f << ELF_STO_Shift)) >> ELF_STO_Shift;
+ unsigned Other = (getFlags() & (0x7 << ELF_STO_Shift)) >> ELF_STO_Shift;
Original message:
Pack the MCSymbolELF bit fields into MCSymbol's Flags.
This reduces MCSymolfELF from 64 bytes to 56 bytes on x86_64.
While at it, also make getOther/setOther easier to use by accepting unshifted
STO_* values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239012 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces MCSymolfELF from 64 bytes to 56 bytes on x86_64.
While at it, also make getOther/setOther easier to use by accepting unshifted
STO_* values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239006 91177308-0d34-0410-b5e6-96231b3b80d8
port it to the new pass manager.
All this does is extract the inner "location" class used by AA into its
own full fledged type. This seems *much* cleaner as MemoryDependence and
soon MemorySSA also use this heavily, and it doesn't make much sense
being inside the AA infrastructure.
This will also make it much easier to break apart the AA infrastructure
into something that stands on its own rather than using the analysis
group design.
There are a few places where this makes APIs not make sense -- they were
taking an AliasAnalysis pointer just to build locations. I'll try to
clean those up in follow-up commits.
Differential Revision: http://reviews.llvm.org/D10228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239003 91177308-0d34-0410-b5e6-96231b3b80d8
The first try (r238051) to land this was reverted due to ExecutionEngine build failure;
that was hopefully addressed by r238788.
The second try (r238842) to land this was reverted due to BUILD_SHARED_LIBS failure;
that was hopefully addressed by r238953.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239001 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now users don't have to manually deal with getFirstLoadCommandInfo() /
getNextLoadCommandInfo(), calculate the number of load segments, etc.
No functionality change.
Test Plan: regression test suite
Reviewers: rafael, lhames, loladiro
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10144
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238983 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids yet another last minute patching of the binding.
While at it, also simplify the weakref implementation a bit by not walking
past it in the expression evaluation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238982 91177308-0d34-0410-b5e6-96231b3b80d8
With this getBinging can now return the correct answer for all cases not
involving a .symver and the elf writer doesn't need to patch it last minute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238980 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
But still handle them the same way since I don't know how they differ on
this target.
Of these, /U[qytnms]/ do not have backend tests but are accepted by clang.
No functional change intended.
Reviewers: t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8203
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238921 91177308-0d34-0410-b5e6-96231b3b80d8
The ELF spec is very clear:
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238899 91177308-0d34-0410-b5e6-96231b3b80d8
Some temporary symbols are created by MC itself. These symbols are never used
for lookup and are never included in the object symbol table, so we can
avoid creating a name for them.
Other temporaries are created by CodeGen or by the user by explicitly asking
for a name starting with .L (or L on MachO).
These temporaries behave like regular symbols, we just try to avoid including
them in the object symbol table, but sometimes they end up there:
const char *foo() {
return "abc" + 3;
}
will have a relocation pointing to a .L symbol.
It just so happens that almost all MC created temporary has the AlwaysAddSuffix
option and CodeGen/user created ones don't.
One interesting future optimization would be to use unnamed symbols for
all temporaries, but that would require use an st_name of 0 or
having the object writer create the names if a symbol does end up in the
symbol table.
No testcase since this just avoid creating a few extra names for MC created
temporaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238887 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A later change that has RewriteStatepointsForGC change function
attributes throughout the module depends on this.
Reviewers: reames, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238882 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a dedicated type for ELF symbol, these helper functions can
become member function of MCSymbolELF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238864 91177308-0d34-0410-b5e6-96231b3b80d8
The first try (r238051) to land this was reverted due to bot failures
that were hopefully addressed by r238788.
This patch adds a TargetRecip class for processing many recip codegen possibilities.
The class is intended to handle both command-line options to llc as well
as options passed in from a front-end such as clang with the -mrecip option.
The x86 backend is updated to use the new functionality.
Only -mcpu=btver2 with -ffast-math should see a functional change from this patch.
All other x86 CPUs continue to *not* use reciprocal estimates by default with -ffast-math.
Differential Revision: http://reviews.llvm.org/D8982
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238842 91177308-0d34-0410-b5e6-96231b3b80d8
This create a MCSymbolELF class and moves SymbolSize since only ELF
needs a size expression.
This reduces the size of MCSymbol from 56 to 48 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238801 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to extract version numbers from the environment.
getOSVersion is currently overloaded for that purpose, this allows us to
clean it up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238796 91177308-0d34-0410-b5e6-96231b3b80d8
LLVMContext. Production builds of clang do not set names on most
Value's, so this is wasted space on almost all subclasses of Value.
This reduces the size of all Value subclasses by 8 bytes on 64 bit
hosts.
The one tricky part of this change is averting compile time regression
by keeping Value::hasName() fast. This required stealing bits out of
NumOperands.
With this change, peak memory usage on verify-uselistorder-nodbg.lto.bc
is decreased by approximately 2.3% (~3MB absolute on my machine).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238791 91177308-0d34-0410-b5e6-96231b3b80d8
If a dead instruction we may not only have a last-use in the main live
range but also in a subregister range if subregisters are tracked. We
need to partially rebuild live ranges in both cases.
The testcase only broke when subregister liveness was enabled. I
commited it in the current form because there is currently no flag to
enable/disable subregister liveness.
This fixes PR23720.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238785 91177308-0d34-0410-b5e6-96231b3b80d8
Start using C++ types such as StringRef and MemoryBuffer in the C++ LTO
API. In doing so, clarify the ownership of the native object file: the caller
now owns it, not the LTOCodeGenerator. The C libLTO library has been modified
to use a derived class of LTOCodeGenerator that owns the object file.
Differential Revision: http://reviews.llvm.org/D10114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238776 91177308-0d34-0410-b5e6-96231b3b80d8
According to the TBAA description struct-path tag node can have an optional IsConstant field. Add corresponding argument to MDBuilder::createTBAAStructTagNode.
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D10160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238749 91177308-0d34-0410-b5e6-96231b3b80d8
This is important because of different addressing modes
depending on the address space for GPU targets.
This only adds the argument, and does not update
any of the uses to provide the correct address space.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238723 91177308-0d34-0410-b5e6-96231b3b80d8
Alternatively, this type could be derived on-demand whenever
getResultElementType is called - if someone thinks that's the better
choice (simple time/space tradeoff), I'm happy to give it a go.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238716 91177308-0d34-0410-b5e6-96231b3b80d8
There is no MCSectionData, so the old name is now meaningless.
Also remove some asserts/checks that were there just because the information
they used was in MCSectionData.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238708 91177308-0d34-0410-b5e6-96231b3b80d8
Unreachable values may use themselves in strange ways due to their
dominance property. Attempting to translate through them can lead to
infinite recursion, crashing LLVM. Instead, claim that we weren't able
to translate the value.
This fixes PR23096.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238702 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug in the line info handling in the dwarf code, based on a
problem I when implementing RelocVisitor support for MachO.
Since addr+size will give the first address past the end of the function,
we need to back up one line table entry. Fix this by looking up the
end_addr-1, which is the last address in the range. Note that this also
removes a duplicate output from the llvm-rtdyld line table dump. The
relevant line is the end_sequence one in the line table and has an offset
of the first address part the end of the range and hence should not be
included.
Also factor out the common functionality into a separate function.
This comes up on MachO much more than on ELF, since MachO
doesn't store the symbol size separately, hence making
said situation always occur.
Differential Revision: http://reviews.llvm.org/D9925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238699 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds partial support for MachO relocations to RelocVisitor.
A simple test case is added to show that relocations are indeed being
applied and that using llvm-dwarfdump on MachO files no longer errors.
Correctness is not yet tested, due to an unrelated bug in DebugInfo,
which will be fixed with appropriate testcase in a followup commit.
Differential Revision: http://reviews.llvm.org/D8148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238663 91177308-0d34-0410-b5e6-96231b3b80d8
The plan was to move the whole table into the already existing ArchExtNames
but some fields depend on a table-generated file, and we don't yet have this
feature in the generic lib/Support side.
Once the minimum target-specific table-generated files are available in a
generic fashion to these libraries, we'll have to keep it in the ASM parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238651 91177308-0d34-0410-b5e6-96231b3b80d8
typeIsConvertibleTo was just calling baseClassOf(this) on the argument passed to it, but there weren't different signatures for baseClassOf so passing 'this' didn't really do anything interesting. typeIsConvertibleTo could have just been a non-virtual method in RecTy. But since that would be kind of a silly method, I instead re-distributed the logic from baseClassOf into typeIsConvertibleTo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238648 91177308-0d34-0410-b5e6-96231b3b80d8
.safeseh adds an entry to the .sxdata section to register all the
appropriate functions which may handle an exception. This entry is not
a relocation to the symbol but instead the symbol table index of the
function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238641 91177308-0d34-0410-b5e6-96231b3b80d8
around a value using its existing SDLoc.
Start using this in just one function to save omg lines of code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238638 91177308-0d34-0410-b5e6-96231b3b80d8
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238602 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We would wrap flow mappings and sequences when they go over a hardcoded 70
characters limit. Make the wrapping column configurable (and default to 70
co the change should be NFC for current users). Passing 0 allows to completely
suppress the wrapping which makes it easier to handle in tools like FileCheck.
Reviewers: bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10109
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238584 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In continuation to an earlier commit to DependenceAnalysis.cpp by jingyue (r222100), the type for all subscripts in a coupled group need to be the same since constraints from one subscript may be propagated to another during testing. During testing, new SCEVs may be created and the operands for these need to be the same.
This patch extends unifySubscriptType() to work on lists of subscript pairs, ensuring a common extended type for all of them.
Test Plan:
Added a test case to NonCanonicalizedSubscript.ll which causes dependence analysis to crash without this fix.
All regression tests pass.
Reviewers: spop, sebpop, jingyue
Reviewed By: jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9698
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238573 91177308-0d34-0410-b5e6-96231b3b80d8
MIOperands/ConstMIOperands are classes iterating over the MachineOperand
of a MachineInstr, however MachineInstr::mop_iterator does the same
thing.
I assume these two iterators exist to have a uniform interface to
iterate over the operands of a machine instruction bundle and a single
machine instruction. However in practice I find it more confusing to have 2
different iterator classes, so this patch transforms (nearly all) the
code to use mop_iterators.
The only exception being MIOperands::anlayzePhysReg() and
MIOperands::analyzeVirtReg() still needing an equivalent, I leave that
as an exercise for the next patch.
Differential Revision: http://reviews.llvm.org/D9932
This version is slightly modified from the proposed revision in that it
introduces MachineInstr::getOperandNo to avoid the extra counting
variable in the few loops that previously used MIOperands::getOperandNo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238539 91177308-0d34-0410-b5e6-96231b3b80d8
About pristine regsiters:
Pristine registers "hold a value that is useless to the current
function, but that must be preserved - they are callee saved registers
that have not been saved." This concept saves compile time as it frees
the prologue/epilogue inserter from adding every such register to every
basic blocks live-in list.
However the current code in getPristineRegs is formulated in a
complicated way: Inside the function prologue and epilogue all callee
saves are considered pristine, while in the rest of the code only the
non-saved ones are considered pristine. This requires logic to
differentiate between prologue/epilogue and the rest and in the presence
of shrink-wrapping this even becomes complicated/expensive. It's also
unnecessary because the prologue epilogue inserters already mark
callee-save registers that are saved/restores properly in the respective
blocks in the prologue/epilogue (see updateLiveness() in
PrologueEpilogueInserter.cpp). So only declaring non-saved/restored
callee saved registers as pristine just works.
Differential Revision: http://reviews.llvm.org/D10101
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238524 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces a serializable structure called
'llvm::yaml::MachineFunction' that stores the machine
function's name. This structure will mirror the machine
function's state in the future.
This commit prints machine functions as YAML documents
containing a YAML mapping that stores the state of a machine
function. This commit also parses the YAML documents
that contain the machine functions.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238519 91177308-0d34-0410-b5e6-96231b3b80d8
Need non-const iterator inserts too. These failures seem to be due to differences in the versions of libstdc++ on various operating systems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238516 91177308-0d34-0410-b5e6-96231b3b80d8
This moves all the state numbering code for C++ EH to WinEHPrepare so
that we can call it from the X86 state numbering IR pass that runs
before isel.
Now we just call the same state numbering machinery and insert a bunch
of stores. It also populates MachineModuleInfo with information about
the current function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238514 91177308-0d34-0410-b5e6-96231b3b80d8
I broke the polly build in r238505. This fixes the failure by adding non-const iterator erase methods to cl::list_storage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238509 91177308-0d34-0410-b5e6-96231b3b80d8
Originally landed r238485
MSVC resolves identifiers differently from Clang and GCC, this resulted in build bot failures. This pach re-lands r238485 and fixes the build failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238505 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This isn't necessarily an ideal change, and I want to at least reduce the API surface area, but for the new API we really shouldn't be relying on cl::list being a std::vector.
Reviewers: chandlerc
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238485 91177308-0d34-0410-b5e6-96231b3b80d8
Make createELFObjectFile() return object_error::parse_failed on
encountering invalid ELF file, instead of crashing the program.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238481 91177308-0d34-0410-b5e6-96231b3b80d8
BranchProbabilityInfo was leaking 3MB of memory when running 'opt -O2 verify-uselistorder.lto.bc'. This was due to the Weights member not being cleared once the pass is no longer needed.
This adds the releaseMemory override to clear that field. The other fields are cleared at the end of runOnFunction so can stay there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238462 91177308-0d34-0410-b5e6-96231b3b80d8
shrinking the Size and NumDefs fields to offset the size growth, and
reordering the fields to preserve a good packing.
This is necessary in the short term for adding a convergent flag, and
simultaneously future-proofs us against more flags being added in the
future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238445 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the 64-bit DWARF format, but is still limited to
less than 4GB of debug data by the DataExtractor class. Some versions
of the GNU MIPS toolchain generate 64-Bit DWARF even though it isn't
actually necessary.
Differential Revision: http://reviews.llvm.org/D1988
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238434 91177308-0d34-0410-b5e6-96231b3b80d8
