(and a bunch of other node types). While there, I
added a doNotCSE predicate and used it to reduce code
duplication (some of the duplicated code was wrong...).
This fixes ARM/cse-libcalls.ll when using LegalizeTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58249 91177308-0d34-0410-b5e6-96231b3b80d8
to have a different type to the vector element
type. This should be fairly harmless because in
the past guys like this were being built all over
the place (and were cleaned up when I added this
check). The reason for relaxing this check is
that it helps LegalizeTypes legalize vector
shuffles: the mask is a BUILD_VECTOR that it is
*not always possible* to legalize while keeping it
a BUILD_VECTOR (vector_shuffle requires the mask
to be a BUILD_VECTOR, as opposed to a vector with
the right vector type). With this check it is even
harder to legalize the mask - turning the check off
means that LegalizeTypes manages to legalize almost
all vector shuffles encountered in practice. The
correct solution is to change vector_shuffle to be a
variadic node with the mask built into it as operands.
While waiting for that change, this hack stops the
problem with vector_shuffle from blocking the turning
on of LegalizeTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57965 91177308-0d34-0410-b5e6-96231b3b80d8
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57885 91177308-0d34-0410-b5e6-96231b3b80d8
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57748 91177308-0d34-0410-b5e6-96231b3b80d8
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56885 91177308-0d34-0410-b5e6-96231b3b80d8
Completely eliminate the TopOrder std::vector. Instead, sort
the AllNodes list in place. This also eliminates the need to
call AllNodes.size(), a linear-time operation, before
performing the sort.
Also, eliminate the Sources temporary std::vector, since it
essentially duplicates the sorted result as it is being
built.
This also changes the direction of the topological sort
from bottom-up to top-down. The AllNodes list starts out in
roughly top-down order, so this reduces the amount of
reordering needed. Top-down is also more convenient for
Legalize, and ISel needed only minor adjustments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56867 91177308-0d34-0410-b5e6-96231b3b80d8
its size). Adjust various lowering functions to
pass this info through from CallInst. Use it to
implement sseregparm returns on X86. Remove
X86_ssecall calling convention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56677 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantPoolSDNode, using the target's preferred alignment for the
constant type.
In LegalizeDAG, when performing loads from the constant pool, the
ConstantPoolSDNode's alignment is used in the calls to getLoad and
getExtLoad.
This change prevents SelectionDAG::getLoad/getExtLoad from incorrectly
choosing the ABI alignment for constant pool loads when Alignment == 0.
The incorrect alignment is only a performance issue when ABI alignment
does not equal preferred alignment (i.e., on x86 it was generating
MOVUPS instead of MOVAPS for v4f32 constant loads when the default ABI
alignment for 128bit vectors is forced to 1 byte.)
Patch by Paul Redmond!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56253 91177308-0d34-0410-b5e6-96231b3b80d8
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56249 91177308-0d34-0410-b5e6-96231b3b80d8
Currently it just holds the calling convention and flags
for isVarArgs and isTailCall.
And it has several utility methods, which eliminate magic
5+2*i and similar index computations in several places.
CallSDNodes are not CSE'd. Teach UpdateNodeOperands to handle
nodes that are not CSE'd gracefully.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56183 91177308-0d34-0410-b5e6-96231b3b80d8
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56162 91177308-0d34-0410-b5e6-96231b3b80d8
with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55457 91177308-0d34-0410-b5e6-96231b3b80d8
works with.
SelectionDAG, FunctionLoweringInfo, and SelectionDAGLowering
objects now get created once per SelectionDAGISel instance, and
can be reused across blocks and across functions. Previously,
they were created and destroyed each time they were needed.
This reorganization simplifies the handling of PHI nodes, and
also SwitchCases, JumpTables, and BitTestBlocks. This
simplification has the side effect of fixing a bug in FastISel
where successor PHI nodes weren't being updated correctly.
This is also a step towards making the transition from FastISel
into and out of SelectionDAG faster, and also making
plain SelectionDAG faster on code with lots of little blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55450 91177308-0d34-0410-b5e6-96231b3b80d8
of two, and to not need a scratch std::vector. Also, use the
SelectionDAG's topological sort in LegalizeDAG instead of having
a separate implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55389 91177308-0d34-0410-b5e6-96231b3b80d8
RecyclingAllocator, but this change is needed for the nodes
to actually be recycled. This cuts SelectionDAG's memory
usage high-water-mark in half in some cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55351 91177308-0d34-0410-b5e6-96231b3b80d8
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55263 91177308-0d34-0410-b5e6-96231b3b80d8
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55219 91177308-0d34-0410-b5e6-96231b3b80d8
alignment and volatility information, such as loads and
stores, to reduce the number of integer values added to
the FoldingSetNodeID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55058 91177308-0d34-0410-b5e6-96231b3b80d8
returning an std::string by value, it fills in a SmallString/SmallVector
passed in. This significantly reduces string thrashing in some cases.
More specifically, this:
- Adds an operator<< and a print method for APInt that allows you to
directly send them to an ostream.
- Reimplements APInt::toString to be much simpler and more efficient
algorithmically in addition to not thrashing strings quite as much.
This speeds up llvm-dis on kc++ by 7%, and may also slightly speed up the
asmprinter. This also fixes a bug I introduced into the asmwriter in a
previous patch w.r.t. alias printing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54873 91177308-0d34-0410-b5e6-96231b3b80d8
can have a non-negative result; for example, -16%16 is 0. Also,
clarify the related comments. This fixes PR2670.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54767 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
