Only emit one PHI node for IV uses with identical bases and strides (after
moving foldable immediates to the load/store instruction).
This implements LoopStrengthReduce/dont_insert_redundant_ops.ll, allowing
us to generate this PPC code for test1:
or r30, r3, r3
.LBB_test1_1: ; Loop
li r2, 0
stw r2, 0(r30)
stw r2, 4(r30)
bl L_pred$stub
addi r30, r30, 8
cmplwi cr0, r3, 0
bne .LBB_test1_1 ; Loop
instead of this code:
or r30, r3, r3
or r29, r3, r3
.LBB_test1_1: ; Loop
li r2, 0
stw r2, 0(r29)
stw r2, 4(r30)
bl L_pred$stub
addi r30, r30, 8 ;; Two iv's with step of 8
addi r29, r29, 8
cmplwi cr0, r3, 0
bne .LBB_test1_1 ; Loop
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22635 91177308-0d34-0410-b5e6-96231b3b80d8
unify some parallel vectors and get field names more descriptive than
"first" and "second". This isn't lisp afterall :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22633 91177308-0d34-0410-b5e6-96231b3b80d8
map from instruction* to SCEVHandles. When we delete instructions, we have
to tell it about it. We would run into nasty cases where new instructions
were reallocated at old instruction addresses and get the old map values.
Bad bad bad :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22632 91177308-0d34-0410-b5e6-96231b3b80d8
consideration the case where a reference in an unreachable block could
occur. This fixes Transforms/SimplifyCFG/2005-08-01-PHIUpdateFail.ll,
something I ran into while bugpoint'ing another pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22584 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyLibCalls probably has to be audited to make sure it does not make
this mistake elsewhere. Also, if this code knows that the type will be
unsigned, obviously one arm of this is dead.
Reid, can you take a look into this further?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22566 91177308-0d34-0410-b5e6-96231b3b80d8
1 byte loads and other operations. This is bad for store-forwarding on
common CPUs. We now do this:
fnstcw WORD PTR [%ESP]
mov %AX, WORD PTR [%ESP]
instead of:
fnstcw WORD PTR [%ESP]
mov %AL, BYTE PTR [%ESP + 1]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22559 91177308-0d34-0410-b5e6-96231b3b80d8
target data to decide which loop induction variables to strength reduce
and how to do so. This work is mostly by Chris Lattner, with tweaks by
me to get it working on some of MultiSource.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22558 91177308-0d34-0410-b5e6-96231b3b80d8
FP-to-int-in-memory: this exposes the load from the stored slot to the
selection dag, allowing it to be folded into other operaions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22556 91177308-0d34-0410-b5e6-96231b3b80d8
that the X86 does not support to the legalizer. This allows it to be better
optimized, etc, and will help with SSE support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22551 91177308-0d34-0410-b5e6-96231b3b80d8
appended to a path string that didn't end in a slash, yielding invalid
path names.
Path contribute by Nicholas Riley.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22539 91177308-0d34-0410-b5e6-96231b3b80d8
near the GOT, which new doesn't do. So break out the allocate into a new function.
Also move GOT index handling into JITResolver. This lets it update the mapping when a Lazy
function is JITed. It doesn't managed the table, just the mapping. Note that this is
still non-ideal, as any function that takes a function address should also take a GOT
index, but that is a lot of changes. The relocation resolve process updates any GOT entry
it sees is out of date.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22537 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the LoadHiAddr pseudo-instruction.
Optimization of stores to and loads from statics.
Force JIT to use new non-PIC codepaths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22494 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first incremental patch to implement this feature. It adds no
functionality to LLVM but setup up the information needed from targets in
order to implement the optimization correctly. Each target needs to specify
the maximum number of store operations for conversion of the llvm.memset,
llvm.memcpy, and llvm.memmove intrinsics into a sequence of store operations.
The limit needs to be chosen at the threshold of performance for such an
optimization (generally smallish). The target also needs to specify whether
the target can support unaligned stores for multi-byte store operations.
This helps ensure the optimization doesn't generate code that will trap on
an alignment errors.
More patches to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22468 91177308-0d34-0410-b5e6-96231b3b80d8
vector that represents the .o file at once, build up a vector for each
section of the .o file. This is needed because the .o file writer needs
to be able to switch between sections as it emits them (e.g. switch
between the .text section and the .rel section when emitting code).
This patch has no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22453 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGLegalize::ExpandLegalUINT_TO_FP method.
Add a new method, PromoteLegalUINT_TO_FP, which allows targets to request
that UINT_TO_FP operations be promoted to a larger input type. This is
useful for targets that have some UINT_TO_FP or SINT_TO_FP operations but
not all of them (like X86).
The same should be done with SINT_TO_FP, but this patch does not do that
yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22447 91177308-0d34-0410-b5e6-96231b3b80d8
Add parenthesis around the value being negated; that way, if the value
begins with a minus sign (e.g. negative integer), we won't generate a
C predecrement operator by mistake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22437 91177308-0d34-0410-b5e6-96231b3b80d8
It is not safe to call LegalizeOp on something that has already been legalized.
Instead, just force another iteration of legalization.
This could affect all platforms but X86, as this codepath is dynamically
dead on X86 (ISD::MEMSET and friends are legal).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22419 91177308-0d34-0410-b5e6-96231b3b80d8
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22404 91177308-0d34-0410-b5e6-96231b3b80d8
Add a Mutex class for thread synchronization in a platform-independent way.
The current implementation only supports pthreads. Win32 use of Critical
Sections will be added later. The design permits other threading models to
be used if (and only if) pthreads is not available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22403 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the X86 Subtarget.
This consolidates the checks for target triple, and setting options based
on target triple into one place. This allows us to convert the asm printer
and isel over from being littered with "forDarwin", "forCygwin", etc. into
just having the appropriate flags for each subtarget feature controlling
the code for that feature.
This patch also implements indirect external and weak references in the
X86 pattern isel, for darwin. Next up is to convert over the asm printers
to use this new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22389 91177308-0d34-0410-b5e6-96231b3b80d8
allows objdump to know which function we are emitting to:
00000000 <foo>: <----
0: b8 01 00 00 00 mov $0x1,%eax
5: 03 44 24 04 add 0x4(%esp,1),%eax
9: c3 ret
... and allows .o files to be useful for linking :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22378 91177308-0d34-0410-b5e6-96231b3b80d8
Add a *VERY INITIAL* machine code emitter class. This is enough to take
this C function:
int foo(int X) { return X +1; }
and make objdump produce the following:
$ objdump -d t-llvm.o
t-llvm.o: file format elf32-i386
Disassembly of section .text:
00000000 <.text>:
0: b8 01 00 00 00 mov $0x1,%eax
5: 03 44 24 04 add 0x4(%esp,1),%eax
9: c3 ret
Anything using branches or refering to the constant pool or requiring
relocations will not work yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22375 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last MVTSDNode.
This allows us to eliminate a bunch of special case code for handling
MVTSDNodes.
Also, remove some uses of dyn_cast that should really be cast (which is
cheaper in a release build).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22368 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last MVTSDNode.
This allows us to eliminate a bunch of special case code for handling
MVTSDNodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22367 91177308-0d34-0410-b5e6-96231b3b80d8
MVTSDNode class. This class is used to provide an operand to operators
that require an extra type. We start by converting FP_ROUND_INREG and
SIGN_EXTEND_INREG over to using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22364 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use isValid() to check validity of the resulting path name in the
eraseSuffix even though we can't think of a case where eraseSuffix could
possibly cause an invalid path name.
2. Rewrite isValid() to not use the deprecated realpath function any more.
It now just uses isascii to make sure all the characters are legit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22359 91177308-0d34-0410-b5e6-96231b3b80d8
This chagne just renames some sys::Path methods to ensure they are not
misused. The Path documentation now divides methods into two dimensions:
Path/Disk and accessor/mutator. Path accessors and mutators only operate
on the Path object itself without making any disk accesses. Disk accessors
and mutators will also access or modify the file system. Because of the
potentially destructive nature of disk mutators, it was decided that all
such methods should end in the work "Disk" to ensure the user recognizes
that the change will occur on the file system. This patch makes that
change. The method name changes are:
makeReadable -> makeReadableOnDisk
makeWriteable -> makeWriteableOnDisk
makeExecutable -> makeExecutableOnDisk
setStatusInfo -> setStatusInfoOnDisk
createDirectory -> createDirectoryOnDisk
createFile -> createFileOnDisk
createTemporaryFile -> createTemporaryFileOnDisk
destroy -> eraseFromDisk
rename -> renamePathOnDisk
These changes pass the Linux Deja Gnu tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22354 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of the difference between file paths and directory paths. The Path
class now simply stores a path that can refer to either a file or a
directory. This required various changes in the implementation and interface
of the class with the corresponding impact to its users. Doxygen comments were
also updated to reflect these changes. Interface changes are:
appendDirectory -> appendComponent
appendFile -> appendComponent
elideDirectory -> eraseComponent
elideFile -> eraseComponent
elideSuffix -> eraseSuffix
renameFile -> rename
setDirectory -> set
setFile -> set
Changes pass Dejagnu and llvm-test/SingleSource tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22349 91177308-0d34-0410-b5e6-96231b3b80d8
Because the instcombine has to scan the entire function when it starts up
to begin with, we might as well do it in DFO so we can nuke unreachable code.
This fixes: Transforms/InstCombine/2005-07-07-DeadPHILoop.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22348 91177308-0d34-0410-b5e6-96231b3b80d8
module to the ELF file. Test it by adding support for emitting common
symbols. This allows us to compile this:
%X = weak global int 0
%Y = weak global int 0
%Z = weak global int 0
to an elf file that 'readelf's this:
Symbol table '.symtab' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000004 4 OBJECT GLOBAL DEFAULT COM X
2: 00000004 4 OBJECT GLOBAL DEFAULT COM Y
3: 00000004 4 OBJECT GLOBAL DEFAULT COM Z
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22343 91177308-0d34-0410-b5e6-96231b3b80d8
XMM registers. There are many known deficiencies and fixmes, which will be
addressed ASAP. The major benefit of this work is that it will allow the
LLVM register allocator to allocate FP registers across basic blocks.
The x86 backend will still default to x87 style FP. To enable this work,
you must pass -enable-sse-scalar-fp and either -sse2 or -sse3 to llc.
An example before and after would be for:
double foo(double *P) { double Sum = 0; int i; for (i = 0; i < 1000; ++i)
Sum += P[i]; return Sum; }
The inner loop looks like the following:
x87:
.LBB_foo_1: # no_exit
fldl (%esp)
faddl (%eax,%ecx,8)
fstpl (%esp)
incl %ecx
cmpl $1000, %ecx
#FP_REG_KILL
jne .LBB_foo_1 # no_exit
SSE2:
addsd (%eax,%ecx,8), %xmm0
incl %ecx
cmpl $1000, %ecx
#FP_REG_KILL
jne .LBB_foo_1 # no_exit
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22340 91177308-0d34-0410-b5e6-96231b3b80d8
1. Pass Value*'s into lowering methods so that the proper pointers can be
added to load/stores from the valist
2. Intrinsics that return void should only return a token chain, not a token
chain/retval pair.
3. Rename LowerVAArgNext -> LowerVAArg, because VANext is long gone.
4. Now that we have Value*'s available in the lowering methods, pass them
into any load/stores from the valist that are emitted
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22339 91177308-0d34-0410-b5e6-96231b3b80d8
1. Pass Value*'s into lowering methods so that the proper pointers can be
added to load/stores from the valist
2. Intrinsics that return void should only return a token chain, not a token
chain/retval pair.
3. Rename LowerVAArgNext -> LowerVAArg, because VANext is long gone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22338 91177308-0d34-0410-b5e6-96231b3b80d8
1: Legalize operand in UINT_TO_FP expanision
2: SRA x, const i8 was not promoting the constant to shift amount type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22337 91177308-0d34-0410-b5e6-96231b3b80d8
is at least overloading the right virtual methods. The implementations
are currently wrong though. This fixes Ptrdist/bc, but not other programs
(e.g. siod).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22326 91177308-0d34-0410-b5e6-96231b3b80d8
The optimization for locally used allocas was not safe for allocas that
were read before they were written. This change disables that optimization
in that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22318 91177308-0d34-0410-b5e6-96231b3b80d8
is a mismatch in their character type pointers (i.e. fprintf() prints an
array of ubytes while fwrite() takes an array of sbytes).
We can probably do better than this (such as casting the ubyte to an
sbyte).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22310 91177308-0d34-0410-b5e6-96231b3b80d8
