The COPY instruction is intended to replace the target specific copy
instructions for virtual registers as well as the EXTRACT_SUBREG and
INSERT_SUBREG instructions in MachineFunctions. It won't we used in a selection
DAG.
COPY is lowered to native register copies by LowerSubregs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107529 91177308-0d34-0410-b5e6-96231b3b80d8
list of predefined instructions appear. Add some consistency checks.
Ideally, TargetOpcodes.h should be produced by TableGen from Target.td, but it
is hardly worth the effort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107520 91177308-0d34-0410-b5e6-96231b3b80d8
This means that our Registers are now ordered R7, R8, R9, R10, R12, ...
Not R1, R10, R11, R12, R2, R3, ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104745 91177308-0d34-0410-b5e6-96231b3b80d8
structure that represents a mapping without any dependencies on SubRegIndex
numbering.
This brings us closer to being able to remove the explicit SubRegIndex
numbering, and it is now possible to specify any mapping without inventing
*_INVALID register classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104563 91177308-0d34-0410-b5e6-96231b3b80d8
sub-register indices and outputs a single super register which is formed from
a consecutive sequence of registers.
This is used as register allocation / coalescing aid and it is useful to
represent instructions that output register pairs / quads. For example,
v1024, v1025 = vload <address>
where v1024 and v1025 forms a register pair.
This really should be modelled as
v1024<3>, v1025<4> = vload <address>
but it would violate SSA property before register allocation is done.
Currently we use insert_subreg to form the super register:
v1026 = implicit_def
v1027 - insert_subreg v1026, v1024, 3
v1028 = insert_subreg v1027, v1025, 4
...
= use v1024
= use v1028
But this adds pseudo live interval overlap between v1024 and v1025.
We can now modeled it as
v1024, v1025 = vload <address>
v1026 = REG_SEQUENCE v1024, 3, v1025, 4
...
= use v1024
= use v1026
After coalescing, it will be
v1026<3>, v1025<4> = vload <address>
...
= use v1026<3>
= use v1026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102815 91177308-0d34-0410-b5e6-96231b3b80d8
same vt multiple times for a register. For example,
ECX is in 5 different i32 reg classes, just return
1 i32 instead of 5.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99727 91177308-0d34-0410-b5e6-96231b3b80d8
dag isel gen instead of instruction properties. This
allows the oh-so-useful behavior of matching a variadic
non-root node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98934 91177308-0d34-0410-b5e6-96231b3b80d8
record* -> instrinfo instead of std::string -> instrinfo.
This speeds up tblgen on cellcpu from 7.28 -> 5.98s with a debug
build (20%).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98916 91177308-0d34-0410-b5e6-96231b3b80d8
changing the primary datastructure from being a
"std::vector<unsigned char>" to being a new TypeSet class
that actually has (gasp) invariants!
This changes more things than I remember, but one major
innovation here is that it enforces that named input
values agree in type with their output values.
This also eliminates code that transparently assumes (in
some cases) that SDNodeXForm input/output types are the
same, because this is wrong in many case.
This also eliminates a bug which caused a lot of ambiguous
patterns to go undetected, where a register class would
sometimes pick the first possible type, causing an
ambiguous pattern to get arbitrary results.
With all the recent target changes, this causes no
functionality change!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98534 91177308-0d34-0410-b5e6-96231b3b80d8
into TargetOpcodes.h. #include the new TargetOpcodes.h
into MachineInstr. Add new inline accessors (like isPHI())
to MachineInstr, and start using them throughout the
codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95687 91177308-0d34-0410-b5e6-96231b3b80d8
unused DECLARE instruction.
KILL is not yet used anywhere, it will replace TargetInstrInfo::IMPLICIT_DEF
in the places where IMPLICIT_DEF is just used to alter liveness of physical
registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83006 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
and argument positions but only to the overloaded intrinsic parameters.
Keep a separate list of these overloaded parameters in CodeGenTarget.cpp
so they can be resolved easily. Remove assertions from IntrinsicEmitter.cpp:
they were harmless but confusing, and the assertions elsewhere in TableGen
will catch any incorrect values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69316 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68961 91177308-0d34-0410-b5e6-96231b3b80d8
target directories themselves. This also means that VMCore no longer
needs to know about every target's list of intrinsics. Future work
will include converting the PowerPC target to this interface as an
example implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63765 91177308-0d34-0410-b5e6-96231b3b80d8
to handle LLVMMatchType intrinsic parameters, and by adding new subclasses
of LLVMMatchType to match vector types with integral elements that are
either twice as wide or half as wide as the elements of the matched type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61834 91177308-0d34-0410-b5e6-96231b3b80d8
