Mixing of AddAvailableValue and GetValueAtEndOfBlock methods of SSAUpdater
leaded to the endless loop generation when the nested loops annotated.
This fixes a bug in the OCL_ML/KNN OpenCV test. The test case is too
complex for FileCheck and would be very fragile.
Patch by: Elena Denisova
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211374 91177308-0d34-0410-b5e6-96231b3b80d8
When small arguments (structures < 8 bytes or "float") are passed in a
stack slot in the ppc64 SVR4 ABI, they must reside in the least
significant part of that slot. On BE, this means that an offset needs
to be added to the stack address of the parameter, but on LE, the least
significant part of the slot has the same address as the slot itself.
This changes the PowerPC back-end ABI code to only add the small
argument stack slot offset for BE. It also adds test cases to verify
the correct behavior on both BE and LE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211368 91177308-0d34-0410-b5e6-96231b3b80d8
Targets can assume that a target streamer is present, so they have to be able
to construct a null streamer in order to set the target streamer in it to.
Fixes a crash when using the null streamer with arm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211358 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support to recognize patterns such as fadd,fsub,fadd,fsub.../add,sub,add,sub... and
vectorizes them as vector shuffles if they are profitable.
These patterns of vector shuffle can later be converted to instructions such as addsubpd etc on X86.
Thanks to Arnold and Hal for the reviews. http://reviews.llvm.org/D4015
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211339 91177308-0d34-0410-b5e6-96231b3b80d8
instructions available as synthetic SDNodes PACKSS and PACKUS that will
select to the correct instruction variants based on the return type.
This allows us to use these rather important instructions when lowering
vector shuffles.
Also moves the relevant instruction definitions to be split out from
the fully generic multiclasses to allow them to match these new SDNodes
in the same way that the UNPCK instructions do.
No functionality should actually be changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211332 91177308-0d34-0410-b5e6-96231b3b80d8
the atomic load linked expander pass to run for a particular
subtarget. This requires a check of the subtarget and so save
the TargetMachine rather than only TargetLoweringInfo and update
all callers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211314 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Some small modifications to the original patch: we now error if
it's not possible to expand an instruction (mips-expansions-bad.s has some
examples). Added some comments to the expansions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The functions that do the expansion now return false on success and true otherwise. This is so
we can catch some errors during the expansion (e.g.: immediate too large). The next patch adds some test cases.
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211269 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, the backend was unable to fold a build_vector dag
node with UNDEF operands into a single horizontal add/sub.
This patch teaches how to combine a build_vector with UNDEF operands into a
horizontal add/sub when possible. The algorithm conservatively avoids to combine
a build_vector with only a single non-UNDEF operand.
Added test haddsub-undef.ll to verify that we correctly fold horizontal binop
even in the presence of UNDEFs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211265 91177308-0d34-0410-b5e6-96231b3b80d8
We would get confused by '@' characters in symbol names, we would
mistake the text following them for the variant kind.
When an identifier a string, the variant kind will never show up inside
of it. Instead, check to see if there is a variant following the
string.
This fixes PR19965.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211249 91177308-0d34-0410-b5e6-96231b3b80d8
These will be used for custom lowering and for library
implementations of various math functions, so it's useful
to expose these as builtins.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211247 91177308-0d34-0410-b5e6-96231b3b80d8
This required untangling a mess of headers that included around.
This a recommit of r210953 with a fix for the removed accessor
for JITInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211233 91177308-0d34-0410-b5e6-96231b3b80d8
The difference from rint isn't really relevant here,
so treat them as equivalent. OpenCL doesn't have nearbyint,
so this is sort of pointless other than for completeness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211229 91177308-0d34-0410-b5e6-96231b3b80d8
This contains all the previous patches + getlod support on top of it.
It doesn't use SDNodes anymore, so it's quite small.
It also adds v16i8 to SReg_128, which is used for the sampler descriptor.
Reviewed-by: Tom Stellard
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211228 91177308-0d34-0410-b5e6-96231b3b80d8
When looking at the 64-bit SVR4 indirect call sequence, I noticed
an unnecessary load of r12. And indeed the code says:
// R12 must contain the address of an indirect callee.
But this is not correct; in the 64-bit SVR4 (ELFv1) ABI, there is
no need to load r12 at this point. It seems this code and comment
is a remnant of code originally shared with the Darwin ABI ...
This patch simply removes the unnecessary load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211203 91177308-0d34-0410-b5e6-96231b3b80d8
ARMTargetStreamer implements ConstantPool and AssmeblerConstantPools
to keep track of assembler-generated constant pools that are used for
ldr-pseudo.
When implementing ldr-pseudo for AArch64, these two classes can be reused.
So this patch factors them out from ARM target to the general MC lib.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211198 91177308-0d34-0410-b5e6-96231b3b80d8
During an indirect function call sequence on the 64-bit SVR4 ABI,
generate code must load and then restore the TOC register.
This does not use a regular LOAD instruction since the TOC
register r2 is marked as reserved. Instead, the are two
special instruction patterns:
let RST = 2, DS = 2 in
def LDinto_toc: DSForm_1a<58, 0, (outs), (ins g8rc:$reg),
"ld 2, 8($reg)", IIC_LdStLD,
[(PPCload_toc i64:$reg)]>, isPPC64;
let RST = 2, DS = 10, RA = 1 in
def LDtoc_restore : DSForm_1a<58, 0, (outs), (ins),
"ld 2, 40(1)", IIC_LdStLD,
[(PPCtoc_restore)]>, isPPC64;
Note that these not only restrict the destination of the
load to r2, but they also restrict the *source* of the
load to particular address combinations. The latter is
a problem when we want to support the ELFv2 ABI, since
there the TOC save slot is no longer at 40(1).
This patch replaces those two instructions with a single
instruction pattern that only hard-codes r2 as destination,
but supports generic addresses as source. This will allow
supporting the ELFv2 ABI, and also helps generate more
efficient code for calls to absolute addresses (allowing
simplification of the ppc64-calls.ll test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211193 91177308-0d34-0410-b5e6-96231b3b80d8
Note that I followed the AVX2 convention here and didn't add LLVM intrinsics
for stores. These can be generated with the nontemporal hint on LLVM IR
stores (see new test). The GCC builtins are lowered directly into nontemporal
stores.
<rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211176 91177308-0d34-0410-b5e6-96231b3b80d8
Use the max 64-bit element size with EVEX_CD8. This should work since element
size is ignored for a full-vector access (FVM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211175 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC back-end uses BLA to implement calls to functions at
known-constant addresses, which is apparently used for certain
system routines on Darwin.
However, with the 64-bit SVR4 ABI, this is actually incorrect.
An immediate function pointer value on this platform is not
directly usable as a target address for BLA:
- in the ELFv1 ABI, the function pointer value refers to the
*function descriptor*, not the code address
- in the ELFv2 ABI, the function pointer value refers to the
global entry point, but BL(A) would only be correct when
calling the *local* entry point
This bug didn't show up since using immediate function pointer
values is not usually done in the 64-bit SVR4 ABI in the first
place. However, I ran into this issue with a certain use case
of LLVM as JIT, where immediate function pointer values were
uses to implement callbacks from JITted code to helpers in
statically compiled code.
Fixed by simply not using BLA with the 64-bit SVR4 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211174 91177308-0d34-0410-b5e6-96231b3b80d8
My patch r204634 to emit instructions in little-endian format failed to
handle those special cases where we emit a pair of instructions from a
single LLVM MC instructions (like the bl; nop pairs used to implement
the call sequence).
In those cases, we still need to emit the "first" instruction (the one
in the more significant word) first, on both big and little endian,
and not swap them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211171 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211160 91177308-0d34-0410-b5e6-96231b3b80d8
