Summary:
This fixes an issue on MIPS where the infinite-loop-evergreen.ll test
was failing to terminate.
Fixes PR24147.
Reviewers: arsenm, dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242410 91177308-0d34-0410-b5e6-96231b3b80d8
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242409 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The checking pointer grouping algorithm assumes that the
starts/ends of the pointers are well formed (start <= end).
The runtime memory checking algorithm also assumes this by doing:
start0 < end1 && start1 < end0
to detect conflicts. This check only works if start0 <= end0 and
start1 <= end1.
This change correctly orders the interval ends by either checking
the stride (if it is constant) or by using min/max SCEV expressions.
Reviewers: anemet, rengolin
Subscribers: rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242400 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
This should no longer cause miscompiles, now that a bug in emitPrologue was fixed in r242395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242398 91177308-0d34-0410-b5e6-96231b3b80d8
When X86FrameLowering::emitPrologue() looks for where to insert the %esp subtraction
to allocate stack space for local allocations, it assumes that any sequence of push
instructions that starts at function entry consists purely of spills of callee-save
registers.
This may be false, since from some point forward, the pushes may pushing arguments
to a subsequent function call.
This caused a miscompile that was exposed by r240257, and is not easily testable
since r240257 was reverted. A test will be committed separately after r240257 is
reapplied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242395 91177308-0d34-0410-b5e6-96231b3b80d8
This extension point allows passes to be executed right before the vectorizer
and other highly target specific optimizations are run.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242389 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
The ExecutionEngine will act as an exception and will be unsafe to
be reused across context. We don't enforce this rule but undefined
behavior can occurs if the user tries to do it.
Reviewers: lhames
Subscribers: echristo, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11110
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242387 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242386 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242385 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Because llvm-dsymutil is using ASMPrinter without any MachineFunction
of Module available.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11078
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242384 91177308-0d34-0410-b5e6-96231b3b80d8
This is made a static public member function to allow the transition of
this logic from LAA to LoopDistribution. (Technically, it could be an
implementation-local static function but then it would not be accessible
from LoopDistribution.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242376 91177308-0d34-0410-b5e6-96231b3b80d8
It miscompiles some code and a reduced test case has been sent to the
author.
This reverts commit r240257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242373 91177308-0d34-0410-b5e6-96231b3b80d8
Revert the changes to the C API LLVMBuildLandingPad that were part of
the personality function move. We now set the personality on the parent
function when the C API attempts to construct a landingpad with a
personality.
This reverts commit r240010.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242372 91177308-0d34-0410-b5e6-96231b3b80d8
The testcase failed on non X86 targets, because I forgot to pass the
'-march=x86-64' option into llc for one of the X86 specific tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242370 91177308-0d34-0410-b5e6-96231b3b80d8
pairs for 32-bit immediates.
This change is needed to avoid emitting movt/movw pairs when doing LTO
and do so on a per-function basis.
Out-of-tree projects currently using cl::opt option -arm-use-movt=0 or
false to avoid emitting movt/movw pairs should make changes to add
subtarget feature "+no-movt" (see the changes made to clang in r242368).
rdar://problem/21529937
Differential Revision: http://reviews.llvm.org/D11026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242369 91177308-0d34-0410-b5e6-96231b3b80d8
The pass here was clearing kill flags on instructions which had
their sources killed in the instruction being combined. But
given that the new instruction is inserted after the existing ones,
any existing instructions with kill flags will lead to the verifier
complaining that we are reading an undefined physreg.
For example, what we had prior to this optimization is
t2STRi12 %R1, %SP, 12
t2STRi12 %R1<kill>, %SP, 16
t2STRi12 %R0<kill>, %SP, 8
and prior to this fix that would generate
t2STRi12 %R1<kill>, %SP, 16
t2STRDi8 %R0<kill>, %R1, %SP, 8
This is clearly incorrect as it didn't clear the kill flag on R1
used with offset 16 because there was no kill flag on the instruction
with offset 12.
After this change we clear the kill flag on the offset 16 instruction
because we know it will be used afterwards in the new instruction.
I haven't provided a test case. I have a small test, but even it is
very sensitive to register allocation order which isn't ideal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242359 91177308-0d34-0410-b5e6-96231b3b80d8
The jump table info is serialized using a YAML mapping that contains its kind
and a YAML sequence of jump table entries. A jump table entry is a YAML mapping
that has an ID and an inline YAML sequence of machine basic block references.
The testcase 'CodeGen/MIR/X86/jump-table-info.mir' doesn't have any instructions
because one of them contains a jump table index operand. The jump table index
operands will be serialized in a follow up patch, and the appropriate
instructions will be added to this testcase.
Reviewers: Duncan P. N. Exon Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242357 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a trivial code change with no functionality effect.
When LoopUnswitch determines trivial unswitch condition, it checks whether the loop header's terminator instruction is a branch instruction or switch instruction since trivial unswitch condition can only apply to these two instruction types. The current code does not fail the check directly on other instruction types, but check the nullness of LoopExitBB variable instead. The added else clause makes the check fail immediately on other instruction types and makes the code more obvious.
Reviewers: reames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242345 91177308-0d34-0410-b5e6-96231b3b80d8
On some systems (e.g. Mac OS X), sed will add a newline to the end of
the output if there wasn't one already. This would cause false
cmp errors since the .o file from Phase 2 was passed through sed and
the one from Phase 3 wasn't. Work around this by passing both through
sed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242341 91177308-0d34-0410-b5e6-96231b3b80d8
Pass a const reference to LiveRegMatrix to getRegAllocationHints()
because some targets can prodive better hints if they can test whether a
physreg has been used for register allocation yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242340 91177308-0d34-0410-b5e6-96231b3b80d8
This commit serializes the references to the named LLVM alloca instructions from
the stack objects in the machine frame info. This commit adds a field 'Name' to
the struct 'yaml::MachineStackObject'. This new field is used to store the name
of the alloca instruction when the alloca is present and when it has a name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242339 91177308-0d34-0410-b5e6-96231b3b80d8
emit debug info, according to the preferences of the different
debuggers used on various targets.
Darwin and FreeBSD default to tuning for LLDB; PS4 defaults to tuning for
the SCE (Sony Computer Entertainment) debugger. All others default to GDB.
Differential Revision: http://reviews.llvm.org/D8506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242338 91177308-0d34-0410-b5e6-96231b3b80d8
Self-referential constants containing references to a merged function
no longer cause the MergeFunctions pass to infinite loop. Also adds a
reproduction IR which would otherwise fail, which was isolated from a similar
issue in Chromium.
Author: jrkoenig
Reviewers: nlewycky, jfb
Subscribers: llvm-commits, nlewycky, jfb
Differential Revision: http://reviews.llvm.org/D11208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242337 91177308-0d34-0410-b5e6-96231b3b80d8
It retains the possibility to use the autoconf build with a
command-line option ('-use-autoconf'), and uses that by default on Darwin since
compiler-rt requires it on that platform.
This commit also removes the "Release-64" flavour and related logic. The script
would previously do two builds unless the '-no-64bit' flag was passed, but on
my machine and from those I asked this always ended up producing two 64-bit builds,
causing much confusion.
It also removes the -build-triple option, which caused the --build= flag to
get passed to ./configure. This was presumably intended for cross-compiling,
but none of the release testers use it. If someone does want to pass it,
they can use '-configure-flags --build=foo' instead.
Differential Revision: http://reviews.llvm.org/D10715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242331 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch allows phi nodes like
%x = phi [ %incptr, ... ] [ %var, ... ]
%incptr = getelementptr %x, 1
to be analyzed by BasicAliasAnalysis.
In aliasPHI, we can detect incoming values that are recursive GEPs with a
constant offset. Instead of trying to analyze a recursive GEP (and failing),
we now ignore it and instead set the size of the memory referenced by
the PHINode to UnknownSize. This represents all the possible memory
locations the pointer represented by the PHINode could be advanced to
by the GEP.
For now, this new behavior is turned off by default to allow debugging of
performance degradations seen with SPEC/x86 and Hexagon benchmarks.
The flag -basicaa-recphi turns it on.
Reviewers: hfinkel, sanjoy
Subscribers: tobiasvk_caf, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D10368
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242320 91177308-0d34-0410-b5e6-96231b3b80d8
This is a necessary prerequisite for bootstrapping the emission
of debug info inside modules.
- Adds a FlagExternalTypeRef to DICompositeType.
External types must have a unique identifier.
- External type references are emitted using a forward declaration
with a DW_AT_signature([DW_FORM_ref_sig8]) based on the UID.
http://reviews.llvm.org/D9612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242302 91177308-0d34-0410-b5e6-96231b3b80d8
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242300 91177308-0d34-0410-b5e6-96231b3b80d8
The vec_sld interface provides access to the vsldoi instruction.
Unlike most of the vec_* interfaces, we do not attempt to change the
generated code for vec_sld based on the endian mode. It is too
difficult to correctly infer the desired semantics because of
different element types, and the corrected instruction sequence is
expensive, involving loading a permute control vector and performing a
generalized permute.
For GCC, this was implemented as "Don't touch the vec_sld"
implementation. When it came time for the LLVM implementation, I did
the same thing. However, this was hasty and incorrect. In LLVM's
version of altivec.h, vec_sld was previously defined in terms of the
vec_perm interface. Because vec_perm semantics are adjusted for
little endian, this means that leaving vec_sld untouched causes it to
generate something different for LE than for BE. Not good.
This back-end patch accompanies the changes to altivec.h that change
vec_sld's behavior for little endian. Those changes mean that we see
slightly different code in the back end when trying to recognize a
VSLDOI instruction in isVSLDOIShuffleMask. In particular, a
ShuffleKind of 1 (where the two inputs are identical) must now be
treated the same way as a ShuffleKind of 2 (little endian with
different inputs) when little endian mode is in force. This is
because ShuffleKind of 1 is defined using big-endian numbering.
This has a ripple effect on LowerBUILD_VECTOR, where we create our own
internal VSLDOI instructions. Because these are a ShuffleKind of 1,
they will now have their shift amounts subtracted from 16 when
recognizing the shuffle mask. To avoid problems we have to subtract
them from 16 again before creating the VSLDOI instructions.
There are a couple of other uses of BuildVSLDOI, but these do not need
to be modified because the shift amount is 8, which is unchanged when
subtracted from 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242296 91177308-0d34-0410-b5e6-96231b3b80d8
