1. If we are two-addressing a commutable instruction and the LHS is not the
last use of the variable, see if the instruction is the last use of the
RHS. If so, commute the instruction, allowing us to avoid a
register-register copy in many cases for common instructions like ADD, OR,
AND, etc on X86.
2. If #1 doesn't hold, and if this is an instruction that also existing in
3-address form, promote the instruction to a 3-address instruction to
avoid the register-register copy. We can do this for several common
instructions in X86, including ADDrr, INC, DEC, etc.
This patch implements test/Regression/CodeGen/X86/commute-two-addr.ll,
overlap-add.ll, and overlap-shift.ll when I check in the X86 support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19245 91177308-0d34-0410-b5e6-96231b3b80d8
Make only one print method to avoid overloaded virtual warnings when \
compiled with -Woverloaded-virtual
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18589 91177308-0d34-0410-b5e6-96231b3b80d8
* Do not put fixed registers into the unhandled set. This means they will
never find their way into the inactive, active, or handled sets, so we
can simplify a bunch of code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17945 91177308-0d34-0410-b5e6-96231b3b80d8
the iterator hints we have to speed up overlaps(). This speeds linscan up
by about .2s (out of 8.7) on 175.vpr for PPC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17935 91177308-0d34-0410-b5e6-96231b3b80d8
* Eliminate the releaseMemory method, this is not an analysis
* Change the fixed, active, and inactive lists of intervals to maintain an
iterator for the current position in the interval. This allows us to do
constant time increments of the iterator instead of having to do a binary
search to find our liverange in our liveinterval all of the time, which
substantially speeds up cases where LiveIntervals have many LiveRanges
- which is very common for physical registers. On targets with many
physregs, this can make a noticable difference.
With a release build of LLC for PPC, this halves the time in
processInactiveIntervals and processActiveIntervals, from 1.5s to .75s.
This also lays the ground for more to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17933 91177308-0d34-0410-b5e6-96231b3b80d8
useful when you have a reference like:
int A[100];
void foo() { A[10] = 1; }
In this case, &A[10] is a single constant and should be treated as such.
Only MO_GlobalAddress and MO_ExternalSymbol are allowed to use this field, no
other operand type is.
This is another fine patch contributed by Jeff Cohen!!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17007 91177308-0d34-0410-b5e6-96231b3b80d8
The problem occurred when trying to reload this instruction:
MOV32mr %reg2326, 8, %reg2297, 4, %reg2295
The value of reg2326 was available in EBX, so it was reused from there, instead
of reloading it into EDX.
The value of reg2297 was available in EDX, so it was reused from there, instead
of reloading it into EDI.
The value of reg2295 was not available, so we tried reloading it into EBX, its
assigned register. However, we checked and saw that we already reloaded
something into EBX, so we chose what reg2326 was assigned to (EDX) and reloaded
into that register instead.
Unfortunately EDX had already been used by reg2297, so reloading into EDX
clobbered the value used by the reg2326 operand, breaking the program.
The fix for this is to check that the newly picked register is ok. In this
case we now find that EDX is already used and try using EDI, which succeeds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17006 91177308-0d34-0410-b5e6-96231b3b80d8
it was a use, def, or both. This allows us to be less pessimistic in our
analysis of them. In practice, this doesn't make a big difference, but it
doesn't hurt either.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16632 91177308-0d34-0410-b5e6-96231b3b80d8
and delete them if they turn out to be dead. This is a useful little hack
that even speeds up some programs. For example, it speeds up Ptrdist/ks
from 17.53s to 15.59s, and 188.ammp from 149s to 146s.
This also speeds up llc :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16630 91177308-0d34-0410-b5e6-96231b3b80d8
generated code over the simple spiller. The new local spiller generates
substantially better code than the simple one in some cases, by reusing
values that are loaded out of stack slots and kept available in registers.
This primarily helps programs that are spilling a lot, and there is still
stuff that can be done to improve it. This patch makes the local spiller
the default, as it's only a tiny bit slower than the simple spiller (it
increases the runtime of llc by < 1%).
Here are some numbers with speedups.
Program #reuse old(s) new(s) Speedup
Povray: 3452, 16.87 -> 15.93 (5.5%)
177.mesa: 2176, 2.77 -> 2.76 (0%)
179.art: 35, 28.43 -> 28.01 (1.5%)
183.equake: 55, 61.44 -> 61.41 (0%)
188.ammp: 869, 174 -> 149 (15%)
164.gzip: 43, 40.73 -> 40.71 (0%)
175.vpr: 351, 18.54 -> 17.34 (6.5%)
176.gcc: 2471, 5.01 -> 4.92 (1.8%)
181.mcf 42, 79.30 -> 75.20 (5.2%)
186.crafty: 484, 29.73 -> 30.04 (-1%)
197.parser: 251, 10.47 -> 10.67 (-1%)
252.eon: 1501, 1.98 -> 1.75 (12%)
253.perlbm: 1183, 14.83 -> 14.42 (2.8%)
254.gap: 825, 7.46 -> 7.29 (2.3%)
255.vortex: 285, 10.51 -> 10.27 (2.3%)
256.bzip2: 63, 55.70 -> 55.20 (0.9%)
300.twolf: 830, 21.63 -> 22.00 (-1%)
PtrDist/ks 14, 32.75 -> 17.53 (46.5%)
Olden/tsp 46, 8.71 -> 8.24 (5.4%)
Free/distray 70, 1.09 -> 0.99 (9.2%)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16629 91177308-0d34-0410-b5e6-96231b3b80d8
* Add const_iterator stuff
* Add a print method, which means that I can now call dump() from the
debugger.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16612 91177308-0d34-0410-b5e6-96231b3b80d8
two spillers produce perfectly identical code (at least on povray and eon),
but the simple spiller is substantially faster than the local spiller. Once
the local spiller is improved, we can switch back.
Switching cuts 5.2% off of the llc time for povray (about 1.3s).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16608 91177308-0d34-0410-b5e6-96231b3b80d8
use a simple vector. This speeds up -spiller=simple from taking 22s to taking
.1s on povray (debug build). This change does not modify the generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16607 91177308-0d34-0410-b5e6-96231b3b80d8
data structures). Fix the print method to send to the right ostream, not
always cerr. Delete typedefs that are only used once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16606 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
lists. Instead of scanning the vector backwards, scan it forward and
swap each element we want to erase. Then at the end erase all removed
intervals at once. This doesn't save much: 0.08s out of 4s when
compiling 176.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16136 91177308-0d34-0410-b5e6-96231b3b80d8
