Machine Sink uses loop depth information to select between successors BBs to
sink machine instructions into, where BBs within smaller loop depths are
preferable. This patch adds support for choosing between successors by using
profile information from BlockFrequencyInfo instead, whenever the information
is available.
Tested it under SPEC2006 train (average of 30 runs for each program); ~1.5%
execution speedup in average on x86-64 darwin.
<rdar://problem/18021659>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218472 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I originally tried doing this specifically for X86 in the backend in D5091,
but it was rather brittle and generally running too late to be general.
Furthermore, other targets may want to implement similar optimizations.
So I reimplemented it at the IR-level, fitting it into AtomicExpandPass
as it interacts with that pass (which could not be cleanly done before
at the backend level).
This optimization relies on a new target hook, which is only used by X86
for now, as the correctness of the optimization on other targets remains
an open question. If it is found correct on other targets, it should be
trivial to enable for them.
Details of the optimization are discussed in D5091.
Test Plan: make check-all + a new test
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218455 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions do not indicate they are extendable or the
number of bits in the extendable operand. Rename to match
architected names. Add a testcase for the intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218453 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218451 91177308-0d34-0410-b5e6-96231b3b80d8
v4f64 and v8f32 shuffles when they are lane-crossing. We have fully
general lane-crossing permutation functions in AVX2 that make this easy.
Part of this also changes exactly when and how these vectors are split
up when we don't have AVX2. This isn't always a win but it usually is
a win, so on the balance I think its better. The primary regressions are
all things that just need to be fixed anyways such as modeling when
a blend can be completely accomplished via VINSERTF128, etc.
Also, this highlights one of the few remaining big features: we do
a really poor job of inserting elements into AVX registers efficiently.
This completes almost all of the big tricks I have in mind for AVX2. The
only things left that I plan to add:
1) element insertion smarts
2) palignr and other fairly specialized lowerings when they happen to
apply
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218449 91177308-0d34-0410-b5e6-96231b3b80d8
256-bit vectors with lane-crossing.
Rather than immediately decomposing to 128-bit vectors, try flipping the
256-bit vector lanes, shuffling them and blending them together. This
reduces our worst case shuffle by a pretty significant margin across the
board.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218446 91177308-0d34-0410-b5e6-96231b3b80d8
lowering where it only used the mask of the low 128-bit lane rather than
the entire mask.
This allows the new lowering to correctly match the unpack patterns for
v8i32 vectors.
For reference, the reason that we check for the the entire mask rather
than checking the repeated mask is because the repeated masks don't
abide by all of the invariants of normal masks. As a consequence, it is
safer to use the full mask with functions like the generic equivalence
test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218442 91177308-0d34-0410-b5e6-96231b3b80d8
lowering.
This completes the basic AVX2 feature support, but there are still some
improvements I'd like to do to really get the last mile of performance
here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218440 91177308-0d34-0410-b5e6-96231b3b80d8
I made a mistake in the previous commit and produced the wrong pattern.
Fix that. Also make one more shuffle pattern byte-based rather than
word-based, and add two more blend patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218439 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles rather than word shuffles.
As you might guess, these were built starting from the word shuffle test
cases and I failed to properly port a bunch of them and left them as
widened word shuffle test cases. We still have a couple of tests that
check our ability to widen shuffles, but now we will test the actual
byte shuffle quite a bit better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218438 91177308-0d34-0410-b5e6-96231b3b80d8
missing test cases for it.
Unsurprisingly, without test cases, there were bugs here. Surprisingly,
this bug wasn't caught at compile time. Yep, there is an X86ISD::BLENDV.
It isn't wired to anything. Oops. I'll fix than next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218434 91177308-0d34-0410-b5e6-96231b3b80d8
lowering.
This also implements the fancy blend lowering for v16i16 using AVX2 and
teaches the X86 backend to print shuffle masks for 256-bit PSHUFB
and PBLENDW instructions. It also makes the mask decoding correct for
PBLENDW instructions. The yaks, they are legion.
Tests are updated accordingly. There are some missing tests for the
VBLENDVB lowering, but I'll add those in a follow-up as this commit has
accumulated enough cruft already.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218430 91177308-0d34-0410-b5e6-96231b3b80d8
If it's safe to clobber the condition flags, we can do a few extra things:
it's then possible to reset the base register writeback using a SUBS, so
we can try to merge even if the base register isn't dead after the merged
instruction.
This is effectively a (heavily bug-fixed) rewrite of r208992.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218386 91177308-0d34-0410-b5e6-96231b3b80d8
pool data being loaded into a vector register.
The comments take the form of:
# ymm0 = [a,b,c,d,...]
# xmm1 = <x,y,z...>
The []s are used for generic sequential data and the <>s are used for
specifically ConstantVector loads. Undef elements are printed as the
letter 'u', integers in decimal, and floating point values as floating
point values. Suggestions on improving the formatting or other aspects
of the display are very welcome.
My primary use case for this is to be able to FileCheck test masks
passed to vector shuffle instructions in-register. It isn't fantastic
for that (no decoding special zeroing semantics or other tricks), but it
at least puts the mask onto an instruction line that could reasonably be
checked. I've updated many of the new vector shuffle lowering tests to
leverage this in their test cases so that we're actually checking the
shuffle masks remain as expected.
Before implementing this, I tried a *bunch* of different approaches.
I looked into teaching the MCInstLower code to scan up the basic block
and find a definition of a register used in a shuffle instruction and
then decode that, but this seems incredibly brittle and complex.
I talked to Hal a lot about the "right" way to do this: attach the raw
shuffle mask to the instruction itself in some form of unencoded
operands, and then use that to emit the comments. I still think that's
the optimal solution here, but it proved to be beyond what I'm up for
here. In particular, it seems likely best done by completing the
plumbing of metadata through these layers and attaching the shuffle mask
in metadata which could have fully automatic dropping when encoding an
actual instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218377 91177308-0d34-0410-b5e6-96231b3b80d8
the native AVX2 instructions.
Note that the test case is really frustrating here because VPERMD
requires the mask to be in the register input and we don't produce
a comment looking through that to the constant pool. I'm going to
attempt to improve this in a subsequent commit, but not sure if I will
succeed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218347 91177308-0d34-0410-b5e6-96231b3b80d8
detection. It was incorrectly handling undef lanes by actually treating
an undef lane in the first 128-bit lane as a *numeric* shuffle value.
Fortunately, this almost always DTRT and disabled detecting repeated
patterns. But not always. =/ This patch introduces a much more
principled approach and fixes the miscompiles I spotted by inspection
previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218346 91177308-0d34-0410-b5e6-96231b3b80d8
This testcase was not testing what it meant: because there were only two checks for
dmb {{ish}} in the second function, it could have missed a bug where one of the three
required dmb {{ish}} became dmb {{ishst}}. As I was fixing it, I also added
CHECK-LABELs to make it a bit less brittle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218341 91177308-0d34-0410-b5e6-96231b3b80d8
shuffles using the AVX2 instructions. This is the first step of cutting
in real AVX2 support.
Note that I have spotted at least one bug in the test cases already, but
I suspect it was already present and just is getting surfaced. Will
investigate next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218338 91177308-0d34-0410-b5e6-96231b3b80d8
add VPBLENDD to the InstPrinter's comment generation so we get nice
comments everywhere.
Now that we have the nice comments, I can see the bug introduced by
a silly typo in the commit that enabled VPBLENDD, and have fixed it. Yay
tests that are easy to inspect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218335 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
AtomicExpand already had logic for expanding wide loads and stores on LL/SC
architectures, and for expanding wide stores on CmpXchg architectures, but
not for wide loads on CmpXchg architectures. This patch fills this hole,
and makes use of this new feature in the X86 backend.
Only one functionnal change: we now lose the SynchScope attribute.
It is regrettable, but I have another patch that I will submit soon that will
solve this for all of AtomicExpand (it seemed better to split it apart as it
is a different concern).
Test Plan: make check-all (lots of tests for this functionality already exist)
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218332 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch makes use of AtomicExpandPass in Power for inserting fences around
atomic as part of an effort to remove fence insertion from SelectionDAGBuilder.
As a big bonus, it lets us use sync 1 (lightweight sync, often used by the mnemonic
lwsync) instead of sync 0 (heavyweight sync) in many cases.
I also added a test, as there was no test for the barriers emitted by the Power
backend for atomic loads and stores.
Test Plan: new test + make check-all
Reviewers: jfb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218331 91177308-0d34-0410-b5e6-96231b3b80d8
VPBLENDD where appropriate even on 128-bit vectors.
According to Agner's tables, this instruction is significantly higher
throughput (can execute on any port) on Haswell chips so we should
aggressively try to form it when available.
Sadly, this loses our delightful shuffle comments. I'll add those back
for VPBLENDD next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218322 91177308-0d34-0410-b5e6-96231b3b80d8
undef in the shuffle mask. This shows up when we're printing comments
during lowering and we still have an IR-level constant hanging around
that models undef.
A nice consequence of this is *much* prettier test cases where the undef
lanes actually show up as undef rather than as a particular set of
values. This also allows us to print shuffle comments in cases that use
undef such as the recently added variable VPERMILPS lowering. Now those
test cases have nice shuffle comments attached with their details.
The shuffle lowering for PSHUFB has been augmented to use undef, and the
shuffle combining has been augmented to comprehend it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218301 91177308-0d34-0410-b5e6-96231b3b80d8
trick that I missed.
VPERMILPS has a non-immediate memory operand mode that allows it to do
asymetric shuffles in the two 128-bit lanes. Use this rather than two
shuffles and a blend.
However, it turns out the variable shuffle path to VPERMILPS (and
VPERMILPD, although that one offers no functional differenc from the
immediate operand other than variability) wasn't even plumbed through
codegen. Do such plumbing so that we can reasonably emit
a variable-masked VPERMILP instruction. Also plumb basic comment parsing
and printing through so that the tests are reasonable.
There are still a few tests which don't show the shuffle pattern. These
are tests with undef lanes. I'll teach the shuffle decoding and printing
to handle undef mask entries in a follow-up. I've looked at the masks
and they seem reasonable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218300 91177308-0d34-0410-b5e6-96231b3b80d8
We manage to generate all of the matching instructions (and a lot more) via
the reciprocal optimization function - even if we completely remove the square
root optimization. With CHECK_NEXT, we assure that we're executing the
expected square root optimization paths and not generating extra insts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218284 91177308-0d34-0410-b5e6-96231b3b80d8
Shift-left immediate with sign-/zero-extensions also works for boolean values.
Update the assert and the test cases to reflect that fact.
This should fix a bug found by Chad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218275 91177308-0d34-0410-b5e6-96231b3b80d8
These are just test cases, no actual code yet. This establishes the
baseline fallback strategy we're starting from on AVX2 and the expected
lowering we use on AVX1.
Also, these test cases are very much generated. I've manually crafted
the specific pattern set that I'm hoping will be useful at exercising
the lowering code, but I've not (and could not) manually verify *all* of
these. I've spot checked and they seem legit to me.
As with the rest of vector shuffling, at a certain point the only really
useful way to check the correctness of this stuff is through fuzz
testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218267 91177308-0d34-0410-b5e6-96231b3b80d8
We generate broadcast instructions on CPUs with AVX2 to load some constant splat vectors.
This patch should preserve all existing behavior with regular optimization levels,
but also use splats whenever possible when optimizing for *size* on any CPU with AVX or AVX2.
The tradeoff is up to 5 extra instruction bytes for the broadcast instruction to save
at least 8 bytes (up to 31 bytes) of constant pool data.
Differential Revision: http://reviews.llvm.org/D5347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218263 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r218254.
The global_atomics.ll test fails with asserts disabled. For some reason,
the compiler fails to produce the atomic no return variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218257 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Update segmented-stacks*.ll tests with x32 target case and make
corresponding changes to make them pass.
Test Plan: tests updated with x32 target
Reviewers: nadav, rafael, dschuff
Subscribers: llvm-commits, zinovy.nis
Differential Revision: http://reviews.llvm.org/D5245
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218247 91177308-0d34-0410-b5e6-96231b3b80d8
The PSHUFB mask decode routine used to assert if the mask index was out of
range (<0 or greater than the size of the vector). The problem is, we can
legitimately have a PSHUFB with a large index using intrinsics. The
instruction only uses the least significant 4 bits. This change removes the
assert and masks the index to match the instruction behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218242 91177308-0d34-0410-b5e6-96231b3b80d8
Increasingly I don't want to mix the integer and floating point tests,
especially with AVX where they are handled quite differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218233 91177308-0d34-0410-b5e6-96231b3b80d8
a more sane approach to AVX2 support.
Fundamentally, there is no useful way to lower integer vectors in AVX.
None. We always end up with a VINSERTF128 in the end, so we might as
well eagerly switch to the floating point domain and do everything
there. This cleans up lots of weird and unlikely to be correct
differences between integer and floating point shuffles when we only
have AVX1.
The other nice consequence is that by doing things this way we will make
it much easier to write the integer lowering routines as we won't need
to duplicate the logic to check for AVX vs. AVX2 in each one -- if we
actually try to lower a 256-bit vector as an integer vector, we have
AVX2 and can rely on it. I think this will make the code much simpler
and more comprehensible.
Currently, I've disabled *all* support for AVX2 so that we always fall
back to AVX. This keeps everything working rather than asserting. That
will go away with the subsequent series of patches that provide
a baseline AVX2 implementation.
Please note, I'm going to implement AVX2 *without access to hardware*.
That means I cannot correctness test this path. I will be relying on
those with access to AVX2 hardware to do correctness testing and fix
bugs here, but as a courtesy I'm trying to sketch out the framework for
the new-style vector shuffle lowering in the context of the AVX2 ISA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218228 91177308-0d34-0410-b5e6-96231b3b80d8
input v8f32 shuffles which are not 128-bit lane crossing but have
different shuffle patterns in the low and high lanes. This removes most
of the extract/insert traffic that was unnecessary and is particularly
good at lowering cases where only one of the two lanes is shuffled at
all.
I've also added a collection of test cases with undef lanes because this
lowering is somewhat more sensitive to undef lanes than others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218226 91177308-0d34-0410-b5e6-96231b3b80d8
in the high and low 128-bit lanes of a v8f32 vector.
No functionality change yet, but wanted to set up the baseline for my
next patch which will make these quite a bit better. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218224 91177308-0d34-0410-b5e6-96231b3b80d8
lowering when it can use a symmetric SHUFPS across both 128-bit lanes.
This required making the SHUFPS lowering tolerant of other vector types,
and adjusting our canonicalization to canonicalize harder.
This is the last of the clever uses of symmetry I've thought of for
v8f32. The rest of the tricks I'm aware of here are to work around
assymetry in the mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218216 91177308-0d34-0410-b5e6-96231b3b80d8
of a single element into a zero vector for v4f64 and v4i64 in AVX.
Ironically, there is less to see here because xor+blend is so crazy fast
that we can't really beat that to zero the high 128-bit lane.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218214 91177308-0d34-0410-b5e6-96231b3b80d8
UNPCKHPS with AVX vectors by recognizing those patterns when they are
repeated for both 128-bit lanes.
With this, we now generate the exact same (really nice) code for
Quentin's avx_test_case.ll which was the most significant regression
reported for the new shuffle lowering. In fact, I'm out of specific test
cases for AVX lowering, the rest were AVX2 I think. However, there are
a bunch of pretty obvious remaining things to improve with AVX...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218213 91177308-0d34-0410-b5e6-96231b3b80d8
important bits of cleverness: to detect and lower repeated shuffle
patterns between the two 128-bit lanes with a single instruction.
This patch just teaches it how to lower single-input shuffles that fit
this model using VPERMILPS. =] There is more that needs to happen here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218211 91177308-0d34-0410-b5e6-96231b3b80d8
generating the test cases to format things more consistently and
actually catch all the operand sequences that should be elided in favor
of the asm comments. No actual changes here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218210 91177308-0d34-0410-b5e6-96231b3b80d8
