with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68576 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use the same value# to represent unknown values being merged into sub-registers.
2. When coalescer commute an instruction and the destination is a physical register, update its sub-registers by merging in the extended ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66610 91177308-0d34-0410-b5e6-96231b3b80d8
Live interval reconstruction needs to account for this, and scour its maps to
prevent dangling references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63558 91177308-0d34-0410-b5e6-96231b3b80d8
RA problem by expanding the live interval of an
earlyclobber def back one slot. Remove
overlap-earlyclobber throughout. Remove
earlyclobber bits and their handling from
live internals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56539 91177308-0d34-0410-b5e6-96231b3b80d8
register defs and uses after each successful coalescing.
- Also removed a number of hacks and fixed some subtle kill information bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47167 91177308-0d34-0410-b5e6-96231b3b80d8
the source register will be coalesced to the super register of the LHS. Properly
merge in the live ranges of the resulting coalesced interval that were part of
the original source interval to the live interval of the super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42961 91177308-0d34-0410-b5e6-96231b3b80d8
(almost) a register copy. However, it always coalesced to the register of the
RHS (the super-register). All uses of the result of a EXTRACT_SUBREG are sub-
register uses which adds subtle complications to load folding, spiller rewrite,
etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42899 91177308-0d34-0410-b5e6-96231b3b80d8
Changes related modules so VNInfo's are not copied. This decrease
copy coalescing time by 45% and overall compilation time by 10% on siod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41579 91177308-0d34-0410-b5e6-96231b3b80d8
1. Eliminate the costly live interval "swapping".
2. Change ValueNumberInfo container from SmallVector to std::vector. The former
performs slowly when the vector size is very large.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41536 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix some minor bugs related to special markers on val# def. ~0U means
undefined, ~1U means dead val#.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40916 91177308-0d34-0410-b5e6-96231b3b80d8
kill instruction #, and source register number (iff the value# is defined by a
copy).
- Now def instruction # is set for every value#, not just for copy defined ones.
- Update some outdated code related inactive live ranges.
- Kill info not yet set. That's next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40913 91177308-0d34-0410-b5e6-96231b3b80d8
rework the hacks that had us passing OStream in. We pass in std::ostream*
instead, check for null, and then dispatch to the correct print() method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32636 91177308-0d34-0410-b5e6-96231b3b80d8
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31380 91177308-0d34-0410-b5e6-96231b3b80d8
number of copies, potentially defining live ranges that appear to have
differing value numbers that become identical when coallsced. Among other
things, this fixes CodeGen/X86/shift-coalesce.ll and PR687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29968 91177308-0d34-0410-b5e6-96231b3b80d8
paves the way for future changes, increases coallescing opportunities (in
theory, not witnessed in practice), and eliminates the really expensive
LiveIntervals::overlapsAliases method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29890 91177308-0d34-0410-b5e6-96231b3b80d8
instructions which define each value#) to simplify and improve the coallescer.
In particular, this patch:
1. Implements iterative coallescing.
2. Reverts an unsafe hack from handlePhysRegDef, superceeding it with a
better solution.
3. Implements PR865, "coallescing" away the second copy in code like:
A = B
...
B = A
This also includes changes to symbolically print registers in intervals
when possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29862 91177308-0d34-0410-b5e6-96231b3b80d8
(an unused method).
Fix the merger so that it can merge ranges like this [10:12)[16:40) with
[12:38) into [10:40) instead of bogus ranges. This sort of input will be
possible for the merger coming shortly
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23865 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a *bug* in the extendIntervalEndTo method. In particular, if adding
[2:10) to an interval containing [0:2),[10:30), we produced [0:10),[10,30).
Which is not the most smart thing to do. Now produce [0:30).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23841 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
aggressively coallesce live ranges even if they overlap. Consider this LLVM
code for example:
int %test(int %X) {
%Y = mul int %X, 1 ;; Codegens to Y = X
%Z = add int %X, %Y
ret int %Z
}
The mul is just there to get a copy into the code stream. This produces
this machine code:
(0x869e5a8, LLVM BB @0x869b9a0):
%reg1024 = mov <fi#-2>, 1, %NOREG, 0 ;; "X"
%reg1025 = mov %reg1024 ;; "Y" (subsumed by X)
%reg1026 = add %reg1024, %reg1025
%EAX = mov %reg1026
ret
Note that the life times of reg1024 and reg1025 overlap, even though they
contain the same value. This results in this machine code:
test:
mov %EAX, DWORD PTR [%ESP + 4]
mov %ECX, %EAX
add %EAX, %ECX
ret
Another, worse case involves loops and PHI nodes. Consider this trivial loop:
testcase:
int %test2(int %X) {
entry:
br label %Loop
Loop:
%Y = phi int [%X, %entry], [%Z, %Loop]
%Z = add int %Y, 1
%cond = seteq int %Z, 100
br bool %cond, label %Out, label %Loop
Out:
ret int %Z
}
Because of interactions between the PHI elimination pass and the register
allocator, this got compiled to this code:
test2:
mov %ECX, DWORD PTR [%ESP + 4]
.LBBtest2_1:
*** mov %EAX, %ECX
inc %EAX
cmp %EAX, 100
*** mov %ECX, %EAX
jne .LBBtest2_1
ret
Or on powerpc, this code:
_test2:
mflr r0
stw r0, 8(r1)
stwu r1, -60(r1)
.LBB_test2_1:
addi r2, r3, 1
cmpwi cr0, r2, 100
*** or r3, r2, r2
bne cr0, .LBB_test2_1
*** or r3, r2, r2
lwz r0, 68(r1)
mtlr r0
addi r1, r1, 60
blr 0
With this improvement in place, we now generate this code for these two
testcases, which is what we want:
test:
mov %EAX, DWORD PTR [%ESP + 4]
add %EAX, %EAX
ret
test2:
mov %EAX, DWORD PTR [%ESP + 4]
.LBBtest2_1:
inc %EAX
cmp %EAX, 100
jne .LBBtest2_1 # Loop
ret
Or on PPC:
_test2:
mflr r0
stw r0, 8(r1)
stwu r1, -60(r1)
.LBB_test2_1:
addi r3, r3, 1
cmpwi cr0, r3, 100
bne cr0, .LBB_test2_1
lwz r0, 68(r1)
mtlr r0
addi r1, r1, 60
blr 0
Static numbers for spill code loads/stores/reg-reg copies (smaller is better):
em3d: before: 47/25/26 after: 44/22/24
164.gzip: before: 433/245/310 after: 403/231/278
175.vpr: before: 3721/2189/1581 after: 4144/2081/1423
176.gcc: before: 26195/8866/9235 after: 25942/8082/8275
186.crafty: before: 4295/2587/3079 after: 4119/2519/2916
252.eon: before: 12754/7585/5803 after: 12508/7425/5643
256.bzip2: before: 463/226/315 after: 482:241/309
Runtime perf number samples on X86:
gzip: before: 41.09 after: 39.86
bzip2: runtime: before: 56.71s after: 57.07s
gcc: before: 6.16 after: 6.12
eon: before: 2.03s after: 2.00s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15194 91177308-0d34-0410-b5e6-96231b3b80d8
LiveInterval>. This saves some space and removes the pointer
indirection caused by following the pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15167 91177308-0d34-0410-b5e6-96231b3b80d8
us back to taking about 10.5s on gcc, instead of taking 15.6s! The net result
is that my big patches have hand no significant effect on compile time or code
quality. heh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15156 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix comment typeo
* add dump() methods
* add a few new methods like getLiveRangeContaining, removeRange & joinable
(which is currently the same as overlaps)
* Remove the unused operator==
Bigger change:
* In LiveInterval, instead of using a boolean isDefinedOnce to keep track of
if there are > 1 definitions in a particular interval, keep a counter,
NumValues to keep track of exactly how many there are.
* In LiveRange, add a new ValId element to indicate which of the numbered
values each LiveRange belongs to. We now no longer merge LiveRanges if
they are of differing value ID's even if they are neighbors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15152 91177308-0d34-0410-b5e6-96231b3b80d8
want to insert a new range into the middle of the vector, then delete ranges
one at a time next to the inserted one as they are merged.
Instead, if the inserted interval overlaps, just start merging. The only time
we insert into the middle of the vector is when we don't overlap at all. Also
delete blocks of live ranges if we overlap with many of them.
This patch speeds up joining by .7 seconds on a large testcase, but more
importantly gets all of the range adding code into addRangeFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15141 91177308-0d34-0410-b5e6-96231b3b80d8
will soon be renamed) into their own file. The new file should not emit
DEBUG output or have other side effects. The LiveInterval class also now
doesn't know whether its working on registers or some other thing.
In the future we will want to use the LiveInterval class and friends to do
stack packing. In addition to a code simplification, this will allow us to
do it more easily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15134 91177308-0d34-0410-b5e6-96231b3b80d8
