Summary:
When optimization remarks are enabled via the driver flag -Rpass, we
should allow the FE diagnostic handler to check if the given pass name
needs a diagnostic.
We were unconditionally checking the pattern defined in opt's
-pass-remarks flag. This was causing the FE to not emit any diagnostics.
Reviewers: qcolombet
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3362
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206400 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206398 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
These ones used completely different sets of intrinsics, so the only way to do
it is create a separate ARM64 copy and change them all.
Other than that, CodeGen was straightforward, no deficiencies detected here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206392 91177308-0d34-0410-b5e6-96231b3b80d8
This should fix the ninja-x64-msvc-RA-centos6 builder.
I suspect the check in MipsSubtarget.cpp is incorrect and is really trying to
check for a bare-metal target rather and anything other than linux. I'll
investigate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206385 91177308-0d34-0410-b5e6-96231b3b80d8
Now that Linux is trying to reparse all inline asm it chokes on the different
comment character in this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206382 91177308-0d34-0410-b5e6-96231b3b80d8
The most important part here is that we should actuall emit the stubs we refer
to in the exception table, but as a side issue this uses more sensible & GCC
compatible representations for some of the bits of information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206380 91177308-0d34-0410-b5e6-96231b3b80d8
If we know that a particular 64-bit constant has all high bits zero, then we
can rely on the fact that 32-bit ARM64 instructions automatically zero out the
high bits of an x-register. This gives the expansion logic less constraints to
satisfy and so sometimes allows it to pick better sequences.
Came up while porting test/CodeGen/AArch64/movw-consts.ll: this will allow a
32-bit MOVN to be used in @test8 soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206379 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't work. I'm still cleaning up all the places where I blindly
followed this pattern. There are more to come in this code too.
As a benefit, this lets the default copy and move operations Just Work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206375 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I had difficulty finding tests for the N32 and N64 ABI so I've added a
collection of calling convention tests based on the document MIPS ABIs
Described (MD00305), the MIPSpro N32 Handbook, and the SYSV ABI. Where the
documents/implementations disagree, I've used GCC to resolve the conflict.
A few interesting details:
* For N32, LLVM uses 64-bit pointers when saving $ra despite pointers being
32-bit. I've yet to find a supporting statement in the ABI documentation but
the current behaviour matches GCC.
* For O32, the non-variable portion of a varargs argument list is also subject
to the rule that floating-point is passed via GPR's (on N32/N64 only the
variable portion is subject to this rule). This agrees with GCC's behaviour
and the SYSV ABI but contradicts part of the MIPSpro N32 Handbook which talks about O32's behaviour.
* The N32 implementation has the wrong callee-saved register list.
(I already have a fix for this but will commit it as a follow-up).
I've left RUN-TODO lines in for O32 on MIPS64. I don't plan to support this case
for now but we should revisit it.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206370 91177308-0d34-0410-b5e6-96231b3b80d8
The second half of a split i128 was ending up in x7, which is not a good thing.
This is another part of PR19432.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206366 91177308-0d34-0410-b5e6-96231b3b80d8
This particular DAG combine is designed to kick in when both ConstantFPs will
end up being loaded via a litpool, however those nodes have a semi-legal
status, dictated by isFPImmLegal so in some cases there wouldn't have been a
litpool in the first place. Don't try to be clever in those circumstances.
Picked up while merging some AArch64 tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206365 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust the tests to validate the number of auxiliary entries used to store the
filename.
Thanks to majnemer's sharp eye for catching the missing - 1 in the round up
calculation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206359 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for emitting .file records. This is mostly a quality of
implementation change (more complete support for COFF file emission) that was
noticed while working on COFF file emission for Windows on ARM.
A .file record is emitted as a symbol with storage class FILE (103) and the name
".file". A series of auxiliary format 4 records follow which contain the file
name. The filename is stored as an ANSI string and is padded with NULL if the
length is not a multiple of COFF::SymbolSize (18).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206355 91177308-0d34-0410-b5e6-96231b3b80d8
Setting vector types to expand will result in scalarization on pre SI hw,
as those gpus don't have vector shifts either.
Expand also i32 vectors, this helps llvm make the correct decision
about scalarizing the vector ops.
v2: move setOperation() calls to R600ISelLowering.cpp.
cleanup the SI code to make it obvious that this patch does is nop for SI
Patch by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206348 91177308-0d34-0410-b5e6-96231b3b80d8
Range'ify a bunch of loops, mainly. As a result, we have a variety
of objects via reference rather than by pointer, so propogate that
through the various helper functions where it makes sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206337 91177308-0d34-0410-b5e6-96231b3b80d8
Print in decimal for inline immediates, and hex otherwise. Use hex
always for offsets in addressing offsets.
This approximately matches what the shader compiler does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206335 91177308-0d34-0410-b5e6-96231b3b80d8
a default argument. The allocator interface we're modeling doesn't
distinguish between array and non-array allocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206327 91177308-0d34-0410-b5e6-96231b3b80d8
because there is another (size_t, size_t) overload of Allocator, and the
only distinguishing factor is that one is a tempalte and the other
isn't. There was only one usage of this and that one was easily
converted to carry the alignment constraint in the type itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206325 91177308-0d34-0410-b5e6-96231b3b80d8
handles Intrinsic::trap if TargetOptions::TrapFuncName is set.
This fixes a bug in which the trap function was not taken into consideration
when a program was compiled without optimization (at -O0).
<rdar://problem/16291933>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206323 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to efficiently lower logical and
arithmetic packed shifts on both SSE and AVX/AVX2 machines.
When possible, instead of scalarizing a vector shift, the backend should try
to expand the shift into a sequence of two packed shifts by immedate count
followed by a MOVSS/MOVSD.
Example
(v4i32 (srl A, (build_vector < X, Y, Y, Y>)))
Can be rewritten as:
(v4i32 (MOVSS (srl A, <Y,Y,Y,Y>), (srl A, <X,X,X,X>)))
[with X and Y ConstantInt]
The advantage is that the two new shifts from the example would be lowered into
X86ISD::VSRLI nodes. This is always cheaper than scalarizing the vector into
four scalar shifts plus four pairs of vector insert/extract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206316 91177308-0d34-0410-b5e6-96231b3b80d8
