Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219931 91177308-0d34-0410-b5e6-96231b3b80d8
The code committed in r219832 asserted when it attempted to shrink a switch
statement whose type was larger than 64-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219902 91177308-0d34-0410-b5e6-96231b3b80d8
Make tail recursion elimination a bit more aggressive. This allows us to get
tail recursion on functions that are just branches to a different function. The
fact that the function takes a byval argument does not restrict it from being
optimised into just a tail call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219899 91177308-0d34-0410-b5e6-96231b3b80d8
Philip Reames and I had a long conversation about this, mostly because it is
not obvious why the current logic is correct. Hopefully, these comments will
prevent such confusion in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219882 91177308-0d34-0410-b5e6-96231b3b80d8
For pointer-typed function arguments, enhanced alignment can be asserted using
the 'align' attribute. When inlining, if this enhanced alignment information is
not otherwise available, preserve it using @llvm.assume-based alignment
assumptions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219876 91177308-0d34-0410-b5e6-96231b3b80d8
Clang CodeGen had a utility function for creating pointer alignment assumptions
using the @llvm.assume intrinsic. This functionality will also be needed by the
inliner (to preserve function-argument alignment attributes when inlining), so
this moves the utility function into IRBuilder where it can be used both by
Clang CodeGen and also other LLVM-level code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219875 91177308-0d34-0410-b5e6-96231b3b80d8
In AVX512f we support 64x2 and 32x8 inserts via matching them to 32x4 and 64x4
respectively. These are matched by "Alt" Pat<>'s (Alt stands for alternative
VTs).
Since DQ has native support for these intructions, I peeled off the non-"Alt"
part of the baseclass into vinsert_for_size_no_alt. The DQ instructions are
derived from this multiclass. The "Alt" Pat<>'s are disabled with DQ.
Fixes <rdar://problem/18426089>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219874 91177308-0d34-0410-b5e6-96231b3b80d8
The new attributes are NumElts and the CD8TupleForm. This prepares the code
to enable x8 and x2 inserts.
NFC, no change in X86.td.expanded except for the new attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219871 91177308-0d34-0410-b5e6-96231b3b80d8
It's the W bit that selects between 32 or 64 elt type and not the opcode. The
opcode selects between the width of the insert (128 or 256).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219870 91177308-0d34-0410-b5e6-96231b3b80d8
This CL introduces MachOObjectFile::getUuid(). This function returns an ArrayRef to the object file's UUID, or an empty ArrayRef if the object file doesn't contain an LC_UUID load command.
The new function is gonna be used by llvm-symbolizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219866 91177308-0d34-0410-b5e6-96231b3b80d8
The SelectDS1Addr1Offset complex pattern always tries to store constant
lds pointers in the offset operand and store a zero value in the addr operand.
Since the addr operand does not accept immediates, the zero value
needs to first be copied to a register.
This newly created zero value will not go through normal instruction
selection, so we need to manually insert a V_MOV_B32_e32 in the complex
pattern.
This bug was hidden by the fact that if there was another zero value
in the DAG that had not been selected yet, then the CSE done by the DAG
would use the unselected node for the addr operand rather than the one
that was just created. This would lead to the zero value being selected
and the DAG automatically inserting a V_MOV_B32_e32 instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219848 91177308-0d34-0410-b5e6-96231b3b80d8
This original fix for the build break was correct. LLVM_ATTRIBUTE_USED
removes the warning message because it keeps the function in the object
file. LLVM_ATTRIBUTE_UNUSED indicates that it may or may not be used
depending on build settings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219846 91177308-0d34-0410-b5e6-96231b3b80d8
Store `User::NumOperands` (and `MDNode::NumOperands`) in `Value`.
On 64-bit host architectures, this reduces `sizeof(User)` and all
subclasses by 8, and has no effect on `sizeof(Value)` (or, incidentally,
on `sizeof(MDNode)`).
On 32-bit host architectures, this increases `sizeof(Value)` by 4.
However, it has no effect on `sizeof(User)` and `sizeof(MDNode)`, so the
only concrete subclasses of `Value` that actually see the increase are
`BasicBlock`, `Argument`, `InlineAsm`, and `MDString`. Moreover, I'll
be shocked and confused if this causes a tangible memory regression.
This has no functionality change (other than memory footprint).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219845 91177308-0d34-0410-b5e6-96231b3b80d8
A follow-up commit will modify the memory-layout of `Value`, `User`, and
`MDNode`. First fix the comments to be doxygen-friendly (and to follow
the coding standards).
- Use "\brief" instead of "repeatedName -".
- Add a brief intro where it was missing.
- Remove duplicated comments from source files (and a couple of
noisy/trivial comments altogether).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219844 91177308-0d34-0410-b5e6-96231b3b80d8
If x is known to have the range [a, b) in a loop predicated by (icmp
ne x, a), its range can be sharpened to [a + 1, b). Get
ScalarEvolution and hence IndVars to exploit this fact.
This change triggers an optimization to widen-loop-comp.ll, so it had
to be edited to get it to pass.
phabricator: http://reviews.llvm.org/D5639
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219834 91177308-0d34-0410-b5e6-96231b3b80d8
Truncate the operands of a switch instruction to a narrower type if the upper
bits are known to be all ones or zeros.
rdar://problem/17720004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219832 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly a copy of the existing FastISel GEP code, but we have to
duplicate it for AArch64, because otherwise we would bail out even for simple
cases. This is because the standard fastEmit functions don't cover MUL at all
and ADD is lowered very inefficientily.
The original commit had a bug in the add emit logic, which has been fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219831 91177308-0d34-0410-b5e6-96231b3b80d8
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219829 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the MCInstPrinter to the LLVMHexagonDesc library and removes
the dependency LLVMHexagonAsmPrinter had on LLVMHexagonDesc. This is
a prerequisite needed by the disassembler.
Phabricator Revision: http://reviews.llvm.org/D5734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219826 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use const with autos.
2. Don't bother with explicit const in cast ops because they do it automagically.
Thanks, David B. / Aaron B. / Reid K.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219817 91177308-0d34-0410-b5e6-96231b3b80d8
The SLP vectorizer should not vectorize ephemeral values. These are used to
express information to the optimizer, and vectorizing them does not lead to
faster code (because the ephemeral values are dropped prior to code generation,
vectorized or not), and obscures the information the instructions are
attempting to communicate (the logic that interprets the arguments to
@llvm.assume generically does not understand vectorized conditions).
Also, uses by ephemeral values are free (because they, and the necessary
extractelement instructions, will be dropped prior to code generation).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219816 91177308-0d34-0410-b5e6-96231b3b80d8
We need to make sure that we visit all operands of an instruction before moving
deeper in the operand graph. We had been pushing operands onto the back of the work
set, and popping them off the back as well, meaning that we might visit an
instruction before visiting all of its uses that sit in between it and the call
to @llvm.assume.
To provide an explicit example, given the following:
%q0 = extractelement <4 x float> %rd, i32 0
%q1 = extractelement <4 x float> %rd, i32 1
%q2 = extractelement <4 x float> %rd, i32 2
%q3 = extractelement <4 x float> %rd, i32 3
%q4 = fadd float %q0, %q1
%q5 = fadd float %q2, %q3
%q6 = fadd float %q4, %q5
%qi = fcmp olt float %q6, %q5
call void @llvm.assume(i1 %qi)
%q5 is used by both %qi and %q6. When we visit %qi, it will be marked as
ephemeral, and we'll queue %q6 and %q5. %q6 will be marked as ephemeral and
we'll queue %q4 and %q5. Under the old system, we'd then visit %q4, which
would become ephemeral, %q1 and then %q0, which would become ephemeral as
well, and now we have a problem. We'd visit %rd, but it would not be marked as
ephemeral because we've not yet visited %q2 and %q3 (because we've not yet
visited %q5).
This will be covered by a test case in a follow-up commit that enables
ephemeral-value awareness in the SLP vectorizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219815 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently an error is thrown if bundle alignment mode is set more than once
per module (either via the API or the .bundle_align_mode directive). This
change allows setting it multiple times as long as the alignment doesn't
change.
Also nested bundle_lock groups are currently not allowed. This change allows
them, with the effect that the group stays open until all nests are exited,
and if any of the bundle_lock directives has the align_to_end flag, the
group becomes align_to_end.
These changes make the bundle aligment simpler to use in the compiler, and
also better match the corresponding support in GNU as.
Reviewers: jvoung, eliben
Differential Revision: http://reviews.llvm.org/D5801
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219811 91177308-0d34-0410-b5e6-96231b3b80d8
A number of comment cleanups:
- Remove duplicated function and class names from comments.
- Remove duplicated comments from source file (some of which were
out-of-sync).
- Move any unduplicated comments from source file to header.
- Remove some noisy comments entirely (e.g., a comment for
`DIDescriptor::print()` saying "print descriptor" just gets in the
way of reading the code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219801 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a strange round-trip through named metadata to assign preserved
local variables to their subprograms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@219798 91177308-0d34-0410-b5e6-96231b3b80d8
