1. The "JITState" object creates a PassManager with the ModuleProvider that the
jit is created with. If the ModuleProvider is removed and deleted, the
PassManager is invalid.
2. The Global maps in the JIT were not invalidated with a ModuleProvider was
removed. This could lead to a case where the Module would be freed, and a
new Module with Globals at the same addresses could return invalid results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51384 91177308-0d34-0410-b5e6-96231b3b80d8
are represented as "weak", but there are subtle differences
in some cases on Darwin, so we need both. The intent
is that "common" will behave identically to "weak" unless
somebody changes their target to do something else.
No functional change as yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51118 91177308-0d34-0410-b5e6-96231b3b80d8
endianness of the target not of the host. Done by the
simple expedient of reversing bytes for primitive types
if the host and target endianness don't match. This is
correct for integer and pointer types. I don't know if
it is correct for floating point types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45039 91177308-0d34-0410-b5e6-96231b3b80d8
put it in a new header System/Host.h instead.
Instead of getting the endianness from configure,
calculate it directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44959 91177308-0d34-0410-b5e6-96231b3b80d8
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44796 91177308-0d34-0410-b5e6-96231b3b80d8
in this call:
Result.IntVal = APInt(80, 2, x);
What is x?
uint16_t x[8];
I deduce that the APInt constructor being used is this one:
APInt(uint32_t numBits, uint64_t val, bool isSigned = false);
rather than this one:
APInt(uint32_t numBits, uint32_t numWords, const uint64_t bigVal[]);
That doesn't seem right! This fix compiles but is otherwise completely
untested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44400 91177308-0d34-0410-b5e6-96231b3b80d8
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43620 91177308-0d34-0410-b5e6-96231b3b80d8
input. APInt unfortunately zero-extends signed integers, so Dale
modified the function to expect zero-extended input. Make this
assumption explicit in the function name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42732 91177308-0d34-0410-b5e6-96231b3b80d8
use APFloat for int-to-float/double; use
round-to-nearest for these (implementation-defined,
seems to match gcc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42484 91177308-0d34-0410-b5e6-96231b3b80d8
bit width instead of number of words allocated, which
makes it actually work for int->APF conversions.
Adjust callers. Add const to one of the APInt constructors
to prevent surprising match when called with const
argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42210 91177308-0d34-0410-b5e6-96231b3b80d8
Use APFloat in UpgradeParser and AsmParser.
Change all references to ConstantFP to use the
APFloat interface rather than double. Remove
the ConstantFP double interfaces.
Use APFloat functions for constant folding arithmetic
and comparisons.
(There are still way too many places APFloat is
just a wrapper around host float/double, but we're
getting there.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41747 91177308-0d34-0410-b5e6-96231b3b80d8
to make a copy of the GenericValue.
2. Fix a copy & paste bug in StoreValueToMemory where 64-bit values were
truncated to 32
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34958 91177308-0d34-0410-b5e6-96231b3b80d8
field, of type APInt, instead of multiple integer fields. Also, get rid of
the special endianness code in StoreValueToMemory and LoadValueToMemory.
ExecutionEngine is always used to execute on the host platform so this is
now unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34946 91177308-0d34-0410-b5e6-96231b3b80d8
While preparing http://llvm.org/PR1198 I noticed several asserts
protecting unprepared code from i128 types that weren't actually failing
when they should because they were written as assert("foo") instead of
something like assert(0 && "foo"). This patch fixes all the cases that a
quick grep found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34267 91177308-0d34-0410-b5e6-96231b3b80d8
This is the final patch for this PR. It implements some minor cleanup
in the use of IntegerType, to wit:
1. Type::getIntegerTypeMask -> IntegerType::getBitMask
2. Type::Int*Ty changed to IntegerType* from Type*
3. ConstantInt::getType() returns IntegerType* now, not Type*
This also fixes PR1120.
Patch by Sheng Zhou.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33370 91177308-0d34-0410-b5e6-96231b3b80d8
not to overflow 64-bits and end up with a 0 mask. This caused i64 values to
always be stored as 0 with lots of consequential damage to nightly test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33335 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the arbitrary bit-width integer feature. The feature allows
integers of any bitwidth (up to 64) to be defined instead of just 1, 8,
16, 32, and 64 bit integers.
This change does several things:
1. Introduces a new Derived Type, IntegerType, to represent the number of
bits in an integer. The Type classes SubclassData field is used to
store the number of bits. This allows 2^23 bits in an integer type.
2. Removes the five integer Type::TypeID values for the 1, 8, 16, 32 and
64-bit integers. These are replaced with just IntegerType which is not
a primitive any more.
3. Adjust the rest of LLVM to account for this change.
Note that while this incremental change lays the foundation for arbitrary
bit-width integers, LLVM has not yet been converted to actually deal with
them in any significant way. Most optimization passes, for example, will
still only deal with the byte-width integer types. Future increments
will rectify this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33113 91177308-0d34-0410-b5e6-96231b3b80d8
recommended that getBoolValue be replaced with getZExtValue and that
get(bool) be replaced by get(const Type*, uint64_t). This implements
those changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33110 91177308-0d34-0410-b5e6-96231b3b80d8
Merge ConstantIntegral and ConstantBool into ConstantInt.
Remove ConstantIntegral and ConstantBool from LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33073 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
DLL* linkages got full (I hope) codegeneration support in C & both x86
assembler backends.
External weak linkage added for future use, we don't provide any
codegeneration, etc. support for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30374 91177308-0d34-0410-b5e6-96231b3b80d8
x86 and ppc for 100% dense switch statements when relocations are non-PIC.
This support will be extended and enhanced in the coming days to support
PIC, and less dense forms of jump tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27947 91177308-0d34-0410-b5e6-96231b3b80d8
This allows Prolangs-C++/city and probably a bunch of other stuff to work
well with the new front-end
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27941 91177308-0d34-0410-b5e6-96231b3b80d8
interpretation has begun. The JIT already handles this situation correctly, and
the interpreter can already handle new functions being added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26030 91177308-0d34-0410-b5e6-96231b3b80d8
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22404 91177308-0d34-0410-b5e6-96231b3b80d8
using Function::arg_{iterator|begin|end}. Likewise Module::g* -> Module::global_*.
This patch is contributed by Gabor Greif, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20597 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
turn a memory address back into the LLVM global object that starts at that
address. Note that this won't cause any additional datastructures to be built
for clients of the EE that don't need this information.
Also modified some code to not access the GlobalAddress map directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10674 91177308-0d34-0410-b5e6-96231b3b80d8
ModuleProvider, which has bad consequences in lli::callAsMain() which tries to
access that same Module*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9205 91177308-0d34-0410-b5e6-96231b3b80d8
Switch Interpreter and JIT's "run" methods to take a Function and a vector of
GenericValues.
Move (almost all of) the stuff that constructs a canonical call to main()
into lli (new methods "callAsMain", "makeStringVector").
Nuke getCurrentExecutablePath(), enableTracing(), getCurrentFunction(),
isStopped(), and many dead decls from interpreter.
Add linux strdup() support to interpreter.
Make interpreter's atexit handler runner and JIT's runAtExitHandlers() look
more alike, in preparation for refactoring.
atexit() is spelled "atexit", not "at_exit".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8366 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of support for DebugMode (make it always off).
Mung some comments.
Get rid of interpreter's PROFILE_STRUCTURE_FIELDS and PerformExitStuff
which have been disabled forever.
Get rid of -abort-on-exception (make it always on).
Get rid of user interaction stuff (debug mode innards).
Simplify Interpreter's callMainFunction().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8344 91177308-0d34-0410-b5e6-96231b3b80d8
static method here.
Remove some extra blank lines.
ExecutionEngine.h: Add its prototype.
lli.cpp: Call it.
Make creation method for each type of EE into a static method of its
own subclass.
Interpreter/Interpreter.cpp: ExecutionEngine::createInterpreter -->
Interpreter::create
Interpreter/Interpreter.h: Likewise.
JIT/JIT.cpp: ExecutionEngine::createJIT --> VM::create
JIT/VM.h: Likewise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8343 91177308-0d34-0410-b5e6-96231b3b80d8
size is. This ensures that if the module has no specified pointer size that
things will work correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8136 91177308-0d34-0410-b5e6-96231b3b80d8
to pass to dlsym() -- Linux/x86 wants 0 while Sparc/Solaris wants RTLD_SELF,
which is not zero. Thanks to Chris for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7204 91177308-0d34-0410-b5e6-96231b3b80d8
