v8i8 -> v8i32 on AVX machines. The codegen often scalarizes ANY_EXTEND nodes.
The DAGCombiner has two optimizations that can mitigate the problem. First,
if all of the operands of a BUILD_VECTOR node are extracted from an ZEXT/ANYEXT
nodes, then it is possible to create a new simplified BUILD_VECTOR which uses
UNDEFS/ZERO values to eliminate the scalar ZEXT/ANYEXT nodes.
Second, another dag combine optimization lowers BUILD_VECTOR into a shuffle
vector instruction.
In the case of zext v8i8->v8i32 on AVX, a value in an XMM register is to be
shuffled into a wide YMM register.
This patch modifes the second optimization and allows the creation of
shuffle vectors even when the newly generated vector and the original vector
from which we extract the values are of different types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150340 91177308-0d34-0410-b5e6-96231b3b80d8
In this patch we optimize this pattern and convert the sequence into extract op of a narrow type.
This allows the BUILD_VECTOR dag optimizations to construct efficient shuffle operations in many cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149692 91177308-0d34-0410-b5e6-96231b3b80d8
overly conservative. It was concerned about cases where it would prohibit
folding simple [r, c] addressing modes. e.g.
ldr r0, [r2]
ldr r1, [r2, #4]
=>
ldr r0, [r2], #4
ldr r1, [r2]
Change the logic to look for such cases which allows it to form indexed memory
ops more aggressively.
rdar://10674430
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148086 91177308-0d34-0410-b5e6-96231b3b80d8
detect a pattern which can be implemented with a small 'shl' embedded in
the addressing mode scale. This happens in real code as follows:
unsigned x = my_accelerator_table[input >> 11];
Here we have some lookup table that we look into using the high bits of
'input'. Each entity in the table is 4-bytes, which means this
implicitly gets turned into (once lowered out of a GEP):
*(unsigned*)((char*)my_accelerator_table + ((input >> 11) << 2));
The shift right followed by a shift left is canonicalized to a smaller
shift right and masking off the low bits. That hides the shift right
which x86 has an addressing mode designed to support. We now detect
masks of this form, and produce the longer shift right followed by the
proper addressing mode. In addition to saving a (rather large)
instruction, this also reduces stalls in Intel chips on benchmarks I've
measured.
In order for all of this to work, one part of the DAG needs to be
canonicalized *still further* than it currently is. This involves
removing pointless 'trunc' nodes between a zextload and a zext. Without
that, we end up generating spurious masks and hiding the pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147936 91177308-0d34-0410-b5e6-96231b3b80d8
a combined-away node and the result of the combine isn't substantially
smaller than the input, it's just canonicalized. This is the first part
of a significant (7%) performance gain for Snappy's hot decompression
loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147604 91177308-0d34-0410-b5e6-96231b3b80d8
undefined result. This adds new ISD nodes for the new semantics,
selecting them when the LLVM intrinsic indicates that the undef behavior
is desired. The new nodes expand trivially to the old nodes, so targets
don't actually need to do anything to support these new nodes besides
indicating that they should be expanded. I've done this for all the
operand types that I could figure out for all the targets. Owners of
various targets, please review and let me know if any of these are
incorrect.
Note that the expand behavior is *conservatively correct*, and exactly
matches LLVM's current behavior with these operations. Ideally this
patch will not change behavior in any way. For example the regtest suite
finds the exact same instruction sequences coming out of the code
generator. That's why there are no new tests here -- all of this is
being exercised by the existing test suite.
Thanks to Duncan Sands for reviewing the various bits of this patch and
helping me get the wrinkles ironed out with expanding for each target.
Also thanks to Chris for clarifying through all the discussions that
this is indeed the approach he was looking for. That said, there are
likely still rough spots. Further review much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146466 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
Conservatively returns zero when the GV does not specify an alignment nor is it
initialized. Previously it returns ABI alignment for type of the GV. However, if
the type is a "packed" type, then the under-specified alignments is attached to
the load / store instructions. In that case, the alignment of the type cannot be
trusted.
rdar://10464621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145300 91177308-0d34-0410-b5e6-96231b3b80d8
than ABI alignment. These are loads / stores from / to "packed" data structures.
Their alignments are intentionally under-specified.
rdar://10301431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145273 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for trimming constants to GetDemandedBits. This fixes some funky
constant generation that occurs when stores are expanded for targets that don't
support unaligned stores natively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144102 91177308-0d34-0410-b5e6-96231b3b80d8
When this field is true it means that the load is from constant (runt-time or compile-time) and so can be hoisted from loops or moved around other memory accesses
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144100 91177308-0d34-0410-b5e6-96231b3b80d8
If all of the inputs are zero/any_extended, create a new simple BV
which can be further optimized by other BV optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143297 91177308-0d34-0410-b5e6-96231b3b80d8
svn r139159 caused SelectionDAG::getConstant() to promote BUILD_VECTOR operands
with illegal types, even before type legalization. For this testcase, that led
to one BUILD_VECTOR with i16 operands and another with promoted i32 operands,
which triggered the assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142370 91177308-0d34-0410-b5e6-96231b3b80d8
with a vector condition); such selects become VSELECT codegen nodes.
This patch also removes VSETCC codegen nodes, unifying them with SETCC
nodes (codegen was actually often using SETCC for vector SETCC already).
This ensures that various DAG combiner optimizations kick in for vector
comparisons. Passes dragonegg bootstrap with no testsuite regressions
(nightly testsuite as well as "make check-all"). Patch mostly by
Nadav Rotem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139159 91177308-0d34-0410-b5e6-96231b3b80d8
lower XMM register gets in first. This will allow the SUBREG pattern to
elliminate the first vector insertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137310 91177308-0d34-0410-b5e6-96231b3b80d8
hasPredecessorHelper function allows predecessors to be cached to speed up
repeated invocations. This fixes PR10186.
X.isPredecessorOf(Y) now just calls Y.hasPredecessor(X)
Y.hasPredecessor(X) calls Y.hasPredecessorHelper(X, Visited, Worklist) with
empty Visited and Worklist sets (i.e. no caching over invocations).
Y.hasPredecessorHelper(X, Visited, Worklist) caches search state in Visited
and Worklist to speed up repeated calls. The Visited set is searched for X
before going to the worklist to further search the DAG if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134592 91177308-0d34-0410-b5e6-96231b3b80d8
