This is part of the fix for pr10367. A GlobalAlias always has a pointer type,
so just have the constructor build the type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208983 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r208934.
The patch depends on aliases to GEPs with non zero offsets. That is not
supported and fairly broken.
The good news is that GlobalAlias is being redesigned and will have support
for offsets, so this patch should be a nice match for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208978 91177308-0d34-0410-b5e6-96231b3b80d8
Patch replaces old isEquivalentGEP implementation, and changes type of
comparison result from bool (equal or not) to {-1, 0, 1} (less, equal, greater).
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208976 91177308-0d34-0410-b5e6-96231b3b80d8
Patch replaces old isEquivalentOperation implementation, and changes type of
comparison result from bool (equal or not) to {-1, 0, 1} (less, equal, greater).
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208973 91177308-0d34-0410-b5e6-96231b3b80d8
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208953 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements two command line switches -global-merge-on-external
and -global-merge-aligned, and both of them are false by default, so this
optimization is disabled by default for all targets.
For ARM64, some back-end behaviors need to be tuned to get this optimization
further enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208934 91177308-0d34-0410-b5e6-96231b3b80d8
We have to iterate over all the calls that were inlined to find out if
any were musttail.
Sink another variable down to where its used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208913 91177308-0d34-0410-b5e6-96231b3b80d8
The interesting case is what happens when you inline a musttail call
through a musttail call site. In this case, we can't break perfect
forwarding or allow any stack growth.
Instead of merging control flow from the inlined return instruction
after a musttail call into the body of the caller, leave the inlined
return instruction in the caller so that the musttail call stays in the
tail position.
More work is required in http://reviews.llvm.org/D3630 to handle the
case where the inlined function has dynamic allocas or byval arguments.
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D3491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208910 91177308-0d34-0410-b5e6-96231b3b80d8
if ((x & C) == 0) x |= C becomes x |= C
if ((x & C) != 0) x ^= C becomes x &= ~C
if ((x & C) == 0) x ^= C becomes x |= C
if ((x & C) != 0) x &= ~C becomes x &= ~C
if ((x & C) == 0) x &= ~C becomes nothing
Z3 Verifications code for above transform
http://rise4fun.com/Z3/Pmsh
Differential Revision: http://reviews.llvm.org/D3717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208848 91177308-0d34-0410-b5e6-96231b3b80d8
Most importantly, it gives debug location info to the coverage callback.
This change also removes 2 cases of unnecessary setDebugLoc when IRBuilder
is created with the same debug location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208767 91177308-0d34-0410-b5e6-96231b3b80d8
Iterating over a DenseMaop is non-deterministic and results to unpredictable IR
output.
Based on a patch by Daniel Reynaud!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208728 91177308-0d34-0410-b5e6-96231b3b80d8
This allows code to statically accept a Function or a GlobalVariable, but
not an alias. This is already a cleanup by itself IMHO, but the main
reason for it is that it gives a lot more confidence that the refactoring to fix
the design of GlobalAlias is correct. That will be a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208716 91177308-0d34-0410-b5e6-96231b3b80d8
In transformation:
BinOp(shuffle(v1,undef), shuffle(v2,undef)) -> shuffle(BinOp(v1, v2),undef)
type of the undef argument must be same as type of BinOp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208531 91177308-0d34-0410-b5e6-96231b3b80d8
Do not apply transformation:
BinOp(shuffle(v1), shuffle(v2)) -> shuffle(BinOp(v1, v2))
if operands v1 and v2 are of different size.
This change fixes PR19717, which was caused by r208488.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208518 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out that there is a very cheap way of testing whether a block is dead,
just look it up in the DomTree. We have to do this anyways so just ignore
unreachable blocks before sorting by domination. This restores a proper
ordering for std::stable_sort when dead code is present.
Covered by existing tests & buildbots running in STL debug mode (MSVC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208492 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables transformations:
BinOp(shuffle(v1), shuffle(v2)) -> shuffle(BinOp(v1, v2))
BinOp(shuffle(v1), const1) -> shuffle(BinOp, const2)
They allow to eliminate extra shuffles in some cases.
Differential Revision: http://reviews.llvm.org/D3525
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208488 91177308-0d34-0410-b5e6-96231b3b80d8
There is no total ordering if the CFG is disconnected. We don't care if we
catch all CSE opportunities in dead code either so just exclude ignore them in
the assert.
PR19646
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208461 91177308-0d34-0410-b5e6-96231b3b80d8
Since ExtractValue is not included in ComputeSpeculationCost CFGs containing
ExtractValueInsts cannot be simplified. In particular this interacts with
InstCombineCompare's tendency to insert add.with.overflow intrinsics for
certain idiomatic math operations, preventing optimization.
This patch adds ExtractValue to the ComputeSpeculationCost. Test case included
rdar://14853450
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208434 91177308-0d34-0410-b5e6-96231b3b80d8
The change to ExtractGV.cpp has no functionality change except to avoid
the asserts. Existing testcases already cover this, so I didn't add a
new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208264 91177308-0d34-0410-b5e6-96231b3b80d8
This is a third patch of patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
This patch description:
Being comparing functions we need to compare values we meet at left and
right sides.
Its easy to sort things out for external values. It just should be
the same value at left and right.
But for local values (those were introduced inside function body)
we have to ensure they were introduced at exactly the same place,
and plays the same role.
In short, patch introduces values serial numbering and comparison routine.
The last one compares two values by their serial numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208189 91177308-0d34-0410-b5e6-96231b3b80d8
O(N*log(N)). The idea is to introduce total ordering among functions set.
It allows to build binary tree and perform function look-up procedure in O(log(N)) time.
This patch description:
Introduced total ordering among constants implemented in cmpConstants method.
Method performs lexicographical comparison between constants represented as
hypothetical numbers of next format:
<bitcastability-trait><raw-bit-contents>
Please, read cmpConstants declaration comments for more details.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208173 91177308-0d34-0410-b5e6-96231b3b80d8
The number of tail call to loop conversions remains the same (1618 by my count).
The new algorithm does a local scan over the use-def chains to identify local "alloca-derived" values, as well as points where the alloca could escape. Then, a visit over the CFG marks blocks as being before or after the allocas have escaped, and annotates the calls accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208017 91177308-0d34-0410-b5e6-96231b3b80d8
Visibility is meaningless when the linkage is local. Change
`-internalize` to reset the visibility to `default`.
<rdar://problem/16141113>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207979 91177308-0d34-0410-b5e6-96231b3b80d8
Otherwise we use the same threshold as for complete unrolling, which is
way too high. This made us unroll any loop smaller than 150 instructions
by 8 times, but only if someone specified -march=core2 or better,
which happens to be the default on darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207940 91177308-0d34-0410-b5e6-96231b3b80d8
When can't assume a vectorized tree is rooted in an instruction. The IRBuilder
could have constant folded it. When we rebuild the build_vector (the series of
InsertElement instructions) use the last original InsertElement instruction. The
vectorized tree root is guaranteed to be before it.
Also, we can't assume that the n-th InsertElement inserts the n-th element into
a vector.
This reverts r207746 which reverted the revert of the revert of r205018 or so.
Fixes the test case in PR19621.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207939 91177308-0d34-0410-b5e6-96231b3b80d8
There is no point in creating it if we're not going to vectorize
anything. Creating the map is expensive as it creates large values.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207916 91177308-0d34-0410-b5e6-96231b3b80d8
There are public functions that mutate various members as well as
another private member already, so make all the members private to
avoid the discontinuity and add accessors for the values. Should
be no functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207868 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
address to AnalyzeLoadFromClobberingLoad. This fixes a bug in load-PRE where
PRE is applied to a load that is not partially redundant.
<rdar://problem/16638765>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207853 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization merges the common part of a group of GEPs, so we can compute
each pointer address by adding a simple offset to the common part.
The optimization is currently only enabled for the NVPTX backend, where it has
a large payoff on some benchmarks.
Review: http://reviews.llvm.org/D3462
Patch by Jingyue Wu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207783 91177308-0d34-0410-b5e6-96231b3b80d8
=[
Turns out that this was the root cause of PR19621. We found a crasher
only recently (likely due to improvements elsewhere in the SLP
vectorizer) but the reduced test case failed all the way back to here.
I've confirmed that reverting this patch both fixes the reduced test
case in PR19621 and the actual source file that led to it, so it seems
to really be rooted here. I've replied to the commit thread with
discussion of my (feeble) attempts to debug this. Didn't make it very
far, so reverting now that we have a good test case so that things can
get back to healthy while the debugging carries on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207746 91177308-0d34-0410-b5e6-96231b3b80d8
Not all address taken blocks get inlined. The reason is
that a blocks new address is known only when it is cloned. But e.g.
a branch instruction in a different block could need that address earlier
while it gets cloned. The solution is to collect the set of all
blocks that can potentially get inlined and compute a new block address
up front. Then clone and cleanup.
rdar://16427209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207713 91177308-0d34-0410-b5e6-96231b3b80d8
The instcomine logic to handle vpermilvar's pd and 256 variants was incorrect.
The _256 variants have indexes into the individual 128 bit lanes and in all
cases it also has to mask out unused bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207577 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the vectorization remarks to also inform when
vectorization is possible but not beneficial.
Added tests to exercise some loop remarks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207574 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This calls emitOptimizationRemark from the loop unroller and vectorizer
at the point where they make a positive transformation. For the
vectorizer, it reports vectorization and interleave factors. For the
loop unroller, it reports all the different supported types of
unrolling.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207528 91177308-0d34-0410-b5e6-96231b3b80d8
clang directly from the LLVM test suite! That doesn't work. I've
followed up on the review thread to try and get a viable solution sorted
out, but trying to get the tree clean here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207462 91177308-0d34-0410-b5e6-96231b3b80d8
mapping from a basic block to an incoming value, either for removal or
just lookup, is linear in the number of predecessors, and we were doing
this for every entry in the 'Preds' list which is in many cases almost
all of them!
Unfortunately, the fixes are quite ugly. PHI nodes just don't make this
operation easy. The efficient way to fix this is to have a clever
'remove_if' operation on PHI nodes that lets us do a single pass over
all the incoming values of the original PHI node, extracting the ones we
care about. Then we could quickly construct the new phi node from this
list. This would remove the remaining underlying quadratic movement of
unrelated incoming values and the need for silly backwards looping to
"minimize" how often we hit the quadratic case.
This is the last obvious fix for PR19499. It shaves another 20% off the
compile time for me, and while UpdatePHINodes remains in the profile,
most of the time is now stemming from the well known inefficiencies of
LVI and jump threading.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207409 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
Repaired r207302.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207309 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207302 91177308-0d34-0410-b5e6-96231b3b80d8
right intrinsics.
A packed logical shift right with a shift count bigger than or equal to the
element size always produces a zero vector. In all other cases, it can be
safely replaced by a 'lshr' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207299 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
