missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169224 91177308-0d34-0410-b5e6-96231b3b80d8
information will be used by IsEligibleForTailCallOptimization to determine
whether a call can be tail-call optimized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167043 91177308-0d34-0410-b5e6-96231b3b80d8
Previously mips16 was sharing the pattern addr which is used for mips32
and mips64. This had a number of problems:
1) Storing and loading byte and halfword quantities for mips16 has particular
problems due to the primarily non mips16 nature of SP. When we must
load/store byte/halfword stack objects in a function, we must create a mips16
alias register for SP. This functionality is tested in stchar.ll.
2) We need to have an FP register under certain conditions (such as
dynamically sized alloca). We use mips16 register S0 for this purpose.
In this case, we also use this register when accessing frame objects so this
issue also affects the complex pattern addr16. This functionality is
tested in alloca16.ll.
The Mips16InstrInfo.td has been updated to use addr16 instead of addr.
The complex pattern C++ function for addr has been copied to addr16 and
updated to reflect the above issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166897 91177308-0d34-0410-b5e6-96231b3b80d8
The frame object which points to the dynamically allocated area will not be
needed after changes are made to cease reserving call frames.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161076 91177308-0d34-0410-b5e6-96231b3b80d8
The long branch pass (fixed in r160601) no longer uses the global base register
to compute addresses of branch destinations, so it is not necessary to reserve
a slot on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160703 91177308-0d34-0410-b5e6-96231b3b80d8
object for the global base register.
This is the first of a series of patches which implements long branch expansion
for MIPS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158427 91177308-0d34-0410-b5e6-96231b3b80d8
the ones that get or set the frame index for the $gp save slot.
Remove the piece of code in MipsFunctionInfo::getGlobalBaseReg() which returns
GP. This function should always return a virtual register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156695 91177308-0d34-0410-b5e6-96231b3b80d8
If EmitNOAT is true, directives ".set noat" and ".set at" are emitted at the
beginning and end of a function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153528 91177308-0d34-0410-b5e6-96231b3b80d8
reserving a physical register ($gp or $28) for that purpose.
This will completely eliminate loads that restore the value of $gp after every
function call, if the register allocator assigns a callee-saved register, or
eliminate unnecessary loads if it assigns a temporary register.
example:
.cpload $25 // set $gp.
...
.cprestore 16 // store $gp to stack slot 16($sp).
...
jalr $25 // function call. clobbers $gp.
lw $gp, 16($sp) // not emitted if callee-saved reg is chosen.
...
lw $2, 4($gp)
...
jalr $25 // function call.
lw $gp, 16($sp) // not emitted if $gp is not live after this instruction.
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151402 91177308-0d34-0410-b5e6-96231b3b80d8
argument registers on the callee's stack frame, along with functions that set
and get it.
It is not necessary to add the size of this area when computing stack size in
emitPrologue, since it has already been accounted for in
PEI::calculateFrameObjectOffsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144549 91177308-0d34-0410-b5e6-96231b3b80d8
moving them out of the loop. Previously, stores and loads to a stack frame
object were inserted to accomplish this. Remove the code that was needed to do
this. Patch by Sasa Stankovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135415 91177308-0d34-0410-b5e6-96231b3b80d8
nand), atomic.swap and atomic.cmp.swap, all in i8, i16 and i32 versions.
The intrinsics are implemented by creating pseudo-instructions, which are
then expanded in the method MipsTargetLowering::EmitInstrWithCustomInserter.
Patch by Sasa Stankovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132323 91177308-0d34-0410-b5e6-96231b3b80d8
The following improvements are accomplished as a result of applying this patch:
- Fixed frame objects' offsets (relative to either the virtual frame pointer or
the stack pointer) are set before instruction selection is completed. There is
no need to wait until Prologue/Epilogue Insertion is run to set them.
- Calculation of final offsets of fixed frame objects is straightforward. It is
no longer necessary to assign negative offsets to fixed objects for incoming
arguments in order to distinguish them from the others.
- Since a fixed object has its relative offset set during instruction
selection, there is no need to conservatively set its alignment to 4.
- It is no longer necessary to reorder non-fixed frame objects in
MipsFrameLowering::adjustMipsStackFrame.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131915 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.
This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.
This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78142 91177308-0d34-0410-b5e6-96231b3b80d8
carry GlobalBaseReg, and GlobalRetAddr too in Alpha's case. This
eliminates the need for them to search through the
MachineRegisterInfo livein list in order to identify these
virtual registers. EmitLiveInCopies is now the only user of the
virtual register portion of MachineRegisterInfo's livein data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72802 91177308-0d34-0410-b5e6-96231b3b80d8
Added fp register clobbering during calls.
Added AsmPrinter support for "fmask", a bitmask that indicates where on the
stack the fp callee saved registers are.
Fixed the stack frame layout for Mips, now the callee saved regs
are in the right stack location (a little documentation about how this
stack frame must look like is present in MipsRegisterInfo.cpp).
This was done using the method MipsRegisterInfo::adjustMipsStackFrame
To be more clear, these are examples of what is solves :
1) FP and RA are also callee saved, and despite they aren't in CSI they
must be saved before the fp callee saved registers.
2) The ABI requires that local varibles are allocated before the callee
saved register area, the opposite behavior from the default allocation.
3) CPU and FPU saved register area must be aligned independent of each
other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54403 91177308-0d34-0410-b5e6-96231b3b80d8
important.
- Cleanup in the Subtarget info with addition of new features, not all support
yet, but they allow the future inclusion of features easier. Among new features,
we have : Arch family info (mips1, mips2, ...), ABI info (o32, eabi), 64-bit
integer
and float registers, allegrex vector FPU (VFPU), single float only support.
- TargetMachine now detects allegrex core.
- Added allegrex (Mips32r2) sext_inreg instructions.
- *Added Float Point Instructions*, handling single float only, and
aliased accesses for 32-bit FPUs.
- Some cleanup in FP instruction formats and FP register classes.
- Calling conventions improved to support mips 32-bit EABI.
- Added Asm Printer support for fp cond codes.
- Added support for sret copy to a return register.
- EABI support added into LowerCALL and FORMAL_ARGS.
- MipsFunctionInfo now keeps a virtual register per function to track the
sret on function entry until function ret.
- MipsInstrInfo FP support into methods (isMoveInstr, isLoadFromStackSlot, ...),
FP cond codes mapping and initial FP Branch Analysis.
- Two new Mips SDNode to handle fp branch and compare instructions : FPBrcond,
FPCmp
- MipsTargetLowering : handling different FP classes, Allegrex support, sret
return copy, no homing location within EABI, non 32-bit stack objects
arguments, and asm constraint for float.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53146 91177308-0d34-0410-b5e6-96231b3b80d8
- Added a function to hold the stack location
where GP must be stored during LowerCALL
- AsmPrinter now emits directives based on
relocation type
- PIC_ set to default relocation type (same as GCC)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42779 91177308-0d34-0410-b5e6-96231b3b80d8
