of all sizes from i1 to i256. The code is not
always that great, for example (x86)
movw %di, %ax
movw %ax, i17_s
where the store could be directly from %di.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53677 91177308-0d34-0410-b5e6-96231b3b80d8
sizes from i1 to i256. The generated code is
like one huge bug report of things that the DAG
combiner fails to simplify!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53676 91177308-0d34-0410-b5e6-96231b3b80d8
variable expansions involving the $ character.
This fixes 4 tests that were not running properly before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52183 91177308-0d34-0410-b5e6-96231b3b80d8
don't fail when (expected) error output is produced. This fixes 17 tests.
While I was there, I also made all RUN lines of the form "not llvm-as..." a bit
more consistent, they now all redirect stderr and stdout to /dev/null and use
input redirect to read their input.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52174 91177308-0d34-0410-b5e6-96231b3b80d8
to the block that defines their operands. This doesn't work in the
case that the operand is an invoke, because invoke is a terminator
and must be the last instruction in a block.
Replace it with support in SelectionDAGISel for copying struct values
into sequences of virtual registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50279 91177308-0d34-0410-b5e6-96231b3b80d8
the automated CallingConv code to handle return values typically
don't support multiple return values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48265 91177308-0d34-0410-b5e6-96231b3b80d8
after legalize. Just because a constant is legal (e.g. 0.0 in SSE)
doesn't mean that its negated value is legal (-0.0). We could make
this stronger by checking to see if the negated constant is actually
legal post negation, but it doesn't seem like a big deal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47591 91177308-0d34-0410-b5e6-96231b3b80d8
CTTZ and CTPOP. The expansion code differs from
that in LegalizeDAG in that it chooses to take the
CTLZ/CTTZ count from the Hi/Lo part depending on
whether the Hi/Lo value is zero, not on whether
CTLZ/CTTZ of Hi/Lo returned 32 (or whatever the
width of the type is) for it. I made this change
because the optimizers may well know that Hi/Lo
is zero and exploit it. The promotion code for
CTTZ also differs from that in LegalizeDAG: it
uses an "or" to get the right result when the
original value is zero, rather than using a compare
and select. This also means the value doesn't
need to be zero extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47075 91177308-0d34-0410-b5e6-96231b3b80d8
any bugs in the future since to get the crash you also
need hacked in fake libcall support (which creates odd
but legal trees), but since adding it doesn't hurt...
Thanks to Chris for this ultimately reduced version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46706 91177308-0d34-0410-b5e6-96231b3b80d8
delete a node even if it was not dead in some cases. Instead, just add it to
the worklist. Also, make sure to use the CombineTo methods, as it was doing
things that were unsafe: the top level combine loop could touch dangling memory.
This fixes CodeGen/Generic/2008-01-25-dag-combine-mul.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46384 91177308-0d34-0410-b5e6-96231b3b80d8
providing a misleading facility. It's used once in the MIPS backend
and hardcoded as "\t.globl\t" everywhere else.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45676 91177308-0d34-0410-b5e6-96231b3b80d8
values, which means doing extra legalization work.
It would be easier to get this kind of thing right if
there was some documentation...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45472 91177308-0d34-0410-b5e6-96231b3b80d8
define void @f() {
...
call i32 @g()
...
}
define void @g() {
...
}
The hazards are:
- @f and @g have GC, but they differ GC. Inlining is invalid. This
may never occur.
- @f has no GC, but @g does. g's GC must be propagated to @f.
The other scenarios are safe:
- @f and @g have the same GC.
- @f and @g have no GC.
- @g has no GC.
This patch adds inliner checks for the former two scenarios.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45351 91177308-0d34-0410-b5e6-96231b3b80d8
function with GC.
This will catch the error when the inliner inlines a function with
GC into a caller with no GC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45350 91177308-0d34-0410-b5e6-96231b3b80d8
how to lower them (with no attempt made to be
efficient, since they should only occur for
unoptimized code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45108 91177308-0d34-0410-b5e6-96231b3b80d8
methods are new to Function:
bool hasCollector() const;
const std::string &getCollector() const;
void setCollector(const std::string &);
void clearCollector();
The assembly representation is as such:
define void @f() gc "shadow-stack" { ...
The implementation uses an on-the-side table to map Functions to
collector names, such that there is no overhead. A StringPool is
further used to unique collector names, which are extremely
likely to be unique per process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44769 91177308-0d34-0410-b5e6-96231b3b80d8
node A gets back into the DAG again because it was hiding in
one of the node maps: make sure that node replacement happens
in those maps too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44263 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM now enforces the following prototypes for the write barriers:
<ty>* @llvm.gcread(<ty2>*, <ty>**)
void @llvm.gcwrite(<ty>*, <ty2>*, <ty>**)
And for @llvm.gcroot, the first stack slot is verified to be an alloca or a
bitcast of an alloca.
Fixes test/CodeGen/Generic/GC/lower_gcroot.ll, which violated these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42051 91177308-0d34-0410-b5e6-96231b3b80d8
latest EH changes, and in any case it is hard to
imagine how the original bug could be reintroduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41497 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
mnemonics from their operands instead of single spaces. This makes the
assembly output a little more consistent with various other compilers
(f.e. GCC), and slightly easier to read. Also, update the regression
tests accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40648 91177308-0d34-0410-b5e6-96231b3b80d8
Move tests that have C/C++ sources into the appropriate directory. This
allows them to be selected for testing based on whether llvm-gcc is
present or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39963 91177308-0d34-0410-b5e6-96231b3b80d8
Rearrange some tests so that if PowerPC is not being built we don't try to
run PowerPC specific tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36587 91177308-0d34-0410-b5e6-96231b3b80d8
Remove && from the end of the lines to prevent tests from throwing run
lines into the background. Also, clean up places where the same command
is run multiple times by using a temporary file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36142 91177308-0d34-0410-b5e6-96231b3b80d8
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35918 91177308-0d34-0410-b5e6-96231b3b80d8
1. Fix some bugs in the jump table lowering threshold
2. Implement much better metric for optimal pivot selection
3. Tune thresholds for different lowering methods
4. Implement shift-and trick for lowering small (<machine word
length) cases with few destinations. Good testcase will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35816 91177308-0d34-0410-b5e6-96231b3b80d8
go to the same destination. Now we're producing really good code for
switch-lower-feature.ll testcase
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35672 91177308-0d34-0410-b5e6-96231b3b80d8
Update these test cases to use proper signatures for bswap which is now
and overloaded intrinsic. Its name must be of the form llvm.bswap.i32.i32
since both the parameter and the result or of type "iAny". Also, the
bit counting intrinsics changed to always return i32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35548 91177308-0d34-0410-b5e6-96231b3b80d8
Remove "target endian/pointersize" or add "target datalayout" to make
the test parse properly or set the datalayout because defaults changes.
For PR645:
Make global names use the @ prefix.
For llvm-upgrade changes:
Fix test cases or completely remove use of llvm-upgrade for test cases
that cannot survive the new renaming or upgrade capabilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33533 91177308-0d34-0410-b5e6-96231b3b80d8
Update the test suite to accommodate the change from signed integer types
to signless integer types. The changes were of only a few kinds:
1. Make sure llvm-upgrade is run on the source which does the bulk of the
changes automatically.
2. Change things like "grep 'int'" to "grep 'i32'"
3. In several tests bitcasting caused the same name to be reused in the
same type plane. These had to be manually fixed. The fix was (generally)
to leave the bitcast and provide the instruction with a new name. This
should not affect the semantics of the test. In a few cases, the
bitcasts were known to be superfluous and irrelevant to the test case
so they were removed.
4. One test case uses a bytecode file which needed to be updated to the
latest bytecode format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32789 91177308-0d34-0410-b5e6-96231b3b80d8
