This has caused some local failures. Updating the test case to be more
like the majority of the similar test cases.
Committing on behalf of Hubert Tong (hstong@ca.ibm.com).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237449 91177308-0d34-0410-b5e6-96231b3b80d8
collectUpperBound hits an assertion when the back edge count is wider then the desired type.
If that happens, truncate the backedge count.
Patch by Philip Pfaffe!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237439 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To maintain compatibility with GAS, we need to stop treating negative 32-bit immediates as 64-bit values when expanding LI/DLI.
This currently happens because of sign extension.
To do this we need to choose the 32-bit value expansion for values which use their upper 33 bits only for sign extension (i.e. no 0's, only 1's).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8662
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237428 91177308-0d34-0410-b5e6-96231b3b80d8
This adds new SDNodes for signed/unsigned min/max. These nodes are built from
select/icmp pairs matched at SDAGBuilder stage.
This patch adds the nodes, as well as legalization support and sets them to
be "expand" for all targets.
NFC for now; this will be tested when I switch AArch64 to using these new
nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237423 91177308-0d34-0410-b5e6-96231b3b80d8
Transfer the calling convention from the invoke being replaced by
PlaceStatepoints to the new invoke to gc.statepoint created. Add a test
case that would have caught this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237414 91177308-0d34-0410-b5e6-96231b3b80d8
rL236672 would generate all invoke statepoints with deopt args set to a
list containing the single element "0", instead of an empty list.
Also add a test case that would have caught this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237413 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of doing that, create a temporary copy of MCTargetOptions and reset its
SanitizeAddress field based on the function's attribute every time an InlineAsm
instruction is emitted in AsmPrinter::EmitInlineAsm.
This is part of the work to remove TargetMachine::resetTargetOptions (the FIXME
added to TargetMachine.cpp in r236009 explains why this function has to be
removed).
Differential Revision: http://reviews.llvm.org/D9570
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237412 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Extract method haveNoCommonBitsSet so that we don't have to duplicate this logic in
InstCombine and SeparateConstOffsetFromGEP.
This patch also makes SeparateConstOffsetFromGEP more precise by passing
DominatorTree to computeKnownBits.
Test Plan: value-tracking-domtree.ll that tests ValueTracking indeed leverages dominating conditions
Reviewers: broune, meheff, majnemer
Reviewed By: majnemer
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237407 91177308-0d34-0410-b5e6-96231b3b80d8
This commit gives the users of the YAML Traits I/O library
the ability to serialize scalars using the YAML literal block
scalar notation by allowing them to implement a specialization
of the `BlockScalarTraits` struct for their custom types.
Reviewers: Duncan P. N. Exon Smith
Differential Revision: http://reviews.llvm.org/D9613
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237404 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a SHA1 implementation taken from public domain code.
The change is trivial, but as it involves third-party code I'd like
a second pair of eyes before commit.
LibFuzzer can not use SHA1 from openssl because openssl may not be available
and because we may be fuzzing openssl itself.
Using sha1sum via a pipe is too slow.
Test Plan: n/a
Reviewers: chandlerc
Reviewed By: chandlerc
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D9733
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237400 91177308-0d34-0410-b5e6-96231b3b80d8
The commit r237314 that implements YAML block parsing
introduced a leak that was caught by the ASAN linux buildbot.
YAML Parser stores its tokens in an ilist, and allocates
tokens using a BumpPtrAllocator, but doesn't call the
destructor for the allocated tokens. R237314 added an
std::string field to a Token which leaked as the Token's
destructor wasn't called. This commit fixes this leak
by calling the Token's destructor when a Token is being
removed from an ilist of tokens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237389 91177308-0d34-0410-b5e6-96231b3b80d8
Function 'ConstantFoldScalarCall' (in ConstantFolding.cpp) works under the
wrong assumption that a call to 'convert.from.fp16' returns a value of
type 'float'.
However, intrinsic 'convert.from.fp16' can be overloaded; for example, we
can call 'convert.from.fp16.f64' to convert from half to double; etc.
Before this patch, the following example would have triggered an assertion
failure in opt (with -constprop):
```
define double @foo() {
entry:
%0 = call double @llvm.convert.from.fp16.f64(i16 0)
ret double %0
}
```
This patch fixes the problem in ConstantFolding.cpp. When folding a call to
convert.from.fp16, we perform a different kind of conversion based on the call
return type.
Added test 'Transform/ConstProp/convert-from-fp16.ll'.
Differential Revision: http://reviews.llvm.org/D9771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237377 91177308-0d34-0410-b5e6-96231b3b80d8
After converting a loop to a hardware loop, the pass should remove
any unnecessary instructions from the old compare-and-branch
code. This patch removes a dead constant assignment that was
used in the compare instruction.
Differential Revision: http://reviews.llvm.org/D9720
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237373 91177308-0d34-0410-b5e6-96231b3b80d8
If the loop trip count may underflow or wrap, the compiler should
not generate a hardware loop since the trip count will be
incorrect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237365 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When we are trying to fill the delay slot of a call instruction, we must avoid
filler instructions that use the $ra register. This fixes the test
MultiSource/Applications/JM/lencod when we enable the forward delay slot filler.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9670
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237362 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This implements the initial version as was proposed earlier this year
(http://lists.cs.uiuc.edu/pipermail/llvmdev/2015-January/080462.html).
Since then Loop Access Analysis was split out from the Loop Vectorizer
and was made into a separate analysis pass. Loop Distribution becomes
the second user of this analysis.
The pass is off by default and can be enabled
with -enable-loop-distribution. There is currently no notion of
profitability; if there is a loop with dependence cycles, the pass will
try to split them off from other memory operations into a separate loop.
I decided to remove the control-dependence calculation from this first
version. This and the issues with the PDT are actively discussed so it
probably makes sense to treat it separately. Right now I just mark all
terminator instruction required which keeps identical CFGs for each
distributed loop. This seems to be working pretty well for 456.hmmer
where even though there is an empty if-then block in the distributed
loop initially, it gets completely removed.
The pass keeps DominatorTree and LoopInfo updated. I've tested this
with -loop-distribute-verify with the testsuite where we distribute ~90
loops. SimplifyLoop is violated in some cases and I have a FIXME
covering this.
Reviewers: hfinkel, nadav, aschwaighofer
Reviewed By: aschwaighofer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237358 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we only pass the necessary operands, we don't have to determine the position of the symbol operand when entering expandLoadAddressSym().
This simplifies the expandLoadAddressSym() code.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237355 91177308-0d34-0410-b5e6-96231b3b80d8
i1 type is a legal type on AVX-512 and can be passed as parameter or return value.
i1 is promoted to i8 on return and to i32 for call arguments (i8 is also promoted to i32 here).
The result code is similar to the previous X86 targets, where i1 is allways promoted to i8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237350 91177308-0d34-0410-b5e6-96231b3b80d8
Found by ubsan. This was taking a bool and left shifting by 32 - the
result is 64 bit, so we should really do the math in a type it fits
in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237345 91177308-0d34-0410-b5e6-96231b3b80d8
The outer if had 3 separate conditions ORed together and then the inner ifs detected which of the three conditions it was by using only a portion of the specific condition. Just put the whole condition in each inner if and remove the outer if.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237343 91177308-0d34-0410-b5e6-96231b3b80d8
