When spilling around an instruction with a dead def, remember to add a
value number for the def.
The missing value number wouldn't normally create problems since there
would be an incoming live range as well. However, due to another bug
we could spill a dead V_SET0 instruction which doesn't read any values.
The missing value number caused an empty live range to be created which
is dangerous since it doesn't interfere with anything.
This fixes part of PR11125.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141923 91177308-0d34-0410-b5e6-96231b3b80d8
have the same address as the one we deleted, and we don't want that in the set
yet. Noticed by inspection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141849 91177308-0d34-0410-b5e6-96231b3b80d8
Now that MI->getRegClassConstraint() can also handle inline assembly,
don't bail when recomputing the register class of a virtual register
used by inline asm.
This fixes PR11078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141836 91177308-0d34-0410-b5e6-96231b3b80d8
Most instructions have some requirements for their register operands.
Usually, this is expressed as register class constraints in the
MCInstrDesc, but for inline assembly the constraints are encoded in the
flag words.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141835 91177308-0d34-0410-b5e6-96231b3b80d8
The inline asm operand constraint is initially encoded in the virtual
register for the operand, but that register class may change during
coalescing, and the original constraint is lost.
Encode the original register class as part of the flag word for each
inline asm operand. This makes it possible to recover the actual
constraint required by inline asm, just like we can for normal
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141833 91177308-0d34-0410-b5e6-96231b3b80d8
our current machine instruction defines a register with the same register class
as what's being replaced. This showed up in the SPEC 403.gcc benchmark, where it
would ICE because a tail call was expecting one register class but was given
another. (The machine instruction verifier catches this situation.)
<rdar://problem/10270968>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141830 91177308-0d34-0410-b5e6-96231b3b80d8
rather than the previous index. If a block has a single instruction, the
previous index may be in a different basic block.
I have no clue how this used to work on all of test-suite, because now this
failure is seen quite often when trying to compile code with -strong-phi-elim.
This fixes PR10252.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141812 91177308-0d34-0410-b5e6-96231b3b80d8
containing loop's header to see if that's a landing pad. If it is, then we don't
want to hoist instructions out of the loop and above the header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141767 91177308-0d34-0410-b5e6-96231b3b80d8
1. The speculation check may not have been performed if the BB hasn't had a load
LICM candidate.
2. If the candidate would be CSE'ed, then go ahead and speculatively LICM the
instruction even if it's in high register pressure situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141747 91177308-0d34-0410-b5e6-96231b3b80d8
file. Since it should only be used when necessary propagate it through
the backend code generation and tweak testcases accordingly.
This helps with code like in clang's test/CodeGen/debug-info-line.c where
we have multiple #line directives within a single lexical block and want
to generate only a single block that contains each file change.
Part of rdar://10246360
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141729 91177308-0d34-0410-b5e6-96231b3b80d8
The blocks with invokes have branches to the dispatch block, because that more
correctly models the behavior of the CFG. The dispatch of course has edges to
the landing pads. Those landing pads could contain invokes, which then have
branches back to the dispatch. This creates a loop. The machine LICM pass looks
at this loop and thinks it can hoist elements out of it. But because the
dispatch is an alternate entry point into the program, the hoisted instructions
won't be executed.
I wasn't able to get a testcase which was small and could reproduce all of the
time. The function_try_block.cpp in llvm-test was where this showed up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141726 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141689 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to expand COPY and other standard pseudo-instructions
before they are expanded with copyPhysReg().
This allows the target to examine the COPY instruction for extra
operands indicating it can be widened to a preferable super-register
copy. See the ARM -widen-vmovs option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141578 91177308-0d34-0410-b5e6-96231b3b80d8
For example, MachineLICM should not hoist a load that is not guaranteed to be executed.
Radar 10254254.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141569 91177308-0d34-0410-b5e6-96231b3b80d8
across unwind edges. This is for the back-end which expects such things.
The code is from the original SjLj EH pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141463 91177308-0d34-0410-b5e6-96231b3b80d8
to the landing pad. This will be used by the back-end to generate the jump
tables for dispatching the arriving longjmp in sjlj eh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141224 91177308-0d34-0410-b5e6-96231b3b80d8
PhysReg operands are not allowed to have sub-register indices at all.
For virtual registers with sub-reg indices, check that all registers in
the register class support the sub-reg index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141220 91177308-0d34-0410-b5e6-96231b3b80d8
EXTRACT_SUBREG is emitted as %dst = COPY %src:sub, so there is no need to
constrain the %dst register class. RegisterCoalescer will apply the
necessary constraints if it decides to eliminate the COPY.
The %src register class does need to be constrained to something with
the right sub-registers, though. This is currently done manually with
COPY_TO_REGCLASS nodes. They can possibly be removed after this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141207 91177308-0d34-0410-b5e6-96231b3b80d8
The register class created by INSERT_SUBREG and SUBREG_TO_REG must be
legal and support the SubIdx sub-registers.
The new getSubClassWithSubReg() hook can compute that.
This may create INSERT_SUBREG instructions defining a larger register
class than the sub-register being inserted. That is OK,
RegisterCoalescer will constrain the register class as needed when it
eliminates the INSERT_SUBREG instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141198 91177308-0d34-0410-b5e6-96231b3b80d8
TwoAddressInstructionPass should annotate instructions with <undef>
flags when it lower REG_SEQUENCE instructions. LiveIntervals should not
be in the business of modifying code (except for kill flags, perhaps).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141187 91177308-0d34-0410-b5e6-96231b3b80d8
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
is rewritten as:
%D2<def> = COPY %D0, %Q1<imp-def>
%D3<def> = COPY %D1, %Q1<imp-use,kill>, %Q1<imp-def>
The first COPY doesn't care about the previous value of %Q1, so it
doesn't read that register.
The second COPY is a partial redefinition of %Q1, so it implicitly kills
and redefines that register.
This makes it possible to recognize instructions that can harmlessly
clobber the full super-register. The write and don't read the
super-register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141139 91177308-0d34-0410-b5e6-96231b3b80d8
RegisterCoalescer can create sub-register defs when it is joining a
register with a sub-register. Add <undef> flags to these new
sub-register defs where appropriate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141138 91177308-0d34-0410-b5e6-96231b3b80d8
The <undef> flag says that a MachineOperand doesn't read its register,
or doesn't depend on the previous value of its register.
A full register def never depends on the previous register value. A
partial register def may depend on the previous value if it is intended
to update part of a register.
For example:
%vreg10:dsub_0<def,undef> = COPY %vreg1
%vreg10:dsub_1<def> = COPY %vreg2
The first copy instruction defines the full %vreg10 register with the
bits not covered by dsub_0 defined as <undef>. It is not considered a
read of %vreg10.
The second copy modifies part of %vreg10 while preserving the rest. It
has an implicit read of %vreg10.
This patch adds a MachineOperand::readsReg() method to determine if an
operand reads its register.
Previously, this was modelled by adding a full-register <imp-def>
operand to the instruction. This approach makes it possible to
determine directly from a MachineOperand if it reads its register. No
scanning of MI operands is required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141124 91177308-0d34-0410-b5e6-96231b3b80d8
and the alignment is 0 (i.e., it's defined globally in one file and declared in
another file) it could get an alignment which is larger than the ABI allows for
that type, resulting in aligned moves being used for unaligned loads.
For instance, in file A.c:
struct S s;
In file B.c:
struct {
// something long
};
extern S s;
void foo() {
struct S p = s;
// ...
}
this copy is a 'memcpy' which is turned into a series of 'movaps' instructions
on X86. But this is wrong, because 'struct S' has alignment of 4, not 16.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140902 91177308-0d34-0410-b5e6-96231b3b80d8
This helps with porting code from 2.9 to 3.0 as TargetSelect.h changed location,
and if you include the old one by accident you will trigger this assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140848 91177308-0d34-0410-b5e6-96231b3b80d8
The function needs to scan the implicit operands anyway, so no
performance is won by caching the number of implicit operands added to
an instruction.
This also fixes a bug when adding operands after an implicit operand has
been added manually. The NumImplicitOps count wasn't kept up to date.
MachineInstr::addOperand() will now consistently place all explicit
operands before all the implicit operands, regardless of the order they
are added. It is possible to change an MI opcode and add additional
explicit operands. They will be inserted before any existing implicit
operands.
The only exception is inline asm instructions where operands are never
reordered. This is because of a hack that marks explicit clobber regs
on inline asm as <implicit-def> to please the fast register allocator.
This hack can go away when InstrEmitter and FastIsel can add exact
<dead> flags to physreg defs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140744 91177308-0d34-0410-b5e6-96231b3b80d8
Upon further review, most of the EH code should remain written at the IR
level. The part which breaks SSA form is the dispatch table, so that part will
be moved to the back-end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140730 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is used to pass the index of the function context to the back-end
for further processing. The back-end is in charge of filling in the rest of the
entries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140676 91177308-0d34-0410-b5e6-96231b3b80d8
The DWARF exception pass uses the call site information, which is set up here. A
pre-RA pass is too late for it to use this information. So create and setup the
function context here, and then insert the call site values here (and map the
call sites for the DWARF EH pass). This is simpler than the original pass, and
doesn't make the CFG lose its SSA-ness.
It's a win-win-win-win-lose-win-win situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140675 91177308-0d34-0410-b5e6-96231b3b80d8
current IR-level pass.
The old SjLj EH pass has some problems, especially with the new EH model. Most
significantly, it violates some of the new restrictions the new model has. For
instance, the 'dispatch' table wants to jump to the landing pad, but we cannot
allow that because only an invoke's unwind edge can jump to a landing pad. This
requires us to mangle the code something awful. In addition, we need to keep the
now dead landingpad instructions around instead of CSE'ing them because the
DWARF emitter uses that information (they are dead because no control flow edge
will execute them - the control flow edge from an invoke's unwind is superceded
by the edge coming from the dispatch).
Basically, this pass belongs not at the IR level where SSA is king, but at the
code-gen level, where we have more flexibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140646 91177308-0d34-0410-b5e6-96231b3b80d8
Many targets use pseudo instructions to help register allocation. Like
the COPY instruction, these pseudos can be expanded after register
allocation. The early expansion can make life easier for PEI and the
post-ra scheduler.
This patch adds a hook that is called for all remaining pseudo
instructions from the ExpandPostRAPseudos pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140472 91177308-0d34-0410-b5e6-96231b3b80d8
SDNodes may return values which are wider than the incoming element types. In
this patch we fix the integer promotion of these nodes.
Fixes spill-q.ll when running -promote-elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140471 91177308-0d34-0410-b5e6-96231b3b80d8
I'll fix the file contents in the next commit.
This pass is currently expanding the COPY and SUBREG_TO_REG pseudos. I
am going to add a hook so targets can expand more pseudo-instructions
after register allocation.
Many targets have pseudo-instructions that assist the register
allocator. They can be expanded after register allocation, before PEI
and PostRA scheduling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140469 91177308-0d34-0410-b5e6-96231b3b80d8
(this is always the case for scalars), otherwise use the promoted result type.
Fix test/CodeGen/X86/vsplit-and.ll when promote-elements is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140464 91177308-0d34-0410-b5e6-96231b3b80d8
When generating the trunc-store of i1's, we need to use the vector type and not
the scalar type.
This patch fixes the assertion in CodeGen/Generic/bool-vector.ll when
running with -promote-elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140463 91177308-0d34-0410-b5e6-96231b3b80d8
DecomposeMERGE_VALUES to "know" that results are legalized in
a particular order, by passing it the number of the result
being legalized (the type legalization core provides this, it
just needs to be passed on).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140373 91177308-0d34-0410-b5e6-96231b3b80d8
integer-promotion of CONCAT_VECTORS.
Test: test/CodeGen/X86/widen_shuffle-1.ll
This patch fixes the above tests (when running in with -promote-elements).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140372 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes register class constraints are trivial, like GR32->GR32_NOSP,
or GPR->rGPR. Teach InstrEmitter to simply constrain the virtual
register instead of emitting a copy in these cases.
Normally, these copies are handled by the coalescer. This saves some
coalescer work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140340 91177308-0d34-0410-b5e6-96231b3b80d8
The function will refuse to use a register class with fewer registers
than MinNumRegs. This can be used by clients to avoid accidentally
increase register pressure too much.
The default value of MinNumRegs=0 doesn't affect how constrainRegClass()
works.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140339 91177308-0d34-0410-b5e6-96231b3b80d8
Few weeks ago, llvm completely inverted the debug info graph. Earlier each debug info node used to keep track of its compile unit, now compile unit keeps track of important nodes. One impact of this change is that the global variable's do not have any context, which should be checked before deciding to use AT_specification DIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140282 91177308-0d34-0410-b5e6-96231b3b80d8
Vector SetCC result types need to be type-legalized.
This code worked before because scalar result types are known to be legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140249 91177308-0d34-0410-b5e6-96231b3b80d8