The MCJIT doesn't need or want a TargetJITInfo. That's vestigal from the old
JIT, so just remove it.
rdar://12119347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162280 91177308-0d34-0410-b5e6-96231b3b80d8
No new tests are added.
All tests in ExecutionEngine/MCJIT that have been failing pass after this patch
is applied (when "make check" is done on a mips board).
Patch by Petar Jovanovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162135 91177308-0d34-0410-b5e6-96231b3b80d8
allocations of executable memory would not be padded
to account for the size of the allocation header.
This resulted in undersized allocations, meaning that
when the allocation was written to later the next
allocation's header would be corrupted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161984 91177308-0d34-0410-b5e6-96231b3b80d8
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159312 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158096 91177308-0d34-0410-b5e6-96231b3b80d8
IntRange converted from struct to class. So main change everywhere is replacement of ".Low/High" with ".getLow/getHigh()"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157884 91177308-0d34-0410-b5e6-96231b3b80d8
IntItem cleanup. IntItemBase, IntItemConstantIntImp and IntItem merged into IntItem. All arithmetic operators was propogated from APInt. Also added comparison operators <,>,<=,>=. Currently you will find set of macros that propogates operators from APInt to IntItem in the beginning of IntegerSubset. Note that THESE MACROS WILL REMOVED after all passes will case-ranges compatible. Also note that these macros much smaller pain that something like this:
if (V->getValue().ugt(AnotherV->getValue()) { ... }
These changes made IntItem full featured integer object. It allows to make IntegerSubset class generic (move out all ConstantInt references inside and add unit-tests) in next commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157810 91177308-0d34-0410-b5e6-96231b3b80d8
Implemented IntItem - the wrapper around APInt. Why not to use APInt item directly right now?
1. It will very difficult to implement case ranges as series of small patches. We got several large and heavy patches. Each patch will about 90-120 kb. If you replace ConstantInt with APInt in SwitchInst you will need to changes at the same time all Readers,Writers and absolutely all passes that uses SwitchInst.
2. We can implement APInt pool inside and save memory space. E.g. we use several switches that works with 256 bit items (switch on signatures, or strings). We can avoid value duplicates in this case.
3. IntItem can be easyly easily replaced with APInt.
4. Currenly we can interpret IntItem both as ConstantInt and as APInt. It allows to provide SwitchInst methods that works with ConstantInt for non-updated passes.
Why I need it right now? Currently I need to update SimplifyCFG pass (EqualityComparisons). I need to work with APInts directly a lot, so peaces of code
ConstantInt *V = ...;
if (V->getValue().ugt(AnotherV->getValue()) {
...
}
will look awful. Much more better this way:
IntItem V = ConstantIntVal->getValue();
if (AnotherV < V) {
}
Of course any reviews are welcome.
P.S.: I'm also going to rename ConstantRangesSet to IntegersSubset, and CRSBuilder to IntegersSubsetMapping (allows to map individual subsets of integers to the BasicBlocks).
Since in future these classes will founded on APInt, it will possible to use them in more generic ways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157576 91177308-0d34-0410-b5e6-96231b3b80d8
It's more flexible for MCJIT tasks, in addition it's provides a invalidation instruction cache for code sections which will be used before JIT code will be executed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156933 91177308-0d34-0410-b5e6-96231b3b80d8
optional library support to the llvm-build tool:
- Add new command line parameter to llvm-build: “--enable-optional-libraries”
- Add handing of new llvm-build library type “OptionalLibrary”
- Update Cmake and automake build systems to pass correct flags to llvm-build
based on configuration
Patch by Dan Malea!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156319 91177308-0d34-0410-b5e6-96231b3b80d8
- Improved parameter names for clarity
- Added comments
- emitCommonSymbols should return void because its return value is not being
used anywhere
- Attempt to reduce the usage of the RelocationValueRef type. Restricts it
for a single goal and may serve as a step for eventual removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155908 91177308-0d34-0410-b5e6-96231b3b80d8
- There's no point having a different type for the local and global symbol
tables.
- Renamed SymbolTable to GlobalSymbolTable to clarify the intention
- Improved const correctness where relevant
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155898 91177308-0d34-0410-b5e6-96231b3b80d8
relocations are resolved. It's much more reasonable to do this decision when
relocations are just being added - we have all the information at that point.
Also a bit of renaming and extra comments to clarify extensions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155819 91177308-0d34-0410-b5e6-96231b3b80d8
- Add comments
- Change field names to be more reasonable
- Fix indentation and naming to conform to coding conventions
- Remove unnecessary includes / replace them by forward declatations
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155815 91177308-0d34-0410-b5e6-96231b3b80d8
the MCJIT execution engine.
The GDB JIT debugging integration support works by registering a loaded
object image with a pre-defined function that GDB will monitor if GDB
is attached. GDB integration support is implemented for ELF only at this
time. This integration requires GDB version 7.0 or newer.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154868 91177308-0d34-0410-b5e6-96231b3b80d8
of zero-initialized sections, virtual sections and common symbols
and preventing the loading of sections which are not required for
execution such as debug information.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154610 91177308-0d34-0410-b5e6-96231b3b80d8
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153754 91177308-0d34-0410-b5e6-96231b3b80d8
relocations. The algorithm is the same as
that for x86_64. Scattered relocations, a
feature present in i386 but not on x86_64,
are not yet supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153466 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary if the client wants to be able to mutate TargetOptions (for example, fast FP math mode) after the initial creation of the ExecutionEngine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153342 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153205 91177308-0d34-0410-b5e6-96231b3b80d8
relocations (i.e., pieces of data whose addresses
are referred to elsewhere in the binary image) and
update the references when the section containing
the relocations moves. The way this works is that
there is a map from section IDs to lists of
relocations.
Because the relocations are associated with the
section containing the data being referred to, they
are updated only when the target moves. However,
many data references are relative and also depend
on the location of the referrer.
To solve this problem, I introduced a new data
structure, Referrer, which simply contains the
section being referred to and the index of the
relocation in that section. These referrers are
associated with the source containing the
reference that needs to be updated, so now
regardless of which end of the relocation moves,
the relocation will now be updated correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153147 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152532 91177308-0d34-0410-b5e6-96231b3b80d8
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152297 91177308-0d34-0410-b5e6-96231b3b80d8
code that will be relocated into another memory space.
Now when relocations are resolved, the address of
the relocation in the host memory (where the JIT is)
is passed separately from the address that the
relocation will be at in the target memory (where
the code will run).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152264 91177308-0d34-0410-b5e6-96231b3b80d8
In historical reason, Interpreter's external entries had prefix "lle_X_" as C linkage, even for well-known entries in EE/Interpreter.
Now, at least on ToT, they are resolved via FuncNames[] mapper.
We will not need their symbols are expected to be exported any more.
Clang r150128 has introduced the warning <"%0 has C-linkage specified, but returns user-defined type %1 which is incompatible with C">.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151312 91177308-0d34-0410-b5e6-96231b3b80d8
- Use unsigned literals when the desired result is unsigned. This mostly allows unsigned/signed mismatch warnings to be less noisy even if they aren't on by default.
- Remove misplaced llvm_unreachable.
- Add static to a declaration of a function on MSVC x86 only.
- Change some instances of calling a static function through a variable to simply calling that function while removing the unused variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150364 91177308-0d34-0410-b5e6-96231b3b80d8
to what's done for MachO and COFF. This allows advanced uses of the class to
be implemented outside the Object library. In particular, the DyldELFObject
subclass is now moved into its logical home - ExecutionEngine/RuntimeDyld.
This patch was reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150327 91177308-0d34-0410-b5e6-96231b3b80d8
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149668 91177308-0d34-0410-b5e6-96231b3b80d8
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149481 91177308-0d34-0410-b5e6-96231b3b80d8
ELF and MachO implementations of RuntimeDyldImpl go into their own header files now.
Reviewed on llvm-commits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148652 91177308-0d34-0410-b5e6-96231b3b80d8
The MachO file stores section alignment as log2(alignment-in-bytes). The
allocation routines want the raw alignment-in-bytes value, so adjust
for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148604 91177308-0d34-0410-b5e6-96231b3b80d8
The JIT is expected to take ownership of the TM that's passed in. The MCJIT
wasn't freeing it, resulting in leaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148356 91177308-0d34-0410-b5e6-96231b3b80d8
Move to a by-section allocation and relocation scheme. This allows
better support for sections which do not contain externally visible
symbols.
Flesh out the relocation address vs. local storage address separation a
bit more as well. Remote process JITs use this to tell the relocation
resolution code where the code will live when it executes.
The startFunctionBody/endFunctionBody interfaces to the JIT and the
memory manager are deprecated. They'll stick around for as long as the
old JIT does, but the MCJIT doesn't use them anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148258 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
The OptLevel is now redundant with the TargetMachine*.
And selectTarget() isn't really JIT-specific and could probably
get refactored into one of the lower level libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146355 91177308-0d34-0410-b5e6-96231b3b80d8
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146026 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
It was getting ignored after r144788.
Also fix an accidental implicit cast from the OptLevel enum
to an optional bool argument. MSVC warned on this, but gcc
didn't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145633 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
methods but also class methods for Objective-C.
Clang emits Objective-C method names with '\1' at the
beginning, and the JIT has pre-existing logic to try
prepending a '\1' when searching a module for an
instance method (that is, a method whose name begins
with '-'). I simply extended it to do the same thing
when it encountered a class method (a method whose
name begins with '+').
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144451 91177308-0d34-0410-b5e6-96231b3b80d8
