One form would accept a vector of pointers, and the other did not.
Make both accept vectors of pointers, and add an assertion
for the number of elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187464 91177308-0d34-0410-b5e6-96231b3b80d8
The unix one was returning no_such_file_or_directory, but the windows one
was return success.
Update the one one caller that was depending on the old behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187463 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids constant folding bitcast/ptrtoint/inttoptr combinations
that have illegal bitcasts between differently sized address spaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187455 91177308-0d34-0410-b5e6-96231b3b80d8
Call into ComputeMaskedBits to figure out which bits are set on both add
operands and determine if the value is a power-of-two-or-zero or not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187445 91177308-0d34-0410-b5e6-96231b3b80d8
It will now only convert the arguments / return value and call
the underlying function if the types are able to be bitcasted.
This avoids using fp<->int conversions that would occur before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187444 91177308-0d34-0410-b5e6-96231b3b80d8
When registers must be live throughout the scheduling region, increase
the limit for the register class. Once we exceed the original limit,
they will be spilled, and there's no point further reducing pressure.
This isn't a perfect heuristics but avoids a situation where the
scheduler could become trapped by trying to achieve the impossible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187436 91177308-0d34-0410-b5e6-96231b3b80d8
When simplifying a (or (and B A) (and C ~A)) to a (VBSL A B C) ensure that the
bitwidth of the second operands to both ands match before comparing the negation
of the values.
Split the check of the value of the second operands to the ands. Move the cast
and variable declaration slightly higher to make it slightly easier to follow.
Bug-Id: 16700
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187404 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of many upcoming patches for PowerPC fast
instruction selection support. This patch implements the minimum
necessary for a functional (but extremely limited) FastISel pass. It
allows the table-generated portions of the selector to be created and
used, but in most cases selection will fall back to the DAG selector.
None of the block terminator instructions are implemented yet, and
most interesting instructions require some special handling.
Therefore there aren't any new test cases with this patch. There will
be quite a few tests coming with future patches.
This patch adds the make/CMake support for the new code (including
tablegen -gen-fast-isel) and creates the FastISel object for PPC64 ELF
only. It instantiates the necessary virtual functions
(TargetSelectInstruction, TargetMaterializeConstant,
TargetMaterializeAlloca, tryToFoldLoadIntoMI, and FastLowerArguments),
but of these, only TargetMaterializeConstant contains any useful
implementation. This is present since the table-generated code
requires the ability to materialize integer constants for some
instructions.
This patch has been tested by building and running the
projects/test-suite code with -O0. All tests passed with the
exception of a couple of long-running tests that time out using -O0
code generation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187399 91177308-0d34-0410-b5e6-96231b3b80d8
build_vector is lowered to REG_SEQUENCE, which is something the register
allocator does a good job at optimizing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187397 91177308-0d34-0410-b5e6-96231b3b80d8
This patch prevents the following combine when the input vector is used more
than once.
insert_vector_elt (build_vector elt0, ..., eltN), NewEltIdx, idx
=>
build_vector elt0, ..., NewEltIdx, ..., eltN
The reasons are:
- Building a vector may be expensive, so try to reuse the existing part of a
vector instead of creating a new one (think big vectors).
- elt0 to eltN now have two users instead of one. This may prevent some other
optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187396 91177308-0d34-0410-b5e6-96231b3b80d8
update testcase to make sure we generate debug info for walrus
by adding a non-trivial constructor and verify that we don't
emit an ODR signature for the type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187393 91177308-0d34-0410-b5e6-96231b3b80d8
32-bit symbols have "_" as global prefix, but when forming the name of
COMDAT sections this prefix is ignored. The current behavior assumes that
this prefix is always present which is not the case for 64-bit and names
are truncated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187356 91177308-0d34-0410-b5e6-96231b3b80d8
If no other operation is specified, 's' becomes an operation instead of an
modifier. The s operation just creates a symbol table. It is the same as
running ranlib.
We assume the archive was created by a sane ar (like llvm-ar or gnu ar) and
if the symbol table is present, then it is current. We use that to optimize
the most common case: a broken build system that thinks it has to run ranlib.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187353 91177308-0d34-0410-b5e6-96231b3b80d8
Single-slash encoded entries do not require a terminating null. This bumps
the maximum table size from ~1MB to ~9.5MB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187352 91177308-0d34-0410-b5e6-96231b3b80d8
infrastructure to do promotion without a domtree the same smarts about
looking through GEPs, bitcasts, etc., that I just taught mem2reg about.
This way, if SROA chooses to promote an alloca which still has some
noisy instructions this code can cope with them.
I've not used as principled of an approach here for two reasons:
1) This code doesn't really need it as we were already set up to zip
through the instructions used by the alloca.
2) I view the code here as more of a hack, and hopefully a temporary one.
The SSAUpdater path in SROA is a real sore point for me. It doesn't make
a lot of architectural sense for many reasons:
- We're likely to end up needing the domtree anyways in a subsequent
pass, so why not compute it earlier and use it.
- In the future we'll likely end up needing the domtree for parts of the
inliner itself.
- If we need to we could teach the inliner to preserve the domtree. Part
of the re-work of the pass manager will allow this to be very powerful
even in large SCCs with many functions.
- Ultimately, computing a domtree has gotten significantly faster since
the original SSAUpdater-using code went into ScalarRepl. We no longer
use domfrontiers, and much of domtree is lazily done based on queries
rather than eagerly.
- At this point keeping the SSAUpdater-based promotion saves a total of
0.7% on a build of the 'opt' tool for me. That's not a lot of
performance given the complexity!
So I'm leaving this a bit ugly in the hope that eventually we just
remove all of this nonsense.
I can't even readily test this because this code isn't reachable except
through SROA. When I re-instate the patch that fast-tracks allocas
already suitable for promotion, I'll add a testcase there that failed
before this change. Before that, SROA will fix any test case I give it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187347 91177308-0d34-0410-b5e6-96231b3b80d8
standards for LLVM. Remove duplicated comments on the interface from the
implementation file (implementation comments are left there of course).
Also clean up, re-word, and fix a few typos and errors in the commenst
spotted along the way.
This is in preparation for changes to these files and to keep the
uninteresting tidying in a separate commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187335 91177308-0d34-0410-b5e6-96231b3b80d8
uses of an alloca, we can pre-compute promotability while analyzing an
alloca for splitting in SROA. That lets us short-circuit the common case
of a bunch of trivially promotable allocas. This cuts 20% to 30% off the
run time of SROA for typical frontend-generated IR sequneces I'm seeing.
It gets the new SROA to within 20% of ScalarRepl for such code. My
current benchmark for these numbers is PR15412, but it fits the general
pattern of IR emitted by Clang so it should be widely applicable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187323 91177308-0d34-0410-b5e6-96231b3b80d8
useful in a subsequent patch, but causes an unfortunate amount of noise,
so I pulled it out into a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187322 91177308-0d34-0410-b5e6-96231b3b80d8
